About 5 years ago I built one using a loop of wire, tunning diode, a variable resistor, and a 9-volt battery. The diode seemed to work as well as the variable cap but the tuning diode takes battery power. I think I used a resistor to limit current but I'm not sure now. I predict it won't be long because of DSP radios before variable caps in the electronics junkyards or even part stores are hard to find and I found that a tuning diode and a variable resistor can replace them and I got it to work.
Excellent video. I made one using a 14 inch diameter embroidery hoop with regular magnet wire. Also one using a loop cut from the top rim of a 5 gal. plastic pail. (about 1-2 inches wide). They work well. More impressive was a 4 turn 6" diameter coil that I hooked up to my 80 meter half wave end fed antenna. My small radio fits inside the coil.
Nice workmanship on your handmade loops. I think I made 4 for either Am Broadcast or 80 meters. Often I include a sense loop and clip it to or jack it to a loop or two I place around the ferrite rod in the radio. The sense and ferrite loop are not needed but why not if you have the time.
Well, much more compact than my wire antenna, but I just put up a random wire and looped it around my AM radio, the grounded the other end. I DXed stations thousands of miles away.
The results are truly amazing. However, it is not clear how the coil turns are located under the screws of the frame to the base. The winding is in a continuous strip. Do the screws pass through the coils of the wire? Short circuit?
Hi Paul, I am in Sydney, Australia. I am looking for your advice. I don't profess to know anything about radios or their reception. I have recently bought a Tivoli One radio to listen to a particular favourite AM station. I am very happy with it. The station I like is comes through quite clear. There is however a buzz like sound coming through. Is there a simple fix for this buzz? Cheers Art
Q U E S T I O N -- Please clarify and confirm: A Q U E S T I O N --- Please clarify! Regarding the loop antennas for AM - ads on Amazon: Our AM radios have electrical cord, adapter, 4-D battery optional connectors. No jack for external antenna. So how and where must we connect the loop antenna to help diminish the crackling on AM 1150? (FM stations = no problem). Are copper wires the best material for AM/FM antennas? Thanks.
I want to make one using the external antenna connector as opposed to coupling. My radio I use for AM BCB DXing does not have a built in antenna. Any ideas?
Hi Dave, For the AM broadcast band I typically use wire size #46. This comes in several 175, 660, and some lesser strands. Avaiable on Ebay and elsewhere. W1VLF
Great video Sir! Looking forward for more 🙂 I have the AN-200 Loop and thinking of changing the variable capacitor in order to make it resonate on lower frequencies like 2200m so I can receive some FT8 signals down there. Take Care, looking forward for more videos! 🙂 👍 73! DE1CTL
The AN-200 is tricky to open, you should have ordered the AN-100 for this purphose. The variable capacitor do not need to be replaced, just put another capacitor in parallel; it should work with 300 to 500pF.
@@catalinalb1722 ok if the size can fit inside. It has a plastic capacitor. If you are lucky there are more sections that you can put in parallel with a switch without replacing it
Prefer radios that have an additional socket for an external antenna. Thanks for the interesting video!
About 5 years ago I built one using a loop of wire, tunning diode, a variable resistor, and a 9-volt battery. The diode seemed to work as well as the variable cap but the tuning diode takes battery power. I think I used a resistor to limit current but I'm not sure now.
I predict it won't be long because of DSP radios before variable caps in the electronics junkyards or even part stores are hard to find and I found that a tuning diode and a variable resistor can replace them and I got it to work.
Excellent video. I made one using a 14 inch diameter embroidery hoop with regular magnet wire. Also one using a loop cut from the top rim of a 5 gal. plastic pail. (about 1-2 inches wide). They work well. More impressive was a 4 turn 6" diameter coil that I hooked up to my 80 meter half wave end fed antenna. My small radio fits inside the coil.
Friend, I learn something every time I watch your videos. Very intriguing stuff.
