DODGE RAM: P24A4 Particulate Filter Restriction - Exhaust Filter 90% Full / How to regenerate a DPF
ฝัง
- เผยแพร่เมื่อ 19 ธ.ค. 2021
- On this video I will show you how to fix one of the causes of P24A4 and P2002 Trouble code! Exhaust Filter 90% Full!
#ExhaustFilterfull #ParticulateFilterRestriction #HowtoRegenerateDPF - ยานยนต์และพาหนะ
Hi, I fixed my 90% full exhaust filter myself without any computer by following someones suggestion in another post. I only had an eighth of a tank of fuel so I drove to the station and filled up the tank with diesel. I pulled into parking space nearby put the truck in park, took off the parking brake, and maintained the engine e between 1800 and 2500 rpm's. It sure wasn't easy holding my foot on the pedal and maintaining the proper idle. After about 5 minutes the screen message said exhaust filter 80%, then another 5 minutes it went down to 50% then to zero and message said regeneration is complete. Whew, I thought I was going to go into limp mode on the way to the station and have to get a wrecker to tow me to the dealer. But thank you so much for showing the process here. Without the knowledge I learned from this video it would have been a bit more of a challenge.
@AbersonPlastering My Pleasure! I'm glad to hear that you were able to fix your truck and thanks for sharing your experience with us!
Good afternoon Hi! Aberson, I read your message about 90% Full exhaust filters see dealer. I’m very sad because i just purchased my 2014 Jeep Grand cherokee Overland first time to own Ecodiesel. The reason i buy it because of the Gas mileage vs to Gas Hemi V8 engine. But when start driving couples days only city in the about 8 miles total 16 to 18 miles a day. The check engine lights ON and message saying 90% full filter full see dealer 😮 i just purchased 8 days ago and i used 4 times only not on the highway. then my Jeep Overland check engine lights ON. I follow what you said on you’re message now i have 123 Miles Distance to Empty my Gas i just put Diesel Gas 3/4 then Go the parking then shift on the parking and parking brake press gas Pedal until the RPM up to 2000 to 2500 hold 5minutes then repeat again for another 5 Minutes let see if worth to my Jeep Grand cherokee Overland Ecodiesel.
Did you have the take to dealer for particulate full error
@@MrJas6477. No. At least not for a month. My check engine light went on and had to take truck to dealer. They did something emissions wise but the truck did that thing again where it said exhaust filter 90% full so I had to drive to Rio vista anyway so I though I would try it, but I got behind a couple big rigs. Hwy 12 is a 2 lane hwy and trucks were going slow. But I did it. It was nerve racking because I really needed to be going about 65-70 mph to blow out the clog this time. Check it out. It happened even one more time but listen, you have got to run your truck with overdrive off while driving under 45 mph since I started doing this I have not had another issue
You are an honest man. Thank you for this video. I will definitely be doing this if my scanner allows it to. 👍
@alejandrorosales2273 My Pleasure! Thanks
This is the best Regen video I have seen. Great Job friend!
Marnie Schutz Thank you!
I have watched some of your videos, because of that I wish you were by my area I'd trust you my 4 cars eyes closed. Yous knowledge is amazing. Thanks for sharing.
Juan Bernal MY Pleasure! Thanks
This was an awesome explanation and I learned much. Thanks for sharing
Ramon Diaz My Pleasure! Thanks
Thank you K Diagnostics for another great video.
Richard 1 My Pleasure!! I appreciate you, thanks for supporting the Channel!!
Thanks brother. Good info. My wife left our truck with the engine light on and she forgot to tell me time and time again. It was heating up the engine severely.
Jen Diaz My Pleasure!!
I loved this video. Even though it doesn't solve my problem but it's very informative and shows that you are not a selfish person since you even showed us how to do a forced regeneration
@drumskas Thank you!
Awesome in-depth video! Thank you for sharing
Daniel Clark My Pleasure!
excellent diagnostic and detailed explanation about the repair
gabriel lopez Thank you!!
What a great diagnostic, very excellent JOB :)
Lidia Santos Thank you!!
