Download the free AutoCAD practice drawing eBook containing the fully dimensioned drawing used in this video here: sourcecad.com/autocad-practice-drawings-with-pdf-ebook/
Thank you. I learned a few new commands following along. Also, please explain how you came up with the reference dimensions in the future. We would like to replicate this method with other gears of different dimensions...
I still can't understand this. I'm using a 2020 cad . I've done the same way you did still I couldn't get the one in the video . How come I can't even copy a thing
Another great tutorial.. been following these tutorials a while now and im starting to get pretty good and fast in it.. all thanks to your tutorials..! great job you doing!
Can you please explain how to disable the associative feature in AutoCAD 12? It is impossible to insert the fillets on the sprockets with this feature which is the default and I do not know how to disable it. Thanks
Hi! I am a beginner and I already have problems in how to make this sprocket. Could you show me how to do it, on a video? I really will appreciate your help. Begin by drawing the 12.25- and 11.25-diameter circles centered on the same point near the middle of your display. To construct the sprocket teeth, draw a line using the Quadrant object snap to locate the point at the top of the 12.25-diameter circle. The second point can be straight down so that the line crosses the 11.25-diameter circle. The exact length is insignificant because you will trim the line back to the inner circle. Offset this line .1875 on both sides. Trim the first line, and trim and extend the other two lines to the inner and outer circles. Create a polar array of these lines and trim them to create the teeth. Draw the 10.25 B.C. on the Centerline layer. Draw a line from the center to the quadrant. Use grips to rotate and copy the line to 30° and 60° for the 0.75-diameter circles, and 20° and 70° for the inside cutout. Draw two circles where the centerline intersects with the bolt circle. Construct a polar array to get the proper hole pattern. Draw the 7.44-diameter circle and the 3.25-diameter circle. Trim to construct the cutout geometry.
where can I find a data sheet for the circles and offsets numbers for different gears like the 8 tooth gear !!!? please help me .. I have a homework on this !
Hi. Thanks for this nice tutorial. How can I turn a spline into a polyline on autocad 2008? And what happens if I don't convert it? What's the purpose of you doing it here?
great videos thanks a lot.i wuuld like to make a question. you choosed the distances between the constructions line by your self?or you calculate them somehow, because there are 18 teeth in the sketch. in your site it doesnt define the distances
Hi, I think I can answer your question. A gear of 18 teeth at 3.333" outside diameter would be a 6DP gear. An 18 tooth 6 DP gear has a pitch diameter of 3.000" .Which is the figure used. He has set the chordal thickness at 0.260". This equates to a pressure angle of 14.5 degrees. All this info can be found in the Machinery's Handbook. I must be missing something though as I make the root diameter to be 2.614" not 2.571".
hi sir thank you for this tutorial, I learned a lot of new commands (for me). but you are going too fast. I guess because I am a beginner. hopefully next time please slow down. thanks again
To be honest, not enough explanation. "Click this, chick that, chick this" is not a good tutorial. We don’t know what these things are, you need to explain at each step.
I understand that as a beginner you need to know a lot about different tools and commands but explaining them in a practice video like this one will make it of more than one hour and that is not always good for all type of users who are already aware of those basic tools. Still here is a free set of AutoCAD basic videos that you can follow to learn all about the basic tools and commands. www.thesourcecad.com/autocad-tutorials/
@@sourcecad problem isnt about commands and basic tools .we beginners dont understand drawing..you should explain how do you get this number what are you drawing. best regards
FREE sheet metal, gears, curves and others www.onlinecadtools.com/myindex_en.HTM www.onlinecadtools.com/english/html/sheet_metal/index.HTM www.onlinecadtools.com/english/html/index_gears.HTM www.onlinecadtools.com/english/html/index_curves.HTM www.onlinecadtools.com/english/html/index_st.HTM th-cam.com/video/7W1_jJ1XWzo/w-d-xo.html th-cam.com/video/T-irEOEON2w/w-d-xo.html Thanks! I need advertising and orders
What a long winded way to create a spur gear, For Mechanical design it really needs to be a Parametric Mcad software such as Siemens Nx or many others. 2d is a pain in the arse.
![[UNCUT]"ทักษิณ" โชว์ฤทธิ์-ครอบครอง "อุ๊งอิ๊ง" ประเทศไทยมีนายกฯ 1แถม1 I คนดังนั่งเคลียร์ I 23 ส.ค.67](http://i.ytimg.com/vi/Uyl4y59R-Sk/mqdefault.jpg)
Download the free AutoCAD practice drawing eBook containing the fully dimensioned drawing used in this video here: sourcecad.com/autocad-practice-drawings-with-pdf-ebook/
which unit did u use for this drawing ?
