This guy is a proffesor 😂😂 He talks step by step and answers your question without him knowing. You would even realized you finished the whole video listening to him talking 👍
I am a primary school teacher in the mornings (28 years of activity, I have 2 more to go). I also studied electronics and it is a satisfaction for me to be a "student" of young Graham on this channel. All the best.
Today I leant DDR3L is low power, I thought the L stood for laptop. 😳 I really like how you acknowledge your subscribers and Discord members who contribute to your knowledge. They certainly know stuff that I didn’t know I didn’t know. I've complimented your approach and how addictive this channel is a couple of times, but you also have amazing subscribers. In the comments there’s a wealth of information and very little ego. They are people who seem to genuinely want to share information.
Low voltage, yes. Compatibility between slots/board and the memory cards can be either direction, both ways, or neither, but without knowing ahead of time, just uses what's spec'd.
Your skill and your talent are indeed impressive. But your abilities to teach and communicate are truly phenomenal. A rare privilege to find such instruction this side of a pay wall.
There is nothing in the world but 2 things, which makes a man change his rigid face for a smile: one is when working in a dead laptop and suddenly shows BIOS screen; and the other one is from the watchmaker when mounts the watch and the scapement wheel begins to move regularly. Both are ways to "put in life again" a machine. That's your face in today's video!. It is always a pleasure to see something like this. Congrats, Graham!.
Congratulations on your efforts - you and Louis Rossman are real technicians - not some fake fool like Carey Hozerman who is essentially a card swapper who could never operate at the level of competence you show! Bravo!
Great video! I've been a server/storage/network guy forever, but recently got "backup desktop support" added to my duties. While I shouldn't need to get this deep into repair, knowledge this definitely will come in handy. You are very skilled! Very well explained, and I enjoy your dry sense of humor! 😂 Thank you!
Exactly! I'm used to finding a bad fuse or resistor or chip and just replacing. Never thought the BIOS would go bad (corrupted) and cause the laptop to not start! I usually just check things with a multimeter, and go from there. 🤷♂️🤷♂️🤦🤦
You always leave me freaking out with each of your videos, you are the only one who is able to teach me something useful, and also things that I did not expect at all.
Ultimate tutorial about flashing BIOS file and editing it with the old ones, which is precious. You just shared it with us free of charge. Hats off. Now have a little deep understanding of the importance of BIOS.
Yea, in this case it didn't matter. Likely that liquid damage is really old. But too often I've wasted time on testing RAM modules when I'd have gone right to mobo repair if I knew there was liquid damage to find.
That was very instructive. The BIOS modding part was interesting, I loved it ! I used to flash BIOS via a ch341 (old version, the new 1.7 version is on his way, thanks to your previous video), I already known the procedure to get the windows product key (it's pretty standard, address 006CD00 in any single bios bin file via an hex editor) but I didn't paid attention to MAC address or s/n. That's a new path for me to explore.
This is one of the best episodes yet on restoring the BIOS and retaining the original parameters from the corrupt BIOS. I hope you can show us more on where the Ethernet MAC address can be found and transferred to the new BIOS once you have mastered the UFEI Tool.
A tip I have when doing BIOS "rework" is to leave the original chip as is and always have some new, blank chips on hand and mess with THOSE instead. That way, you're sure it's not the chip itself that's faulty by having some bad blocks or other sh!t like that - highly unlikely, but still. As long as there's that 0.01% chance that there IS something wrong with it, you've covered that possibility too. EDIT: I think the KBC in this case is the ENE chip itself. You can tell if you see the traces from the keyboard connector going to it and I know I also read somewhere that it IS possible through some freak adapters and procedures to actually flash this ENE through the goddamn keyboard flex connector :)))
BIOS works are one of my favorite works, have also often shown in videos. I am often asked to make a video about BIOS repair, but it is not feasible to make such a video that could generally show how to repair BIOS firmware. It is only practical examples that can be shared and with new generations come new problems and knowledge. There are also differences between Intel and AMD (AMD has eg. no Intel ME) With experience it gets easier and easier, you understand the logic behind it, but handing over the whole thing would be extremely difficult. Practice makes the master :)
@SiE-Tech Notebook Reparatur, I think I will drop an email to you tomorrow. I would like to get my ASUS laptop repaired. It has the same issue after a failed windows update that also brought with it a bios update. That bricked my laptop in a single day.