@@KITS_Auto_and_Truck_Repair Will extended warranties paid for DPF replacement? I got Carshield. Thank you very much
@@yasielpupo-perez5323 My Pleasure!! it might! You should call them and ask!
Great job K. I did not see any black smoke so that was a good thing.
Richard 1 yeah!! it didn't put out a lot of black smoke!!
Great explanation of the problem and the fix. Thanks
D Francois Thank you!
I think you were spot on with this vid, thx
William McCaslin My Pleasure! Thanks!
Great video. My exact problem with my Ram 1500. Thank you.
@scottland5406 My Pleasure!
Awesome, video with great detail. Thank you
Chuck Wiggy My Pleasure!!
Thanks for your support bro,really appreciate!
Highest Forward Gear My Pleasure!!
Great job as usual , thanks
Mohammad Al-Gebaly My Pleasure! Thanks!
Love your video , as I'm looking at a 2500 Ram 2000 . Your informative & I subscribed .
@ralphblanda661 Thank you! and welcome to our youtube community!
Great video boss, I appreciated 🙏🏻
@aykancessur8819 My Pleasure!
Very, very experienced diagnosis work, I love it K Diagnostic thank you
Suleman Habib My Pleasure!!
Thanks again for your knowledge
A Chap My Pleasure!!
Great Video Man! Thank you
@angelmunoz2375 My Pleasure!
Great explanation. thank you!
Sonja Larson My Pleasure!!
Thank you. great video
Will D My Pleasure!!
Hi, man. I found your video awesome,you desirve to have only positive feedbacks. I will follow your videos from now on here. Greetings from Bulgaria.
@user-qo6qw7ri5q Thank you and welcome to our youtube community!
Great video!
Sprinler Thank you!
Such a great description on what you did here! Best video I’ve seen. Do you happen to remember the price your customer paid to have this completed?
@chiefsfanaaron Thank you! you can email me at kitsautoandtruckrepair@gmail.com for a quote!
run hotshot secret edt in your diesel it helps a lot and don’t idle your truck run it on interstate once a week for bout a hour get it hot enough to clean your filter it will help alot
murlin Woolum Yes I agree! Thanks for your comment!
I also add 16oz of HSS (Diesel Extreme) - every 3 months with a fill up. My 2017 averages 584 - 652 miles Between regeneration cycles.
@@klforrest573is your check engine light on why is mine on 😓
@@qalv97 I have never had a check engine light.
@@klforrest573 ohh why is mine on ? my truck only has 30k miles
Great video
Mike Zeltner Thank you!
Thank you for the education. Much appreciated. Where do I get a scanner so I can do that to my truck or how far do I have to drive in a freeway to activate the regeneration thank you again, sir
@albertbeci5643 My Pleasure! driving for aboutt half hour at high speed on tthe highway would do!
Good job sharing
Alexander Stefanxandra Swedish My Pleasure!! I appreciate you
Good work than again
Awudu Bannaf Thank you!!
THANKS AGAIN.
sam bitar My Pleasure!!
What I find ironic is, these new emission control systems for diesels end up polluting even more because of forced Regens. I see this all the time with the firetrucks in our fleet.
TFSFireman Lol!
Guys you have to turn your overdrive off while driving thru town or under 45 mph. This will help. Since I started doing this all the time, I have not had another notification. Back when I did have notifications I just reset the system myself by parking in neutral ( not sure if that makes a difference) and pressing the pedal til I reach between 1800 and 2500 rpm. I shoot for 2200. But it’s really difficult, unless maybe if you had a pedal commander it might be easier to nail it. It takes 10”15 minutes to clear the filter down to below 30%
@AbersonPlastering Thanks for your input!
Great video thanks. Question for you: does the regen that you forced use DEF to clean the EGR or is the DEF for another purpose?
Jake DPF Regen only clean the soot in the DPF not in the EGR System!
Thank you so much for this video! My 2022 6.7 came up with the same code. I'd really like to know which scan tool you were using.... Cheers!
OffGridColorado I'm using the snapon zeus scanner!
great video, very helpful. question for you, my dodge 2019 starts regen then stops just as fast. What scanner will let me do it in Park? why isnt this even an option?