Sir I want practice for bus interior and exterior layout design
I just want to say , you are the best at explaining AutoCAD it has been so hard for me to learn but after you taught me
It’s so much easier
Thank you so much for all your exercises you're doing for us ,when I'm free I'm doing some of your exercises and it has helped me a lot in my studies
Thank you. I learned a few new commands following along. Also, please explain how you came up with the reference dimensions in the future. We would like to replicate this method with other gears of different dimensions...
FANTASTIC STEP BY STEP IT ALL ADDS UP . Thank you
Great video!!! As we would say in high school "the dreaded gear lesson"
I'm truthfully surprised it's even that involved and not just a matter of selecting a gear tool and entering in the measurements you need
I still can't understand this. I'm using a 2020 cad . I've done the same way you did still I couldn't get the one in the video . How come I can't even copy a thing
Another great tutorial.. been following these tutorials a while now and im starting to get pretty good and fast in it.. all thanks to your tutorials..! great job you doing!
Thank you dor this wonderful explanation sir. Can i know why should we use a polyline instead of a line in that place?
Very helpful, fast and precise, very thanks!
can you please explain how those dimensions are taken in brief
Thanks for the great video.
Where did you get the original unit sizes from ?
Love your content. Helped me understand how to use AutoCAD even more!
You should explain the explode button while making fillet
You should explain why it has that dimensions. It makes the viewers confused.
The values doesnt matter , you can use arbitrary values.
Thanks Mr.
Excellent work done.
I hope next time, to explain how u select radius size
@@user-cv6xw2ej3p Read Mechanical Engineering books for Theory of Machines
Specific dimensions may help us a lot.
Im having an autocad hiring job test in a couple of days. Which drawings u think i should practice?
In these video I learned more about polar array.
*this
Can you please explain how to disable the associative feature in AutoCAD 12? It is impossible to insert the fillets on the sprockets with this feature which is the default and I do not know how to disable it. Thanks
Sir how can u decide dimensions of all.. plz sir give me idea about that plz 🙏
You can read it in Mechanical Engineering Books for Theory of Machines
Astonishing
This video is very helpful!
In what units is this drawings?
Thanks
Hi! I am a beginner and I already have problems in how to make this sprocket. Could you show me how to do it, on a video?
I really will appreciate your help.
Begin by drawing the 12.25- and 11.25-diameter circles centered on the same point near the middle of your display.
To construct the sprocket teeth, draw a line using the Quadrant object snap to locate the point at the top of the 12.25-diameter circle. The second point can be straight down so that the line crosses the 11.25-diameter circle. The exact length is insignificant because you will trim the line back to the inner circle.
Offset this line .1875 on both sides.
Trim the first line, and trim and extend the other two lines to the inner and outer circles.
Create a polar array of these lines and trim them to create the teeth.
Draw the 10.25 B.C. on the Centerline layer.
Draw a line from the center to the quadrant.
Use grips to rotate and copy the line to 30° and 60° for the 0.75-diameter circles, and 20° and 70° for the inside cutout.
Draw two circles where the centerline intersects with the bolt circle.
Construct a polar array to get the proper hole pattern.
Draw the 7.44-diameter circle and the 3.25-diameter circle.
Trim to construct the cutout geometry.
Simply great..👍
How to use short cuts.and explain detailed ,i can't understand.
where can I find a data sheet for the circles and offsets numbers for different gears like the 8 tooth gear !!!?
please help me .. I have a homework on this !
Nice presentation
Hi. Thanks for this nice tutorial. How can I turn a spline into a polyline on autocad 2008? And what happens if I don't convert it? What's the purpose of you doing it here?
you're a god. Thank you.
Really very helpful 👏
nice job, buddy..
U didn't tell how to calculate those offset values based on given gear profile values...
great videos thanks a lot.i wuuld like to make a question. you choosed the distances between the constructions line by your self?or you calculate them somehow, because there are 18 teeth in the sketch. in your site it doesnt define the distances
Hi, I think I can answer your question. A gear of 18 teeth at 3.333" outside diameter would be a 6DP gear. An 18 tooth 6 DP gear has a pitch diameter of 3.000" .Which is the figure used.
He has set the chordal thickness at 0.260". This equates to a pressure angle of 14.5 degrees. All this info can be found in the Machinery's Handbook.
I must be missing something though as I make the root diameter to be 2.614" not 2.571".