Brilliant vid. I have built my own PC`s and I guess like most of your viewers I have a nerdish interest in how they actually work albeit at at superficial level. I too will never do any of this stuff but I find it interesting and you have a very watchable style.
I always flux for removal too, yes. Not as much usually. It does help a bit with initial heat transfer, but at melting temps it doesn't. But it does allow better contact from iron to solder for primary heat transfer, which makes a huge difference.
ME Region is within the main bios and it only on Intel platforms logic board/cpu. The 2nd bios is EC or Recovery. Some business edition laptop such as Fugitsu has 2 bios ic, main (8mb) and ec (1mb). Some boards EC bios is within ENE, ITE controller, which requires programming via keyboard connector. As always a great video 👍. Take care 🙂.
been watching your vids for last few months as recently found you with have a few system with dead bios not really messed with them yet but im finding all your video interesting and informative and also that it not always the end with any system or laptop if bios is corrupted/dead thank man keep up the good work
Dear sir,i thouraghally enjoyed this video, I really liked,your genuine warmf to the audience,your cracking sence of humor,.the genuine sence of angst and then releif,and also your genuines about agnoleging other peoples knowledge.superb work sir,please keep up the superb vids,thanku steve from the uk.
Wow my head hurts but in a good way and I have learnt allot. Thanks for an other great video. I use flux for both soldering and de-soldering just because that's just the way I have always done it. Keep up the great work
One thing you should also point out is security. A random bios file from the internet could very well contain malicious code or some kind of rootkit. It's not very likely but you never know.
Definitely a possibility. Tho it's hard to imagine that being a productive use of someone's time. Especially someone with that degree of technical skill and knowledge. Still can't be ruled out. Ur right it should at least be mentioned.
it's possible. Is it a likely occurrence or even a likely vector? no. The technical skill to build an effective rootkit that can live in 4MB or even 6MB that can interface in the way it needs to without disturbing/breaking the original functionality is a tough ask, not impossible, but nor easy. Also you have to consider that there isn't a whole lot of incentive to use something that specifically targeting and sophisticated on public forums. People making bios level hacks are doing to to target a government issued model for international espionage, not to steal grammy's recipes.
Excellent video, Graham. One minor quibble at 43:43, when you blurred out the Windows license key, but you did not blur out the Hex values of that key. Not a problem, though, since I am sure it is just a generic license key anyway.
This is well above my knowledge base 🤯🤯🤯 but is amazing to watch and interesting to pick up some understanding just some of the behind the scenes mastery of the often abused pc
46:33 Git uses a very clever algorithm to help you to identify a not working commit called „bisect“. You could apply them here too. You divide the modules in an upper and lower half. Change the lower half with the new modules. Does it work? Issue was in the lower half. Does it not work? Issue is in the upper half. And then you repeat that cycle.
YOU ARE BRILLIANT MATE. Thank you for sharing, I have not doubt you have helped a lot of people, including myself. A lot of good karma coming your way for your services to the people. Thank you!!!!!
Theres a clip type adapter to program the bios chip, you can attach it directly to the bios chip without removing it from the board and flash, saves lot of time and effort.
There is, and I have one of those, but it's horribly unreliable, and I have given up after 20 attempts of fiddling with the clip and just desoldered it, and it works first time
Flux helps a lot for removal of components in general since there is little to no flux left after the cleaning process. Flux will ensure the metals stay fluid and also prevent instant oxidation that causes the dissimilar metals to separate and potentially burn that causes dull finishes.
Graphic Card.. add heat to loosen, then replace it.. I have heard doing so helps.. Please do not give up! This is one of the reasons, I watch you work.. You got this Graham.