@user-bq3nb7mk4f you would need a capable scan tool for that, an Autel scanner would work
Great video. My 2007 ram 2500 6.7 says 100% full loss of power. Then it smoked grey/ white and was deiseling really loud. Was it trying to regenerate and I stopped it? I pulled over cut the truck off and made it home but still down on power. Thanx for any help should I find someone fast with that scan tool u have?
skip McLeod Thanks! I recommend taking it to a shop that can do a DPF Regeneration!
very good explanation and follow along video. so if the truck runs on the freeway it will regenerate on its own without the driver knowing?
@jelendrez3729 yes!
I have a 2014 Ram 3500 6.7L diesel with only 10.4 volts from PCM to MAF. I checked it at PCM (10.4 V) and its supposed to be battery voltage. Have you ever seen anything like this? great videos. keep them coming. thanks for great video information.
bob White it sounds like you have a voltage drop somewhere! check the voltage supply to the PCM, is the PCM getting over 13V with the engine running? if yes, then your problem is voltage drop between the MAF and the PCM
Yu are the best 🙏🙏
Candelario Menchaca Thank you!!
Great explanation brother, what OBD scanner did you use for the regeneration?
GH RIDES Thank you! I use the Snapon Zeus!
@@KITS_Auto_and_Truck_Repair Great question and answer! I will go shopping for the scan tool.
Good job
Benjamin levi Thank you!!
I bought a scangauge II. Program it and so you can monitor your sout level and see if regeneration is on. So you know when to keep driving so it finish a full cycle. This tool can not do a forged regeneration.
DairyfarmMeindertsma Interesting!
Clean the def injection spray nozzle. It builds.up crystals that disrupt the def spray pattern.
Just two 10 mm nuts to remove. Have a def injector gasket handy.. Crystals dissolve with water.
@petermandel2552 Yes!
We just were told we need the partical filter replaced not regenerated; what does this mean. Did we drive too long wand truck didn't auto regenerate? We drive truck alot and at highway speed. PLEAS HELP US UNDERSTAND
Julie D was the DPF removed and tested ?
did this on a 2011 3500 HD (already hit the 4mph limit) customer vehicle, with our macto scan tool a few times, but the idle never completely came back down did come down but never came all the way down.
ran all other tests (verified pump, injector, levels, nox, etc etc) and the only thing i can not do is "reset" the fukkin dpf code (no codes at all just the exhaust fluid screen "service NOW" with 4 chimes...
any thoughts?
Ryan Hensley you need a scanner that's capable of erasing that light!
Just in the shop a few minutes ago, my owns a garage and used the same Snapon Zeus as you did.. he was not able to start de Regen error message security link then lost communication with Truck.. Any Idea..??
Chantal P make sure your network in the car is good!
Ram dealership wanted to charge me approx $9000 to replace exhaust and repair engine. Blaming for dirty filter. Does the Ram 2017 Eco-Diesel have a regeneration option?
Art Sylver it should have it!
Thanks man I’m going to try this because my truck is really giving my problem only at 30k miles lol
@qalv97 My Pleasure!
What is the name and brand of the scan tool that you use which model is it?
R. Mon. I used the snapon Zeus on this video!
Good Evening,
I got this error code on my 2019 Ram 2500 6.7L with 67k. Google is telling me to replace the DPF. I got the engine light on my truck and the truck is telling me that the Exaust Filter is full. Should I replaced completly or should I take out and clean it?
Thank you brother for your advice
Yasiel Pupo-Perez You should do the regeneration process to clean the DPF, you need to take it to a pro mechanic who has a scan tool that can do it!
Hi. I have the 2011 3500 with the same problem right now.
@raulmiranda3325 The DPF needs to be cleaned!
Tried doing my regen on my 2016 Ram 1500 using a scanner. It failed due to not achieving enough high temperature. Any ideas if it is from the blend door actuator?
@adrianmuresan1 NO!
What scanner tool do you use on this video?
