FIRST LOOK - 300 Series Electric Tailgate Retrofit / DIY INSTALLATION.

แชร์
ฝัง
  • เผยแพร่เมื่อ 21 ส.ค. 2024
  • What's up guys, yes once again we are the first company with a game changing product, this one being the LC300 Electric Tailgate system.
    Installation was a breeze and we think it is very DIY Friendly, but of course if you need your system installed we are more than happy to help!
    Grab yours here:
    shopt pr...
    If you have any questions, drop a comment below.
    Want to reach out to us?
    www.shoptfb.com
    www.aesonline.com.au
    Follow us on the gram :)
    @nathanstephenss
    @autoelectronicsolutions
    @thefittingbay
    Like the video and SUBSCRIBE :)
    Catch y'all in the next one.
  • ยานยนต์และพาหนะ

ความคิดเห็น • 32

  • @obgmax1429
    @obgmax1429 ปีที่แล้ว +1

    Ok, so I bought one of these. TFB drop ships it from China to your door so don't expect Australian stock. The Chinglish instructions are rudimentary but you can muddle through, but not sure I rate it a 6/10 difficulty. If you have never worked on your car before and have limited skills in routing cables in cars I think it's closer to an 8/10. The remote signal wire clamp is way too small, you need to splice it. Make sure you watch this video a few times as it gives some helpful tips. Recommend a few tools - plastic pry tools, silicone cable lube and some form of cable snake tools. The lift motor grommets are tough to get, you might need to slice them open a little to make it easier, and the power wire routing through the rubber conduit will make you swear, recommend removing it from the tailgate and manipulating the wire through. I consider myself an average handyman and this took me a solid 5 hours to install. It does work though.

    • @TheFittingBay
      @TheFittingBay  ปีที่แล้ว

      Nice run down! We now keep these in stock in Melbourne for your reference 😊

    • @obgmax1429
      @obgmax1429 ปีที่แล้ว +1

      Ok so update. It’s all still working which is good, but I have to say the motors in the lift struts are not Fast enough. This makes it very slow for the tailgate to open and you just end up waiting. Original pneumatic rams are much faster! If I knew this I probably wouldn’t have purchased the electric lift mod. Anyway just thought I’d share in case anyway is considering getting one.

  • @briananddianehardy8598
    @briananddianehardy8598 ปีที่แล้ว

    Thanks Nathan for the supply and installation in our VX 300 Series Land Cruiser, could be happier with it, no more reaching up to close the tailgate 😊

  • @robzaccaria5334
    @robzaccaria5334 ปีที่แล้ว

    Love your work ... updating even the newest of models!!

  • @sungjinpark1421
    @sungjinpark1421 ปีที่แล้ว +1

    Where did you get black grill and back letters very awesome

  • @eL_gAbaS
    @eL_gAbaS ปีที่แล้ว +1

    how about a feature on that 300series..

  • @sungjinpark1421
    @sungjinpark1421 ปีที่แล้ว +1

    I want to know grill and black badges

  • @DanielSilva-sd1fi
    @DanielSilva-sd1fi ปีที่แล้ว

    Excellent content , if you can shed some light about routing the cable from the gate to the front? Any suggestion for the route? Also do you know anything about the black grill and black trim ??? It adds a killer look

  • @semjr.3081
    @semjr.3081 11 หลายเดือนก่อน

    Can you make video how you set the remote as a control for closing and opening.please

  • @samrs3161
    @samrs3161 ปีที่แล้ว +1

    Where abouts do you mount the foot sensor?

  • @markward38
    @markward38 5 หลายเดือนก่อน

    Does the door stop on opening if it meets some resistance behind car

  • @user-su7kx8rj3g
    @user-su7kx8rj3g ปีที่แล้ว

    Any tips on re-seating the rubber grommet in the middle at the rear - where the cables run? The plastic clip is making it challenging to seat the rubber into the boot.

  • @user-sb8fz3ps7v
    @user-sb8fz3ps7v ปีที่แล้ว

    Where did you hook your fused power to ? With the fuse tap the fuse cover can’t go back on

  • @semjr.3081
    @semjr.3081 11 หลายเดือนก่อน

    Can you close the tailgate manually after fitting this kit?

  • @GiangNguyen-vs9jd
    @GiangNguyen-vs9jd ปีที่แล้ว

    Thank you for your tutorial! I’m making tail lamp converter wiring to install addition rear fog lamp. Can you give me LC300 tail lamp wiring diagram?

  • @davidhill1320
    @davidhill1320 ปีที่แล้ว

    Hi where would i get a kit for my range rover sport 2010

  • @semwanjeshafiq7742
    @semwanjeshafiq7742 ปีที่แล้ว

    How much is that system boss I want to get it for my clients please

  • @blueplanet1048
    @blueplanet1048 ปีที่แล้ว

    This is so weird we have electric tailgate on every trim.

  • @brandonstephens2809
    @brandonstephens2809 ปีที่แล้ว

    Awesome!

  • @jaclynjonathan5763
    @jaclynjonathan5763 ปีที่แล้ว

    Is there a way to adjust the tailgate/ lock as mine is not locking and sucking in correctly

    • @user-sb8fz3ps7v
      @user-sb8fz3ps7v ปีที่แล้ว

      Did you end up working this out I’m having same issue

  • @tamtruong2356
    @tamtruong2356 ปีที่แล้ว

    Would you ship it to Perth?

  • @akhilitty2616
    @akhilitty2616 ปีที่แล้ว

    Hi do u have any service in Queensland

  • @akhilitty2616
    @akhilitty2616 ปีที่แล้ว

    Can u put the link to where to buy I haven’t found the link
    Thank you

    • @glennbrown3624
      @glennbrown3624 ปีที่แล้ว

      Expand the description above "Show more" and the link is right there !!

  • @FRon-js4to
    @FRon-js4to ปีที่แล้ว

    Hi Wondering price and how do we order this for our LC300 VX Thanks Ron

    • @TheFittingBay
      @TheFittingBay  ปีที่แล้ว

      Hey mate all here www.shoptfb.com

  • @aussieadventurestimetoplay
    @aussieadventurestimetoplay ปีที่แล้ว

    I just want android auto in my Fortuner Crusade 2019

  • @ppal64
    @ppal64 ปีที่แล้ว

    Fairly unnecessary.

    • @jamon2932
      @jamon2932 ปีที่แล้ว

      When the tailgate is covered in mud or dust it is nice to not have to get your hands dirty closing the tailgate.

  • @user-sb8fz3ps7v
    @user-sb8fz3ps7v ปีที่แล้ว

    Where did you hook your fused power to ? With the fuse tap the fuse cover can’t go back on