Yeah, this is a hard one to teach because as you said there is so much variation between devices, I had to do a similar thing with my asus motherboard and had to extract the serial, mac address etc from my dump and bring together the Intel ME, Gbe and capsule file to produce a custom bios using both UEFItool and FD44editor to achieve it. I think the thing to drive home is that there is an excellent community of help out there, we have the discord servers, badcaps forums to name but a few and of course google. Really enjoyed this, this is going in my pc repair playlist to refer to later.
I use flux for removing chips. it really doesn't help with the heat transfer, but it leaves the solder clean on both sides rather than globby, which is helpful for later
SuperIO actually specifically (at least nowdays) refers to a chip providing serial and parallel IO. I know in past times they generally handled more or the chip that does handle parallel and serial handled other stuff on older boards. Never realized this until my new motherboard which is a pro board and has a specific superio chip specifically for parallel and serial IO. Which is fkn nice to have on a modern pc for sure.
The 'KBC' file is for the superIO chip (the ene chip) its actually a full microcontroller with its own flash on board based on an 8051, you can program it with a standard ch341a by soldering a few wires to the keyboard connector it is the keyboard layout but is also the complete firmware that controls all the ancillaries such as the power button, LEDs and fans.
I found this pretty fascinating, and for sure not something I'd want to tackle myself. I don't mind flashing a bios on a desktop PC, but good lord the process for that laptop is crazy. For the time you have invested the repair probably wasn't cheap, but I'm sure the owner is satisfied with the results. You did an amazing job on it.
This video was incredibly useful. I had a Lenovo Yoga S1 (LA-341P Rev 1.O mb) which only started fan briefly and blinked keyboard background LED. I'd removed BIOS chips and read them and compared to ones I had downloaded. Based on your comments it looked like the downloaded ones hadn't been initialized. Decided to reprogram using a CH-341A programmer. Used Neoprogrammer software since AsProgrammer version wouldn't program reliably. So programmed and soldered the two BIOS chips U8, U2202 and bingo started up . Had wondered about the KB9012 Super IO being bad but was the BIOS. Also everything seem fine so maybe other info like serial number etc is stored somewhere else on this machine. It is from 2013. Thanks!
I think that was pretty spot on guide of transferring data from old bios to new. Of checking serial numbers, how about checking stickers on motherboard and comparing these for BIOS' information screen?
The RTC Reset work if you power cycle the laptop after soldering a bridge, that reset is more in deep than disconnect the bios battery, that clean also any bios password (sorry for my bad English)
those BIOS chip actually using i2c interface (sda, scl). you can read write without desoldering using arduino or raspberry pi (connect cable to sda scl gnd pins). if the chip doesn't get stand by power just inject bios vcc pin with bench psu, some board need grounding master oscillator to prevent other component from running but keep stand by power.
Fantastic video Graham! Doing more and more of these repairs and this is a new thing I've learnt from you. To be honest you really extended my knowledge over the last year and made me invest quite a lot in cool gadgets and things to repair Laptops and other electronics. I really want you to know that I think I'm not the only one that learnt a lot from you and your relaxed way of telling / explaining these things. Thank you for that!
Never worked on a Samsung laptop of this age but this reminds me so much of older cheap HP models. Hate working on them too, all laptops should be two piece construction.
Have you looked into using an "alternative BIOS" like coreboot? I don't know this laptop is supported by coreboot, but it would be neat to see a video about that. I have a ThinkPad T430 that I flashed with coreboot. You can use me_cleaner to sort of remove the Intel ME, or you need to dump your original BIOS and inject the ME region into the coreboot ROM.
In HXD you can use the menu Extras->File Tools->Split to split files easily. Can also combine or concatenate them into one file. Much easier than the command line.
This guy is a proffesor 😂😂
He talks step by step and answers your question without him knowing.
You would even realized you finished the whole video listening to him talking 👍
I am a primary school teacher in the mornings (28 years of activity, I have 2 more to go). I also studied electronics and it is a satisfaction for me to be a "student" of young Graham on this channel. All the best.