@arortiz24 I used the snapon zeus scanner in this video!
wow you doing so good, i have the problem on my 2019 truck can you help me
The Silin's Chanel Thanks! yes I can help!! you can bring your truck to our shop and we'll take care of it for you, email me at Deo@calleva.org for more details!!
Good morning, where you located and address please
Hey I have a 2021 ram 3500 my check engine light came on saying automatic regen. I drove on the haighway for 30 minutes now the dpf level is down 0% but the check engine light is still on. What should I do?
Andrae Allen check engine light should go off by itself or you can disconnect the battery for 10 minutes then reconnect it!
thank you
@jrneff9773 My Pleasure!
@@KITS_Auto_and_Truck_RepairGood afternoon. First Thank you for your time to read my message i’m looking forward to hear from you. About my issue of my Jeep Grand cherokee Overland 2014 Ecodiesel. I have check engine lights on because of the Exhaust 90% full fiter see Dealer. But still rung good. I just purchased a week ago to private seller before i pay it i drove it for 4 miles about 40 mph. everything good no check engine lights ON after couples days drive on the city around 8 to 16 miles for couples days the message show up and check engine light ON. what is your advice what i need to do my Odometer reading now 155K miles do you think still good to keep it or just sell it or trade in?
@@earlcas7620 you should get it cleaned/ do the DPF Regeneration!
Other codes on other modules can be ignored and cleared after saving if they are not affecting driveability.
Richard 1 yes
Did you add some fluid or something??…before you clear the card ?
@sheldon1478 No!
Can you provide the name of you're OBD Scanner please!
@ericalexander2028 I used my snapon zeus scanner in this video!
I have a 2017 Ram 5500 diesel it’s a tow truck it showed it’s 100 full but I drive it a lot on the highway but the truck has 422009 miles on any possible solution?
@nabilbrahim5881 Do a Regen or a DPF Cleaning and see what happens!
Hello there, now engine light popped again three weeks ago. And when i tried the regen, it didnt allowed as I have another code to fix before doing the regen, that is PO545. I waited for sometime. But then yesterday when returning home from work, i heard tac tac sound before engine shut down completely. I had to tow to home. DO YOU THINK MY ENGINE IS BLOWN OFF NOW????
@tenzinnamdhak I don't think so, I recommend you take it to a pro mechanic who can diagnose it for you!
@@KITS_Auto_and_Truck_Repair just curious, what could be the issues?
besides i just saw a video that says that after forced regen in your ecodiesel, it is better to change the oil. Do you agree with that?
What is the least costly scan device that can cause a regeneration? I don’t have a shop so need for personal use,
@paulsibayan9957 you can get a cheap Autel scanner!
You can get Alfa obd like 80$ it can read security pin in RF hub and make keys.
Forced regeneration successful. Faulty codes erased. Still getting warning to see dealer. Mileage warning went from 180 to just under 100 and keeps going down. What to do now?
@adrianmuresan1 you should have it looked at!
I have a Ram 2500 with 200k miles and I had to do forced regen because that message came up. Regen went good But since that I drove for like 60 miles and the dpf filter says it is a 25% full again is that normal? I had noticed that sometimes goes up like that and all of sudden it’s on 0%, but since the forced regen I just want to make sure. Thanks in advance
@rupertolandaverde4984 it sounds like the Regen didn't go through properly, after the Regen your soot level should drop to 0%
@@KITS_Auto_and_Truck_Repair It did went to 0% on the day that the regen was made I noticed that yesterday
I am currently doing regen. My truck is blowing lots of white smoke the whole time and regen has been running 10 minutes. How long your regen last.
auto overdose it depends on DPF Saturation, 8 - 15 minutes!
My brothers was bad 100% full reduced throttle. It took about 12 mins to go from 100% to 90%.
Damn good video brother....
Narf War Thanks!
Men i have a problem with my ecodiesel 2016 ram 1500 .. how I can talk with u guys
Great job I will email you maybe you can fix it dpf problem
@mikeergin6612 Thanks, sure email me at kitsautoandtruckrepair@gmail.com
Can I force my on regyn. My truck is decelerating is saying exhaust service system.
@dildredross9434 Drive it for a while on the highway and see what happens!
