if you unscrew the 4 nuts from inside the car with the boot closed gravity would help them come straight down same when putting them back in. you could just use tape to hold the spoiler in place. looking forward to the next video.
I have the same issue with delamination of the clearcoat. It began initially on the spoiler, but a couple years later it has delaminated in numerous places scattered throughout the body surface. It's not a pretty sight. Unfortunately, daily exposure to the Australian sun can't be avoided in my situation.
Grazie davvero per il video molto utile. Il mio terzo stop si è crepata la plastica rossa per lungo e vorrei cambiarlo. Volevo chiedere cosa hai usato per svitare i bulloni che tengono fermo l'intero alettone senza che ti vadano dentro il portellone. Ci sono chiavi a calamita per svitare quei bulloni? Grazie
Welcome, you can do it with regular tools just be very careful not to drop them, or you can even put a piece of paper, or piece of raw rubber to hold the screw so it doesn't drop.
@arcgarage Thank you. And is the aileron stuck once the bolts are removed? does it have to be forced a lot or with some leverage? or do you just lift it with your hands? Thank you
Hoce biti mozda skoro video o sportskim pragovima sa strane? Takodje, sta preporucujes za sredjivanje sitnih ostecenja boje na braniku od kamencice gde je pocelo da se skida sloj crvene farbe i ostaje belo ispod samo?
looking forward to the clear coat vid thumbs up
Thanks. You and me both
Great video and the step by step instructions. Would love to see the clear coat repair and the completed job.👍🏻
Thanks, it's coming soon
if you unscrew the 4 nuts from inside the car with the boot closed gravity would help them come straight down same when putting them back in. you could just use tape to hold the spoiler in place.
looking forward to the next video.
Great tip
I have the same issue with delamination of the clearcoat. It began initially on the spoiler, but a couple years later it has delaminated in numerous places scattered throughout the body surface. It's not a pretty sight. Unfortunately, daily exposure to the Australian sun can't be avoided in my situation.
I figured I am going to have the same issue, but I hope I will find the solution
Great video, bro. Please do a video showing us how to deal with the clearcoat problems.
Thanks, will do
What hand tool do you use to remove the Lug bolts, can’t find that specific one
Grazie davvero per il video molto utile. Il mio terzo stop si è crepata la plastica rossa per lungo e vorrei cambiarlo. Volevo chiedere cosa hai usato per svitare i bulloni che tengono fermo l'intero alettone senza che ti vadano dentro il portellone. Ci sono chiavi a calamita per svitare quei bulloni? Grazie
Welcome, you can do it with regular tools just be very careful not to drop them, or you can even put a piece of paper, or piece of raw rubber to hold the screw so it doesn't drop.
@arcgarage Thank you. And is the aileron stuck once the bolts are removed? does it have to be forced a lot or with some leverage? or do you just lift it with your hands? Thank you
Great job brother! Does the 3rd stop light disassembles to change any worn lamps?
Thank you, it is essentially LED strip and it needs to be replaced as a whole
@@arcgaragethank you for your reply budd! I guess i'll have to replace it as a whole! Keep up the good work!!
@@Futurensen Will do, thanks
Hoce biti mozda skoro video o sportskim pragovima sa strane? Takodje, sta preporucujes za sredjivanje sitnih ostecenja boje na braniku od kamencice gde je pocelo da se skida sloj crvene farbe i ostaje belo ispod samo?
Hoce, taman sam ugrabio slobodnog vremena pa kontam da cu ubrzo, a za ostecenja koristim orginal farbu sa kistom
Thanks!
Thank you