Today I leant DDR3L is low power, I thought the L stood for laptop. 😳
I really like how you acknowledge your subscribers and Discord members who contribute to your knowledge. They certainly know stuff that I didn’t know I didn’t know. I've complimented your approach and how addictive this channel is a couple of times, but you also have amazing subscribers. In the comments there’s a wealth of information and very little ego. They are people who seem to genuinely want to share information.
Low voltage, yes. Compatibility between slots/board and the memory cards can be either direction, both ways, or neither, but without knowing ahead of time, just uses what's spec'd.
Your skill and your talent are indeed impressive. But your abilities to teach and communicate are truly phenomenal. A rare privilege to find such instruction this side of a pay wall.
There is nothing in the world but 2 things, which makes a man change his rigid face for a smile: one is when working in a dead laptop and suddenly shows BIOS screen; and the other one is from the watchmaker when mounts the watch and the scapement wheel begins to move regularly. Both are ways to "put in life again" a machine. That's your face in today's video!. It is always a pleasure to see something like this. Congrats, Graham!.
Congratulations on your efforts - you and Louis Rossman are real technicians - not some fake fool like Carey Hozerman who is essentially a card swapper who could never operate at the level of competence you show! Bravo!
Hozerman is way too obnoxious and condescending, thinks he's "all-that"!
I really like that when you don't know something your not afraid to say so. A lot of youtubers try to act like they know everything.
Great video! I've been a server/storage/network guy forever, but recently got "backup desktop support" added to my duties. While I shouldn't need to get this deep into repair, knowledge this definitely will come in handy. You are very skilled! Very well explained, and I enjoy your dry sense of humor! 😂 Thank you!
Cheers, if nothing else, I think there's a lot of value in people just knowing that these methods exist.
i`m in a similar roll but i just hate trashing motherboards over what might be a 1.40 in parts and a little know how.
And I thought I knew about computer building and repairing. I know s***t! This is just a next level. You sir have "passed the game".
Exactly!
I'm used to finding a bad fuse or resistor or chip and just replacing. Never thought the BIOS would go bad (corrupted) and cause the laptop to not start! I usually just check things with a multimeter, and go from there. 🤷♂️🤷♂️🤦🤦
Amazing stuff - well above my head but great to watch how you work
You always leave me freaking out with each of your videos, you are the only one who is able to teach me something useful, and also things that I did not expect at all.
Ultimate tutorial about flashing BIOS file and editing it with the old ones, which is precious. You just shared it with us free of charge. Hats off. Now have a little deep understanding of the importance of BIOS.
Always learning something going down these rabbit holes. It helps when the user tells the truth about liquid and accidental damage
Yea, in this case it didn't matter. Likely that liquid damage is really old. But too often I've wasted time on testing RAM modules when I'd have gone right to mobo repair if I knew there was liquid damage to find.
That was very instructive. The BIOS modding part was interesting, I loved it ! I used to flash BIOS via a ch341 (old version, the new 1.7 version is on his way, thanks to your previous video), I already known the procedure to get the windows product key (it's pretty standard, address 006CD00 in any single bios bin file via an hex editor) but I didn't paid attention to MAC address or s/n. That's a new path for me to explore.
🎈🎈YES YES YES, IT'S ALIVE🎈🎈
I HAD FAITH IN YOU GRAHAM.
This is one of the best episodes yet on restoring the BIOS and retaining the original parameters from the corrupt BIOS. I hope you can show us more on where the Ethernet MAC address can be found and transferred to the new BIOS once you have mastered the UFEI Tool.
A tip I have when doing BIOS "rework" is to leave the original chip as is and always have some new, blank chips on hand and mess with THOSE instead. That way, you're sure it's not the chip itself that's faulty by having some bad blocks or other sh!t like that - highly unlikely, but still. As long as there's that 0.01% chance that there IS something wrong with it, you've covered that possibility too.
