Dude this is amazing. I've been going crazy trying to figure out how to map the knobs and pads on my LX25+ in FL, and I finally got it. Thanks, you are awesome!!
Nazdar Vite, moc dekuju za to perfektni vysvetleni a o sdileni znalosti. Tez jsem ted u toho kapitolu ''steppin up the game'' 😁 Takze si v klidu brzi na ten tvuj kanal musim musim podivat. Odebral jsem te. Doufam ze zde budes jeste aktivni kdyz mas druhej kanal 🤠
Great video! Got the 49+ on order from Amazon as we speak (not coming for a while though). Been implementing FPC into my work flow. This helps me in advance of the new Nektar MIDI + in the short term just using my laptop keys for the FPC. I kept losing the mapping. Thanks!
After you link to computer the master knob, when you select mixer make sure on your screen you select Master. Then all will function as preset. if you select Eg: insert 4, it means you link insert 4 and volume knob to the same insert.. you literally have 2 knobs for it. (2 switches to 1 light with same effect) but Main Master does not move.
Copied from another thread, in case anyone needs it.....it works! Cheers for the video Vit. "I found how do that, you need fl studio 11.1.1 + . go to FL Studio 11/12 > System > Config > Mapping > Generic > Controller presets and then you will have a file named: Nektar Impact series.flmapping Copy that file to the next folder: FL Studio 11/12 > System > Hardware specific > Nektar Impact series. go in fl studio and then to the MIDI setting and where you see 'generic controller' replace it with Nektar Impact series !"
'm the same midi keyboard as you, but it will be displayed on my FL Studio20, but I don't know why I can't use it. Where can I download the driver of FL Stoudio20?
Hi Vit, firstly many thanks for your tutorial. I have a nektar impact lx88+ and fl studio. My question is can I trigger loops with the pads and if so how can I do this? Thanks 👍
@@ados1980cz Hi, not to worry. I'll do some research and see how it goes. Thanks again for the other tutorial, helped me out a lot when I first started with this keyboard 👍
hi,how can i play fpc on pads,and piano on keys? because i can playit toghter,but when i play the keys is also play me the fpc,how can set up pads only for fpc?
Just couple of weeks ago, yep. Wanted to compose some music and used that setup again. It was a pleasure. I had momentary GAS and wanted to sell the Nektar and buy well priced Akai MPK261, but glad I have not done that. The Nektar does what I need. No need to experiment and burn money at the moment.
Thanks thanks thanks for this video, man! I Have a problem with my footswith ... the note are infinite or don´t work ... what is my problem? You Know? Thanks again
Dude this is amazing. I've been going crazy trying to figure out how to map the knobs and pads on my LX25+ in FL, and I finally got it. Thanks, you are awesome!!
Really inspiring, man. Thank you a lot!
Thanks for the sharing man. I kept trying and trying and now I get th workflow
You welcome, take care.
Nazdar Vite, moc dekuju za to perfektni vysvetleni a o sdileni znalosti. Tez jsem ted u toho kapitolu ''steppin up the game'' 😁 Takze si v klidu brzi na ten tvuj kanal musim musim podivat. Odebral jsem te. Doufam ze zde budes jeste aktivni kdyz mas druhej kanal 🤠
Great video! Got the 49+ on order from Amazon as we speak (not coming for a while though). Been implementing FPC into my work flow. This helps me in advance of the new Nektar MIDI + in the short term just using my laptop keys for the FPC. I kept losing the mapping. Thanks!
You are welcome.
finally better than official FL and nektar setups
Yesss this is the video I needed thank you so much!
You welcome, take care.
Thanks!!! It helps me alot with my LX25+ in FL Studio.
You welcome, take care.
Brilliant video…you’re amazing!
THANK YOU VERY MUCH.
EVENTUALLY A VERY GOOD TUTORIAL TO BASIC STUFF
You welcome.
This is nice review. Thank you. 👏🏻
After you link to computer the master knob, when you select mixer make sure on your screen you select Master. Then all will function as preset. if you select Eg: insert 4, it means you link insert 4 and volume knob to the same insert.. you literally have 2 knobs for it. (2 switches to 1 light with same effect) but Main Master does not move.
This is life saving
8:56 these controls are not mapped in the current FL 20. How do I map them?
Great! I have my nektar LX88+ for long - but now I know to set it up easily. How to assign the turning knobs is missing.
Assign the turning knobs same way as sliders.
Hi Vit, thnx for the video
Great video thanks
I have an LX25+ that won't link the keyboard keys to the fl studio at all........any thoughts?
Copied from another thread, in case anyone needs it.....it works! Cheers for the video Vit.
"I found how do that, you need fl studio 11.1.1 + .
go to FL Studio 11/12 > System > Config > Mapping > Generic > Controller presets
and then you will have a file named: Nektar Impact series.flmapping
Copy that file to the next folder: FL Studio 11/12 > System > Hardware specific > Nektar Impact series.
go in fl studio and then to the MIDI setting and where you see 'generic controller' replace it with Nektar Impact series !"
Glad that you figured it out...
@@hailtodeking9576 thanks bro 🙏
Excuse me, can the blogger release an IMPACT LX61+ download driver to connect to the FL Studio20 teaching video?
'm the same midi keyboard as you, but it will be displayed on my FL Studio20, but I don't know why I can't use it. Where can I download the driver of FL Stoudio20?
Hi Vit, firstly many thanks for your tutorial.
I have a nektar impact lx88+ and fl studio. My question is can I trigger loops with the pads and if so how can I do this? Thanks 👍
Hi, it has been a while since I tinkered with it. I think it can be done but I would have to spend some time researching it myself.
@@ados1980cz Hi, not to worry. I'll do some research and see how it goes. Thanks again for the other tutorial, helped me out a lot when I first started with this keyboard 👍
How do i go through vst presets in the keyboard instead of using my mouse to go through sounds
Hi, sorry, it has been a while since I played with it.
Thank you 💯💯🙏🏼🙏🏼
hi,how can i play fpc on pads,and piano on keys?
because i can playit toghter,but when i play the keys is also play me the fpc,how can set up pads only for fpc?
Sorry it has been been a while since I played with it. Not able to help here.
@@ados1980cz thanks you 😄
Do you still use this?
Just couple of weeks ago, yep. Wanted to compose some music and used that setup again. It was a pleasure. I had momentary GAS and wanted to sell the Nektar and buy well priced Akai MPK261, but glad I have not done that. The Nektar does what I need. No need to experiment and burn money at the moment.
Does is it work completely fine with full integration in fl 20.9 or later?
I would think so. Was not playing around with it lately.
@@ados1980cz bro can u confirm im actually buying it
Like I said. I think so but not going to get out of my bed just now and start testing it for you, working tomorrow in the morning. Sorry.
Thanks thanks thanks for this video, man! I Have a problem with my footswith ... the note are infinite or don´t work ... what is my problem? You Know? Thanks again
Sorry but don't know what could the problem be.
Which version of fl studio are you using? Thanks
20+
Is sound card is necessary for to avoid time delay
Some soundcards have better latencies than other I believe but it may also depends on your CPU processing power.
My record bottom can't map how to fix that sir ? Please tell
Solution mila kya?
@@AmanXdeep yes go it
@@sahilsinghnegi671 firmware installation krna padta hai. Manual padhna sab sorted ho gya mera to
@@AmanXdeep no we just have to place the file of nectar midi in genric and it will map everything
@@sahilsinghnegi671 Pata nahi meine to iska firmware bhi instal kiya hai. Website pe milega wo register krke
🙏🏾
the play Botton and undo and forward and backward don't work when I press it on the mid why? it fl studio can't pick it up