This was good. However, I had this 90% clogged message come to my attention as I was driving on the highway for the past 5 hours at highway speeds !! I limped it back to town, the dealership had to do a "manual" re-gen as it wouldn't do it on its own. Now at 1000+ miles later it comes up again, 90% filter clogged. All of a sudden it comes up, "regenerating". So, this time it seemed to work properly and soon came up 70% blocked as I drove into the Dodge Ram dealership. The check engine light went off, the dealership said there were no messages, so I went on my way. Now another few hundred miles later the check engine light comes on again, and as it was Sunday, I went into the auto zone store lot and hooked up their computer. It came back with code P0428 Catalyst Temperature Sensor Circuit High ( Bank 1 Sensor 1 ) . I scheduled a visit and am waiting to get in to remedy the situation. Mine is a 2016 Ram Limited, with just under 69,000 miles.
Paul Bohnert a defective temp sensor can fool the computer to think like there is a restriction in the exhaust system, you should take care of that code and see what happens afterwars!!
I had this same situation where we had multiple regens within a couple weeks. Then after that, went 6 months before the next regen. Theessage displayed says nearing full, even though we've done lots of highway driving. I'm thinking of pulling those sensors I'm the exhaust and clean or replace at every oil change.
@@chrisc5574hey what happened did it stop mine just came in check engine
What kind of scanner can I buy so I can do this to my truck
𝚞𝚁𝚊𝚟𝚒𝚃𝚢𝙶𝚒𝚁𝚕 Get an Autel scanner!
My engine light says - Exhaust system service Required See Dealer... I ran through the obd scanner and found out the code, it was P24A4. Do you think I should regen the truck?
@tenzinnamdhak Yes!
Thanks.. it worked perfecto....
Hey brother, my truck has exactly the same problems, only I had the accelerator pedal problem first, and then the exhaust particles. Where are you?
Javiet Peralta I'm located in Dickerson MD!
@@KITS_Auto_and_Truck_Repair Bro, I already searched, but I get several addresses. what state is it??
It's in Maryland??
@@Javiet86 yes I'm Dickerson Maryland!
appreciate given the code that way i kow since ,my code is p242f , i cannot get that code to clear in order to do a regen.😥
George Grieninger does your scanner have access to the chrysler Gateway?
Where can I get that scan tool? What’s it called and how much?
Wesley Stapleton it's called Snapon Zeus, you can call snapon and get all the details about it from them
I can't find the option to look at dpf filter levels, must connect to a computer?
OTR Alex vlogs when the soot level starts to go over 50% there will be a message on the dash about it!! you should take it to a repair shop so they can check it out, a good scan tool can tell you the soot amount in the DPF
Is this works for 2022 Ram 3500 6.7 Cummins engine?
@dmaexpressinc3630 it should work!
DPFs Are costly 😵 Lmm in Colorado 🤠
Ronald Babbitt Yes they are!! Lol!!
If after the region process, and driving for about 20+ miles with the check light OFF, the engine check light then comes back on later, what might the issue then? The check light won't stay off for more than about 2-25 miles.
@mic982 you should have it diagnosed by a pro mechanic!
@@KITS_Auto_and_Truck_Repair Well, there-in is the rub: I've had this truck to three different shops, two of them dealerships. None of them have figured out the problem yet. $1100 so far and counting... This was such a good truck, until this happened.
@@mic982 I'm sorry to hear that!
@@mic982I’m having the same problem how did you fix it yet ):
@@qalv97 Sadly, I haven't, yet. I'm awaiting an appointment at the Chrysler-Dodge garage now to get the truck fixed, again. I don't think there are enough real mechanics left in this world who can diagnose and fix actual problems with these newer, highly-computerized vehicles we're driving. I love my truck, but I'm seriously considering trading it off, but for what?
Where do you send the exhaust to get clean ?
Edgar Martinez you mean the DPF? there is a company in baltimore that cleans them for us!!
What scanner were using
@Gilmore304 I used my Snapon Zeus scanner in this video!
Why hasn't the exhaust regeneration process started on its own ? Mine usually does and I'll have to drive down the interstate for about 15 minutes to complete the process... but I just received the 90% full message after taking a 1200 mile trip...