EDIT: I think the KBC in this case is the ENE chip itself. You can tell if you see the traces from the keyboard connector going to it and I know I also read somewhere that it IS possible through some freak adapters and procedures to actually flash this ENE through the goddamn keyboard flex connector :)))
There is still a lot of questions I have, things I may have missed or forgotten. So I like the way you do this
BIOS works are one of my favorite works, have also often shown in videos. I am often asked to make a video about BIOS repair, but it is not feasible to make such a video that could generally show how to repair BIOS firmware. It is only practical examples that can be shared and with new generations come new problems and knowledge. There are also differences between Intel and AMD (AMD has eg. no Intel ME) With experience it gets easier and easier, you understand the logic behind it, but handing over the whole thing would be extremely difficult. Practice makes the master :)
@SiE-Tech Notebook Reparatur, I think I will drop an email to you tomorrow. I would like to get my ASUS laptop repaired. It has the same issue after a failed windows update that also brought with it a bios update. That bricked my laptop in a single day.
Agreed. It seems that if one new how to write a BIOS and could decode the "program" in the BIOS, one might be able to discover all those things.
Great video!
I am learning so much.
That was good stuff. I know this data is stored in the PC BIOS but now know a lot more about its location.
very well deep effort for making this video thanks graham
Brilliant vid. I have built my own PC`s and I guess like most of your viewers I have a nerdish interest in how they actually work albeit at at superficial level. I too will never do any of this stuff but I find it interesting and you have a very watchable style.
I always flux for removal too, yes. Not as much usually. It does help a bit with initial heat transfer, but at melting temps it doesn't. But it does allow better contact from iron to solder for primary heat transfer, which makes a huge difference.
Hi Adam, great video, very informative and learnt a lot. Thanks
ME Region is within the main bios and it only on Intel platforms logic board/cpu. The 2nd bios is EC or Recovery. Some business edition laptop such as Fugitsu has 2 bios ic, main (8mb) and ec (1mb). Some boards EC bios is within ENE, ITE controller, which requires programming via keyboard connector. As always a great video 👍. Take care 🙂.
How on earth do you store so much knowledge, skill and experience in your head?
wow dude.
I just had to leave a comment. you are doing a great job mahn. teaching everyone here. appreciate it a lot
Excellent video, I like the direction you are going in your repairs. Thank You...
Excellent video just learned something new! Keep up the good work.
been watching your vids for last few months as recently found you with have a few system with dead bios not really messed with them yet but im finding all your video interesting and informative and also that it not always the end with any system or laptop if bios is corrupted/dead thank man keep up the good work
Hello Graham, great seeing you over on PLD's stream
Dear sir,i thouraghally enjoyed this video,
I really liked,your genuine warmf to the audience,your cracking sence of humor,.the genuine sence of angst and then releif,and also your genuines about agnoleging other peoples knowledge.superb work sir,please keep up the superb vids,thanku steve from the uk.
Wow my head hurts but in a good way and I have learnt allot. Thanks for an other great video. I use flux for both soldering and de-soldering just because that's just the way I have always done it. Keep up the great work
This one will enter the history man, great job 👍🏻👍🏻💐
32:48 Eureka! You can't beat that feeling. 🥳😁
One thing you should also point out is security. A random bios file from the internet could very well contain malicious code or some kind of rootkit. It's not very likely but you never know.
what malicious activity it can cause??
Definitely a possibility. Tho it's hard to imagine that being a productive use of someone's time. Especially someone with that degree of technical skill and knowledge. Still can't be ruled out. Ur right it should at least be mentioned.
it's possible. Is it a likely occurrence or even a likely vector? no. The technical skill to build an effective rootkit that can live in 4MB or even 6MB that can interface in the way it needs to without disturbing/breaking the original functionality is a tough ask, not impossible, but nor easy. Also you have to consider that there isn't a whole lot of incentive to use something that specifically targeting and sophisticated on public forums. People making bios level hacks are doing to to target a government issued model for international espionage, not to steal grammy's recipes.
There have been UEFI rootkits discovered in the wild, such as CosmicStrand.
