You are the best thing that happened to fresh Cvl Engineers. Hats off to you tenacity to help young engineers in their career beginnings. I am fresher civil engineer myself. Also please make a video on how shuttering is provided, what are the different types of shuttering, supports, etc. Keep inspiring us.
Sir, ek video admixture par banao plz. Isme kya chemicals hote h jo workability badhate h I mean in detail.. This is the basic interview question in every interview
Sir last mai jo bataya apne ki column steel na mile to hilti use krke kaise steel provide krna hai.... Is topic ko thoda acche se video banakar bataiye..... Mere ghar par esa hi hai aur mjhe construction krwani hai.... Please sir request hai apse
Please tell me mere ghar ke chat pe slab beam ka bar Ko extend karke Rakha hai but slab ka koi rod nahi nikala hai pehele ka ground floor ka.Abhi mujhe building Ko extend karna hai kya mujhe slab me hole karke grouting karna padhega please help
Clear Height between plinth beam top and roof beam bottom-11 feets Zone-A-11/4=33 inches Zone-B-11*12-66=132 -66=66 inches There are 6 bars 16mm@4,12mm@2 At zone B top- 2 no of lappings At zone B middle(30 inch below top lapping points)-3 no of lapping At Zone B bottom (30 inch below middle lap point)-1 lapping Whether the above arrangement is allowble? Whether lintel tie beam can be provided any zone? What if lintel tie beam falls on zone-A top area?
Hey i have to make a presentation On topic that a visit to site under construction of foundation Can you plz help me with this Like points to be covered in that and all i have no idea in this plz help
Sr single story ke slab me jo v column h uske sariya sari kat di gyi h, mujhe double story banani h to is conditione column kse khada karenge kyoki thekedarr ne linter level se hi column ki sariya kat di h,
Sir ek doubt hai please clear kardo, contractor ne jo ghar banaya hai usme slab ke upar bar 1.5 ft hi chodi hai second floor ke liye , ab isme kese lap diya jaye , group a me ara hai lap or slab ke just upar complete hora hai , please help
*Good Evening* क्या ये *सम्भव* है कि Plinth Beam के नीचे *9"×12"* का Column हो और Plinth Beam के ऊपर *9"×9"* हो जाए? अगर सम्भव है तो उसका क्या तरीका है... ??? *(Column* के *Steel* को कैसे *Adjustment* करेंगे?)
You should be better .What do you mean koe nhi bataega apko?Bull Shit batane se jyada you are trying that only you have knowledge.Afteer seeing your video i got negativity inspite of positivity
You are the best thing that happened to fresh Cvl Engineers. Hats off to you tenacity to help young engineers in their career beginnings. I am fresher civil engineer myself. Also please make a video on how shuttering is provided, what are the different types of shuttering, supports, etc. Keep inspiring us.
Of course brother soon two three video on it
Thanks brother n please share videos
Thanq so much sir it helps me alot thanq.. Aap jaise log duniya me h to hm jaise freshers ko problem nhi hogi .. luv uh so much sir 😘😘🤗🤗
Sir main fresher Hun aur site engineer mein join karunga October mein. Bahut bariya video Hain sir
kunal sb video dekho aur note rakho ....yaad karoge ke site pe total bta chuka hun site pe jo dikat ayengi na sb btaa chuka hun
@@civilsitevisit okay sir
Verry helpfull thankuso much sir ji....👍❤
I was eagerly searchig for this topic....thank you so so so much sir for uploading regarding the topic.......
Sir, ek video admixture par banao plz. Isme kya chemicals hote h jo workability badhate h I mean in detail..
This is the basic interview question in every interview
Sir last mai jo bataya apne ki column steel na mile to hilti use krke kaise steel provide krna hai.... Is topic ko thoda acche se video banakar bataiye..... Mere ghar par esa hi hai aur mjhe construction krwani hai.... Please sir request hai apse
Very good knowledge thank you
Fantastic sir this is very helpfull for every fresher like me..thanks sir
thanks nikhil but please share
Fantastic
Knowledgeable topic sir
Thanks a lot
Sir zogel dena jaruri h kya
Sir column ki casting krege phir beam ki casting krege. But sir Development bar ko kese set krenge qki column ki to casting ho chuki hy
Agar beam ki wide 400mm hy. Or development length jyada aa gai to .kya column me hole kr set krege ya bar ko cutting kre ge
Please make video on raw material consumption on site
Plz make a detailed video on Cantilever Beam.
Sir 45d dene se hoga???
Best video sir. I like
Sir total 4 slab ka mkan hai aur 3 slab complete huwa aur 4 meter column par slab hai to kitna meter sariya upar rakhe ki 4 slab complete ho?
Band up krna jruri hota h kya sir?