Well thank you Mr Ground owl. It is very kind of you to say so. Thank you for watching ! W1VLF
Nice workmanship on your handmade loops. I think I made 4 for either Am Broadcast or 80 meters. Often I include a sense loop and clip it to or jack it to a loop or two I place around the ferrite rod in the radio. The sense and ferrite loop are not needed but why not if you have the time.
That's amazing it could make such a difference with no wires attached! 😮😮
Well, much more compact than my wire antenna, but I just put up a random wire and looped it around my AM radio, the grounded the other end. I DXed stations thousands of miles away.
Yes sir.. That works well. We use what we can for best reception.. Thanks Don.. W1VLF
Thank you. Learned a lot. Want to make one for myself.
Thank you.. I am very glad to hear it. That is the idea of my videos to help others do experiments on there own..!! W1VLF
A great video. I'll look for more of yours videos. 73
Cheers from your newest subscriber from California 😊
Thank you Olin W1VLF
Great job looks good too.
Only works with radios with ferrite rod antennas?
What would you recommend for q halicrafters s38 radio? 17:10
Great video! I learned a lot.
Where may I find schematic for similar loop ?
Можно ли считать, что такая антенна имеет идеальный симметричный выход?
The results are truly amazing. However, it is not clear how the coil turns are located under the screws of the frame to the base.
The winding is in a continuous strip. Do the screws pass through the coils of the wire?
Short circuit?
Hi Paul,
I am in Sydney, Australia.
I am looking for your advice. I don't profess to know anything about radios or their reception. I have recently bought a Tivoli One radio to listen to a particular favourite AM station. I am very happy with it. The station I like is comes through quite clear. There is however a buzz like sound coming through. Is there a simple fix for this buzz?
Cheers
Art
cool work
were can i find that variable capacitor ?
from what divice it come from ?
Its just a standard broadcast band tuning capacitor 365 PF available on eBay Paul W1VLF
@@W1VLF did not see on ebay Paul w1vlf
seen only other seller mostly china
Q U E S T I O N -- Please clarify and confirm: A Q U E S T I O N --- Please clarify! Regarding the loop antennas for AM - ads on Amazon: Our AM radios have electrical cord, adapter, 4-D battery optional connectors. No jack for external antenna. So how and where must we connect the loop antenna to help diminish the crackling on AM 1150? (FM stations = no problem). Are copper wires the best material for AM/FM antennas? Thanks.
I want to make one using the external antenna connector as opposed to coupling.
My radio I use for AM BCB DXing does not have a built in antenna.
Any ideas?
I wonder what would happen if the loop was in the form of a spiral ?
Would it reduce the Q ?
I am attempting to make the 16" loop. Can you tell me what gauge of magnetic wire you used?
22 g wite
I wish someone on eBay made/sold these..
Me too! There use to be a seller on the internet, but he stopped selling them a few years ago.
Excellent demo. Do either the wood or krazy glue sap much rf away from the coil windings?
Not that I have ever noticed. I have built many loops out of different materials. No metal framework .. that would not work
Great Video I notice your wire is litz wire , wat size and number of strain is the wire? Thank You
Hi Dave, For the AM broadcast band I typically use wire size #46. This comes in several 175, 660, and some lesser strands. Avaiable on Ebay and elsewhere. W1VLF
I bet this would work with a crystal set.
Great video Sir! Looking forward for more 🙂 I have the AN-200 Loop and thinking of changing the variable capacitor in order to make it resonate on lower frequencies like 2200m so I can receive some FT8 signals down there. Take Care, looking forward for more videos! 🙂 👍 73! DE1CTL
The AN-200 is tricky to open, you should have ordered the AN-100 for this purphose. The variable capacitor do not need to be replaced, just put another capacitor in parallel; it should work with 300 to 500pF.
@@maxit-mw Thank you, last year I buid my first loop for sw so I have a variable capacitor up to 500pF (double) so I will add that.
@@catalinalb1722 ok if the size can fit inside. It has a plastic capacitor. If you are lucky there are more sections that you can put in parallel with a switch without replacing it
What is an AM band? all bands are AM!
How can I receive signal 3000 km away
With an antenna