Excellent video, Graham. One minor quibble at 43:43, when you blurred out the Windows license key, but you did not blur out the Hex values of that key. Not a problem, though, since I am sure it is just a generic license key anyway.
yes! you could just twist the endianess out of that hex ag aquore the key, but as you said its not of a big deal
This is well above my knowledge base 🤯🤯🤯 but is amazing to watch and interesting to pick up some understanding just some of the behind the scenes mastery of the often abused pc
Thank you for showing the proper way to keep the BIOS special configuration things!
46:33 Git uses a very clever algorithm to help you to identify a not working commit called „bisect“. You could apply them here too. You divide the modules in an upper and lower half. Change the lower half with the new modules. Does it work? Issue was in the lower half. Does it not work? Issue is in the upper half. And then you repeat that cycle.
Top content as usual,good job!
Thanks for that ! All best from Croatia.
Great job, this is a nice high level overview of BIOS manipulation. Gives us all a starting point if we ever need to do something like this.
YOU ARE BRILLIANT MATE. Thank you for sharing, I have not doubt you have helped a lot of people, including myself. A lot of good karma coming your way for your services to the people. Thank you!!!!!
Absolutely!
But sometimes EC firmware mismatch may play a bad joke, till you sync it with the BIOS version.
Very interesting. I didn't know a fair amount of this. And I'm really smart! Cheers.
Theres a clip type adapter to program the bios chip, you can attach it directly to the bios chip without removing it from the board and flash, saves lot of time and effort.
There is, and I have one of those, but it's horribly unreliable, and I have given up after 20 attempts of fiddling with the clip and just desoldered it, and it works first time
besides the troubleshoot and repair, the way you teach codes and what everything else does as well is very helpful!
Flux helps a lot for removal of components in general since there is little to no flux left after the cleaning process. Flux will ensure the metals stay fluid and also prevent instant oxidation that causes the dissimilar metals to separate and potentially burn that causes dull finishes.
Nice one
Adamant IT.
Good information, Adam! Thank you!
Graphic Card.. add heat to loosen, then replace it.. I have heard doing so helps.. Please do not give up!
This is one of the reasons, I watch you work.. You got this Graham.
Excellent video,,you added alot on bios cases ...Great Job
Congratulations! Handled masterfully.😊
Yeah, this is a hard one to teach because as you said there is so much variation between devices, I had to do a similar thing with my asus motherboard and had to extract the serial, mac address etc from my dump and bring together the Intel ME, Gbe and capsule file to produce a custom bios using both UEFItool and FD44editor to achieve it.
I think the thing to drive home is that there is an excellent community of help out there, we have the discord servers, badcaps forums to name but a few and of course google.
Really enjoyed this, this is going in my pc repair playlist to refer to later.
When first I read the title, I thought the power supply was outputting 350v. No Post would be no surprise.
Learned more from this video than i did from 3 semesters of a private university :( Thanks Dude!
Love it. The second half.
Awesome video, really enjoyed watching this.
I use flux for removing chips. it really doesn't help with the heat transfer, but it leaves the solder clean on both sides rather than globby, which is helpful for later
In my experience it definitely helps with heat transfer. Depends on the flux probably, but the stuff at work speeds desoldering a lot.
SuperIO actually specifically (at least nowdays) refers to a chip providing serial and parallel IO. I know in past times they generally handled more or the chip that does handle parallel and serial handled other stuff on older boards. Never realized this until my new motherboard which is a pro board and has a specific superio chip specifically for parallel and serial IO. Which is fkn nice to have on a modern pc for sure.
The 'KBC' file is for the superIO chip (the ene chip) its actually a full microcontroller with its own flash on board based on an 8051, you can program it with a standard ch341a by soldering a few wires to the keyboard connector it is the keyboard layout but is also the complete firmware that controls all the ancillaries such as the power button, LEDs and fans.
I found this pretty fascinating, and for sure not something I'd want to tackle myself. I don't mind flashing a bios on a desktop PC, but good lord the process for that laptop is crazy. For the time you have invested the repair probably wasn't cheap, but I'm sure the owner is satisfied with the results. You did an amazing job on it.