Please tell me mere ghar ke chat pe slab beam ka bar Ko extend karke Rakha hai but slab ka koi rod nahi nikala hai pehele ka ground floor ka.Abhi mujhe building Ko extend karna hai kya mujhe slab me hole karke grouting karna padhega please help
yes ofcourse brother
Sir column me uppe and lower portion tension zone hote hai na?
sir steel and air ka reaction nahi hoga kya??
jab extension k liye rakhte hn
Sir slab ka sariya kaise provide karte hai aur slab Mai crank bar kaha provide karte hai detailed mai
hai video playlist dekho aur lata hun ek video dnt worry soon
Good effort
Column m lap just above SLAB in with in 1/4 zone m provides karta h mne to ese dekha h
haan toh bhai toh btaya ...column ka center a jyta hai na 1m yaha video meh 800 mm tha lap staggered tha toh center ho gya automatically
Clear Height between plinth beam top and roof beam bottom-11 feets
Zone-A-11/4=33 inches
Zone-B-11*12-66=132 -66=66 inches
There are 6 bars 16mm@4,12mm@2
At zone B top- 2 no of lappings
At zone B middle(30 inch below top lapping points)-3 no of lapping
At Zone B bottom (30 inch below middle lap point)-1 lapping
Whether the above arrangement is allowble?
Whether lintel tie beam can be provided any zone?
What if lintel tie beam falls on zone-A top area?
Thank you sir👍👍
Welcome brother keep watching
Joggle ke bare mai batae very fantastic
Thanks brother ..baki accha ni lga brother
Aapki sari video important hote but juggle topic is very very important for R/f
Thanks a lot very helpful 😊
Thanks brother keep watching n please share ❤️
Most usefull video .
Thanks brother keep watching n grow daily
Hey i have to make a presentation
On topic that a visit to site under construction of foundation
Can you plz help me with this
Like points to be covered in that and all i have no idea in this plz help
Sir me new site engineer hu hamare site pe contractor ke engineer lap slap se bilkul thodi si height upar dete h kuch kuch jagah kya ye sahi h.
sir mene sites pe dekha hain ki beam mein lapping ke case mein jyaadatar joggle provide ni karte
Sr single story ke slab me jo v column h uske sariya sari kat di gyi h, mujhe double story banani h to is conditione column kse khada karenge kyoki thekedarr ne linter level se hi column ki sariya kat di h,
Nuvoco Concreto cement roof dhalai ke lie thik hoga ya Acc f2r cement
Yes ACC is best
Mane Nuvoco Concreto use kiya hai ye thik hai n ye pahle lafarge ka tha lafarge worlds big company tha is lie
Sir ek doubt hai please clear kardo, contractor ne jo ghar banaya hai usme slab ke upar bar 1.5 ft hi chodi hai second floor ke liye , ab isme kese lap diya jaye , group a me ara hai lap or slab ke just upar complete hora hai , please help
*Good Evening*
क्या ये *सम्भव* है कि Plinth Beam के नीचे *9"×12"* का Column हो
और Plinth Beam के ऊपर *9"×9"* हो जाए?
अगर सम्भव है तो उसका क्या तरीका है... ???
*(Column* के *Steel* को कैसे *Adjustment* करेंगे?)
135⁰ per side welding karke Jo jata hai ek jagah per strength Na Lage Sara
Sir what is the difference between shuttering, scaffolding and farmworks. Plz make a vedio on it, this always confuses me. Thnx
soon on it ...within in 3-4 days keep watching and keep loving
Sir one dowt sir drawing me joggle me 1:2 iska matlab my hai sir plz batav sir
Usko slope ketni deni hai vo..
Ya column me development ki bar pehle provide kre 🤔🤔🤔🤔
Sir but column is an compression membr na sir
Beam is tension membr
Beam is flexural member
Sir 5.800 ke column me kitna bar lapp diya ja skta hai
ek b ni brother
@@civilsitevisit par -4m hai footing
Good 1
Sir, I want to know the length of L provided at the end of column, for example at footing. Thank you
300mm standard baki as per drwaing
Jauggle ka length kitna lege Jo bend dikhta hai utna patt
jetna lap ayega uske upar se bend
Gd job sir g
Thanks brother keep watching n keep sharing
Sir column m 50d sahi h?
yes 50 d is good
Speching k liye particularly code hota h
Thanks
Thanks sir
Jawab nhi sir
Sir aap ne lap to btata pr kitne angle pe bend kr wo nhe btaya
Bo 45-6o• tak chalega
@@civilsitevisit okay thanks
Nyc sir
Great
thanks brotherr keep watching
@@civilsitevisit pls sir... reply my another comments.
Respect (Y)
Thanks sir
Hme is code chiye
In my view it is not safe to drill at the junction of Beam and Column reinforcement.
I want to job sir
In maharashtra
civilsitevisit.com
Sir please upload a vedio on corner bars & torsion bar which is provided on slab
ofcourse brother soon keep watching
first
Thanks brother keep watching n sharing
@@civilsitevisit 😊
👏
Samjhane ka tarika galat h
You should be better .What do you mean koe nhi bataega apko?Bull Shit batane se jyada you are trying that only you have knowledge.Afteer seeing your video i got negativity inspite of positivity
Thank u so much sir
Thanks sir
👍🏼