Great Video !!
in minute 5:18
I don't know why did you convert spline line to polyline
you can make Arry on it without converting.
thanks
Do you know why we do the polyline?
Thanks!
I bought your course on Udemy! Thank you!
Why is that associative needs to be turned off when doing polar array?? What is its function?
awesome video my dear brother
Why did u change the spline to polyline? And can we not use offset commands instead of construction lines
Do you know why we do the polyline?
While using array how can we justify the distance between 2 circles?
Hi I am working in an Automatic Doors company in GULF county I want to know how to draw isometric view of roll-up doors with it's profile
hi sir thank you for this tutorial, I learned a lot of new commands (for me). but you are going too fast. I guess because I am a beginner. hopefully next time please slow down. thanks again
كيف؟
Good Job
What if I want to rotate this gear
pls tell why the offsets are different and why three circles what are these circles called
We can try to open and edit the drawing with our mobile phone
Bro for 3:58 that fillter not working and .. Both lines are not joined y bro ?
great video
please show the dimensions in the first plan of object you are showing
I tried many times but fillet command is not working.
Thankyou sir!
sir could u plzz upload video on how to draw dome structutre in detail
dimensions are different because mine was a bit smaller. I referring to the circles they have more space than yours.
Thanks so much bro..
What is the unit you used in this drawings
Tx for sharing
Thanks for you.
why did u take .047 as offset
Very Goods Job
nice
Awesome
Thank you
Thanxxx... Bhai
I have your pdf....in that pdf drawing no 24 I have the dimensions for this gear..but I don't know how to utilize that dimensions
Could you pls share the pdf?
Very good
Sir fillet nhi bn rha 3.57 minute pe
Thanks
Your plans are better please draw some more plans in civil
How to get fillet? I dont know whats the formula for it. Anyone?
Thanks for help me
Bravo 👍
To be honest, not enough explanation. "Click this, chick that, chick this" is not a good tutorial. We don’t know what these things are, you need to explain at each step.
I understand that as a beginner you need to know a lot about different tools and commands but explaining them in a practice video like this one will make it of more than one hour and that is not always good for all type of users who are already aware of those basic tools. Still here is a free set of AutoCAD basic videos that you can follow to learn all about the basic tools and commands. www.thesourcecad.com/autocad-tutorials/
@@sourcecad problem isnt about commands and basic tools .we beginners dont understand drawing..you should explain how do you get this number what are you drawing.
best regards
if i unrolled some of this course for nine dollars ,do you explain in one of this course how to better understand drawing?
@@sourcecad your explenation too bad you arent good teacher , you need to do some thing better
why is the associative option kept unchecked ?
FREE sheet metal, gears, curves and others
www.onlinecadtools.com/myindex_en.HTM
www.onlinecadtools.com/english/html/sheet_metal/index.HTM
www.onlinecadtools.com/english/html/index_gears.HTM
www.onlinecadtools.com/english/html/index_curves.HTM
www.onlinecadtools.com/english/html/index_st.HTM
th-cam.com/video/7W1_jJ1XWzo/w-d-xo.html
th-cam.com/video/T-irEOEON2w/w-d-xo.html
Thanks!
I need advertising and orders
it just looks like a gear.
please specify units in the diagram like in old examples
For this example, it doesn't really matter what the units are, as long as you are consistent. you can use mm, inch, meter, etc.
please explain where i get dimension
D enter
Sourcecad. Con
Nice
nice and easy
Thanks Chaitanya
Tq
FILLET CAN'T USE
which version do you use?
2016 ok thanks bro now i am understand
hi.. Doesn't seem to work in LT2018 either
@@onlooker251 try 2019 or draftsite
@CAD Baselines no
your measurement on your free book lacks given,you didnt put the .062 radius on root
fillet
Agree 👍
Abang abang india emang beda
can you tell me how to take the units for the tooth
write unite in the beginning then chose unites you need it
Plz script kese banaye vo detail me batae
Isnt Accurate.. You need calculation
Fillet comment not work
It's very complicated way...there are some easy way in you tube
0.062 ???
sirrr i cant use fillet command on these teeth
What a long winded way to create a spur gear, For Mechanical design it really needs to be a Parametric Mcad software such as Siemens Nx or many others. 2d is a pain in the arse.
this is very hard
why can you use fillet? HOWWWWWW? T_T
Explode the array and then use the fillet, it should work.
can us fillet
Explode the array and then use the fillet, it should work.
Your channel looks great, thank you, subscribe to your channel
this is not a real involute gear profile, not good
hello sir
Con