This kind of video is so interesting, i can't stop looking, even if i have work to do :D
This was SO informative! Thank you so much dude!
This video was incredibly useful. I had a Lenovo Yoga S1 (LA-341P Rev 1.O mb) which only started fan briefly and blinked keyboard background LED. I'd removed BIOS chips and read them and compared to ones I had downloaded. Based on your comments it looked like the downloaded ones hadn't been initialized. Decided to reprogram using a CH-341A programmer. Used Neoprogrammer software since AsProgrammer version wouldn't program reliably. So programmed and soldered the two BIOS chips U8, U2202 and bingo started up . Had wondered about the KB9012 Super IO being bad but was the BIOS. Also everything seem fine so maybe other info like serial number etc is stored somewhere else on this machine. It is from 2013. Thanks!
great video Graham
Great video, good job. I have learnt a lot myself. Waiting for more videos with bios files and ME region stuff.
Love it, great information and entertaining too thanks
I think that was pretty spot on guide of transferring data from old bios to new.
Of checking serial numbers, how about checking stickers on motherboard and comparing these for BIOS' information screen?
he said at the end the UEFI Setup doesn't display any Serial Number Information
The RTC Reset work if you power cycle the laptop after soldering a bridge, that reset is more in deep than disconnect the bios battery, that clean also any bios password (sorry for my bad English)
those BIOS chip actually using i2c interface (sda, scl). you can read write without desoldering using arduino or raspberry pi (connect cable to sda scl gnd pins). if the chip doesn't get stand by power just inject bios vcc pin with bench psu, some board need grounding master oscillator to prevent other component from running but keep stand by power.
good job...Congrats...and thanks for this fully detailed walkthrough!...again...Respect!
After watching your videos, I purchased an RT809H with adapters.
Thx so much ! You are really a good coach to understand things that mess up on devices !!!!
Very educational video. Thanks for sharing 🙂
the red arrows just flew over my head. just like the 2nd half of this video went.
WOW! Great video, this is how youtube should be!
Fantastic video Graham!
Doing more and more of these repairs and this is a new thing I've learnt from you.
To be honest you really extended my knowledge over the last year and made me invest quite a lot in cool gadgets and things to repair Laptops and other electronics.
I really want you to know that I think I'm not the only one that learnt a lot from you and your relaxed way of telling / explaining these things.
Thank you for that!
Flux lowers the melting point of solder, so it is always a good idea to use it.
Never worked on a Samsung laptop of this age but this reminds me so much of older cheap HP models. Hate working on them too, all laptops should be two piece construction.
Very cool. Superb teaching skills.
Can't wait for the next installment in the Basic Bitch franchise. What will be called a basic bitch next? Tune in to find out.
Fab work Graham 👍🏽👍🏽👍🏽
excellent video, well explained. thx for sharing
Have you looked into using an "alternative BIOS" like coreboot? I don't know this laptop is supported by coreboot, but it would be neat to see a video about that. I have a ThinkPad T430 that I flashed with coreboot. You can use me_cleaner to sort of remove the Intel ME, or you need to dump your original BIOS and inject the ME region into the coreboot ROM.
Very useful information. Thanks
Dropping quality info. Thanks.
nice work, very nice explanation
I'm amazed how there are so many corrupted BIOSes
In HXD you can use the menu Extras->File Tools->Split to split files easily. Can also combine or concatenate them into one file. Much easier than the command line.
Best explanation!
Code level stuff is mind blowing stuff.
Followed you for sometime now
And 3 days ago I had no backlight in my Samsung laptop up until today , I short circut the resets and backlight restored
I'd love to show this video to someone in the early 19th century.
Will be nice i need to learn this also to transfer the bios codes. A video will helps me allot. Great video!
Great video! incredibly informative!
Another pro tip: get familiar with Total Commander! It has the split/combine file functionality you're looking for.
I'll check it out - would certainly take out some of the leg work!
This, Total Commander, with it#s plugins is incredibly powerful.
Excelentemente explicado y entendido, muchas gracias!!!
Very informative video. Great work.