How To: Deactivate Component Protection From Your VW Radio Via ODIS
ฝัง
- เผยแพร่เมื่อ 14 ต.ค. 2024
- Component Protection is there to protect your Volkswagen vehicle when a part/item has been changed, damaged or upgraded. But sometimes it can be a pain when you do not know how to remove it as it stops the radio from functioning properly.
This is normally a "Main Dealer" only fix but fear not ... We can provide this service*
*You will be asked for an official invoice or documentation to prove where the replacement parts have come from. Nothing can be done without this as we are an authorised independent services provider.
It is a quick run-through of steps you must take to get your factory radio back up and running. Please bear in mind that you must have access to a dealer with the ODIS software.
#AdvancedInCar #vw #volkswagen #vwpolo #howto #radio #odis #walkthrough
I was damn well about to send this video to my VW dealership. I asked them if they could do this for my new (used) unit I have coming in after the original one got stuck in an endless power boot cycle. They said they've never heard of doing such a thing! Despite so many cars among multiple years having radio issues!
This video is not complete, after you are removing component protection, you are not showing what else will be going on, you are going to be losing 3 features. 1. bluetooth, 2. telephone, 3. car play. thats true i did that to my system and i was thinking everything is ok but when i was testing all features its showing 3 features is not active, which means you are going to have swap/ fec keys to be able to get back 3 features working, but it all depends if your system is is unlocked or stock, If its stock you will be needing swap patching system to be able to set the swap keys that is supporting your car
That’s exactly what happened to mine last week 🤬 Do you gave a way to fix that???
@@melvega1903 I can help fix :)
@@BeterrI am in the same boat. Got protective mode cleared out with ODIS from the dealer but still don’t have Bluetooth / phone / CarPlay. Any tips? Is this still a fix within ODIS? 2016 Tiguan with navigation
Factory radio touchscreen broke… replaced with a used radio and had the dealer remove protected mode… 160$ … and still not Bluetooth / CarPlay / phone / nav. Radio only 👎
is there any solution ? i got that problem
hello, thank you for this great video.
can we use any third party OBD connector to perform that, or do we need the VAS 5054a obd connector to remove the components protection ?
Thanks again and have a great day
Good question, found an answer?
Hello Hou,
Thank you for getting in touch!
Invariably, we always use our VAS 6154 Diagnostic tool with ODIS to preform main dealer functions like Component Protection. We are unaware of any aftermarket device that has the capability for this feature because it has to connect with servers in Germany.
We hope this helps!
Kind regards,
Advanced In-Car Team
Hello Hashkemo,
Thank you for the chase up! As said to Hou, see below 😊
Invariably, we always use our VAS 6154 Diagnostic tool with ODIS to preform main dealer functions like Component Protection. We are unaware of any aftermarket device that has the capability for this feature because it has to connect with servers in Germany.
Hope this helps!
Kind regards,
Advanced In-Car Team
Where about are you and how do I go about booking in. I got a vw caddy replaced the stereo worked for 5 days and now no sound, taken to my local vw specialist who said it couldn't be done, but it worked for 5 days 😂😂
Hi, After component protection removal if I update the firmware would it return back the component protection?
I had to replace my ACC sensor on a mk7 GTI with a second hand unit from a breaker, will this make it work again? Thanks
Hello Shaz,
Thank you for getting in touch and sorry for the delayed reply!
For my team to assist you with your enquiry, we would need you to fill in our contact form so we can do some checks. Please see our link below:
www.advanced-incar.co.uk/contact-us/
Once received, we will be in touch as soon as we can to assist you.
Kind regards,
Advanced In-Car Team
I have replaces my 5f unit, and have component protection active. When i scan the car it shows CP fault code on 5f and 19 gateway. I assume this is normal.
Nice video, what cables are required to connect via odis? Is it the e1000 from dlink?
Hello Christopher,
Thank you for getting in touch!
We are an authorised VAG independent workshop and have access to main dealer diagnostic equipment. This is the reason why we are able to complete these procedures.
We can’t offer any advice on other aftermarket peripherals I’m afraid sorry.
Kind regards,
Advanced In-Car Team
I swapped ECU in Passat B8 and CP became active in 5F. 5F was oryginal component. During CP removal in 5F an error appears from FAZIT "FAZ9484E checksum-1 is incorrect". Installed back oryginal ECU and tried remove CP from 5F again and still same error. Perform 5F online software update, coding, parametrisation, reset, still same error and CP not possible to remove. VIN in 5F is same as the car but still CP active. What to do?
Hello there,
Thank you for getting in touch!
For the team to assist you and provide you with detailed response, we would need you to fill in our contact form. Please see our link below:
www.advanced-incar.co.uk/contact-us/
Once received, we will be in touch as soon as we can to assist you with your enquiry.
Kind regards,
Advanced In-Car Team
Hi, great vid. How this work with having to log in online to the VAG servers to check if the used part is stolen. I didnt see that part. (or was it online all along)
Hello Christopher,
Thank you for getting in touch!
We are an authorised VAG independent workshop and have access to main dealer diagnostic equipment. This is the reason why we are able to complete these procedures.
Kind regards,
Advanced In-Car Team
Hello mate, VW wants to charge me £4k for new 5f unit for my VW Polo GTI 2016. Is there any other way of getting this replaced besides them?
Hello Vince,
Thank you for getting in touch and sorry for the delayed reply.
For my team to assist you with your enquiry, we would need you to fill in our contact form so we can do compatibility checks. Please see our link below:
www.advanced-incar.co.uk/contact-us/
Once received, we will be in touch as soon as we can to assist you.
Kind regards,
Advanced In-Car Team
VW B6 2007 - security protection turn on, on radio, after I had replaced a burned fuze - now radio is stuck bc previous owner lost a code - how 2 unlock/bypass that?
Is it possible to do this with vas5054a clone by buying a geko code?
Informative video, how to change/adapt 5F to different VIN
can you do this remotely if i got my climate control module off ebay?
Hello M V,
Thank you for getting in touch!
For my team to assist you with your enquiry, we would need you to fill in our contact form. Please see our link below:
www.advanced-incar.co.uk/contact-us/
Once received, we will be in touch as soon as we can to assist you.
Kind regards,
Advanced In-Car Team
Hi have you got a link for a cable you used from car to pc?
Hello Shan,
Thank you for getting in touch!
We are an authorised VAG independent workshop and have access to main dealer diagnostic equipment. This is the reason why we are able to complete these procedures.
We can’t offer any advice on other aftermarket peripherals I’m afraid sorry.
Kind regards,
Advanced In-Car Team
Hi, how do I get the software to do this? Thanks.
Hello David,
Thank you for getting in touch!
You'll have to apply to be an independent workshop with the VAG group. Another alternative would be to come and get the work done here with us in Poole, Dorset. Please send us a contact form if you want to discuss getting it done here with us at AIC.
www.advanced-incar.co.uk/contact-us/
Once received, we will be in touch as soon as we can to assist you with your enquiry.
Kind regards,
Advanced In-Car Team
Works with Audi??
Useless