Bernard Graf did you do a lot of city driving while you were on your trip? or you might have a defective component in the aftertreatment system!
@@KITS_Auto_and_Truck_Repair not a lot of city driving, but will run a scan tool check for any stored codes. Thanks for replying 🤙
@@bernardgraf7187 My Pleasure!
What computer is that?
Where did you buy it?
Dominican Rey I used the snapon zeus scanner in this video, I got it from my local Snapon rep!
Can a 2020 2500 6.7 Cummins be put in manual regen like this 1500???
James Orr yes it can be done!! with the appropriate scanner!
I have a 2020 ram 2500 with 24000 miles that has started staying in Regen about 1/2 the time I drive it with 95% highway driving, last reading was 115 miles out of regen and 169 miles in regen before it fell out of regen!! Its still under Warranty>>Now 3 trips to the dealer and told that's Normal!! Any thoughts ?? Thanks.
@@jamesorr2832 good question. Dealer always tells me reset and looks fine 🤨
A dealership replaced my DPF filter and the sensor and I still have the code P2002 even after driving 7 hr at Highway speeds. Truck has not lost power nor boost its running fine. How do I fix this?
Zachary Binx the wiring or Pcm would be checked!
@@KITS_Auto_and_Truck_Repair another dealership flashed and updated the pcm before the dealership I bought the truck from replaced the dpf
@@zacharybinx5859 if the PCM has the latest software the problem might be in the wiring!
Pls what type of scan tool do I need to do this
@user-ky4ri1sd7m You need any scan tool that's compatible to do the regen on this truck!
My dealership has tried the regen and said it didn’t work. Supply chain issues put me 2 months out on parts. Dpf filter $2100 + temp sensor and labor $3,700.00.
I don’t care about the money. All totalled 3 months without my brand new vehicle! What options do I have? Elimination kit= a fraction of the price. Disconnect the battery and Regen myself again? C-4?
140k miles the warranty is long gone.
Afterthehunt007 I recommend waiting for parts and fixing it right!
@@KITS_Auto_and_Truck_Repair Fix it right! I’m reading you loud and clear. *wink*
@@Afterthehunt007 sounds good!
I am not sure but does that engine have a M.A.F. sensor?
Richard 1 yes it does have one
How long does it take normally
@theacademy1734 About half hour!
So I drive highways along and it won't regen. I took it to dealer and they forced regen. But my Guage came up 1/4 og the way and then went away. So I drive it enough. But I noticed it was parked when regen. Do I need to let it run idle so the Guage will move up?
Luis Ramirez I didn't understand your question sorry, was it doing regeneration at idle?
All this trouble because of an agency called epa , if I run a pipe with a muffler and a proper tune no smoke I wonder what would happen 🤔
@kevincarter5854 Lol!!
Do you need to see dealer or can you just go to diesel mechanic?
DdDten any Diesel mechanic with the right tool can do this!
How much cost to fix this like you did?
@raulmiranda3325 send me an email at kitsautoandtruckrepair@gmail.com and I will let you know how much this service costs!
Today when I was going home the truck started itself the regeneration thank you 🙏🏾
What’s the cost to get this fix ?
Janet Garcia email me at Deo@calleva.org and I'll give you a quote for this job!
Do you know why my truck would throw p203e code??
Zachary Smith is a Ram like this one?
@@KITS_Auto_and_Truck_Repair yeah a 2015 ecodiesel
@@zacharysmith1787 this code sets when there is a problem in the level sensor circuit of the DEF Fluid system, so I recommend taking it to a pro mechanic who can diagnose it correctly and fix it!!
Yes the level sensor, i cleaned the tank with distilled water and 2 rinses with boiling hot water. Thats 4 months ago, so far so good😅
Have you ever had to run multiple regeneration cycles to fix this issue?
The Spiritual Momma No! just once helps
How do you go into regen mode without the 10k Zeus scan tool
cgreen339 erase the codes and take it on a test drive on a highway and hopefully it works, it may still not work, so try it out and see what happens!
Will give it a try!