Lighting a Pipe Burner

PBM125 - Straight Pipe Burner 1 1/4" ID in 32", 44", 56", or 68" lengths
● We stock 32", 44", 56", and 68" pipe burner assemblies, also called
stick burners or tube burners, (as measured from one end of the
pipe to the opposite end of the pipe's threads.)
● The pipe burners are 1.25"ID and 1.5"OD with a standard schedule
40 pipe wall thickness. These assemblies include a welded end cap
at one end and a venturi at the other end.
● For supporting the assembly we recommend a cradle out of a well
supported length of angle iron. A cradle support will permit easy
removal of the burner unit for cleaning, when necessary.
● Our pipe burners have been engineered and tested to give a even,
high heat blue flame across the length of the pipe and they easily light.
● The first 8" of the pipe is used as the "throat" of the burner and does
not have any holes for flames. This space is required for the air and gas to mix efficiently in order to have a nice blue flame. Don't waste propane using a pipe burner that burns an inefficient yellow flame.
● Pipe Burners can be run by High Pressure Propane, Low Pressure
Propane, or Natural Gas.
● For High Pressure use we recommend the COM3 regulator/hose.
● For Low Pressure use we recommend the COM5 regulator/hose.
● Also available with an Optional Needle Control Valve with Orifice.
Weight Weight w/LEGS
● PBM125-32" has 24" of flame 8# 10#
● PBM125-44" has 36" of flame 10# 12#
● PBM125-56" has 48" of flame 12# 15#
● PBM125-68" has 60" of flame 15# 18#
If you would like TejasSmokers.com to weld permanent 1/2" diameter round support legs along the length of your pipe burner then order the unit with "LEGS" at the end of the part number, as shown in the drop down box to the right.
Free shipping within the 48 contiguous U.S. States.
Give us a Call @ [phone]
We are open Mon-Fri
from 9 a.m to 6 p.m Central Time
and Sat 10 a.m to 4 p.m
See more @
tejassmokers.com/

[@mpalaskokkalis1476]

Perfect.

[@kitchenkitabersama573]

Gooood...👍👍👍

[@DDSRdds]

Can you use this in a homemade brick oven , Can it Reach 400 + degress👍thanks

[@zapz2101]

hi i want to build a coffee roaster but i have no idea of what are the best burners for that aplication. my roaster will be a 3 to 4 feet drum. can you help me on this?

[@micheleotto9494]

sorry please ... I ask you for information about your technique: the different setup configuration used between high and low pressure, for the two different pressure regulators, is given using pipes of different diameters? are the holes also of different diameters?

[@abdullahigidado3235]

Good day sir please how do I get this thermostatic control a pipe burner

[@asmadbuchori1988]

cool , do you have branch in Jakarta?

[@fablan3308]

Looking for high pressure gas burner to go in my pizza oven it's an outdoor oven and it's approximately 500 500
need a large flame
can you advise me which one to buy and you sell them

[@skipper3069]

Hello, how much is the 36” with the stand and shield.

[@isidoroquinonez654]

Where Can I Buy Flame or Air Control .Like The One In The Video.? In The Fresno California Area.? Where Can I Order it.? Thankyou

[@jamesparson4375]

How long can you make a pipe burner wate side orifice do you use wate side bit do you use todrill

[@micheleotto9494]

if you like to share information about the measures lengths diameters I would be grateful ....

[@AscensionBelow]

Thanks for the recommendation YT. 😐

[@OpsBlack98]

Is that available for sale?

[@JoseGarcia-mm2lo]

Cuánto salen esos kemadores y al distancia los tengo k poner para una parrilla para pollos asados

[@abdel-hadikaddourn2bricola725]

❤

[@lionelthompson9916]

It would have been better if you would have spoken In this

[@jah5075]

Thumbs Down 👎