DPF Reset and FIX the warning light on Mazda with Diesel Engine
ฝัง
- เผยแพร่เมื่อ 26 ต.ค. 2024
- Mazda Flashing DPF Light Fix and reset Tutorial.
Why the DPF warning light goes on after oil change on my Mazda?
The DPF warning Light will blink every 20.000km as a reminder to change the engine oil. So it has to be reseted after every oil change.
How to clear DPF warning light at home and save?
It is very easy DIY procedure. No tools needed just a 1.5m long cable.
After an Oil change you have to reset the DPF/Service Indicator.
This particular model is MAZDA 5, 2009, 2.0 DIESEL, 103Kw/140PS but you could reset oil change light on all MAZDA Diesel 2005-2014.
In these models the DPF Light functions also as a Service Light (reminder to change the engine oil).
This worked perfectly! Temporarily triggered a glow plug warning light, but once wire was removed following the reset the flashing DPF light was gone. Got to go get an oil change ASAP now. Thanks so much!
Hi there, thanks for your comment. You might have some other faults recorded in the computer memory. I would check it.
Glad I could help.
Why change the oil after this?
@@AndreasLangvatn-ALMedia unrelated - I just needed to do an oil change lol
Complimenti, è la soluzione !!!!in poco più di 2 minuti ed il gioco è fatto,DPF ok! grazieeee
Sono felice di poterti aiutare.
It works! Thank you so much from Hungary!
Glad I could help!
Thank you very much five minutes work is finish🎉🎉🎉🎉🎉
Great job!
Faleminderit shumë funksionoj (thankyou very much) Dankeschön
Thanks! Worked. My service forgot to reset DPF after oil change several times, then they reseted it afterwards and I believe they did it in some similar way or with diagnostics, I don't know. It's quite stupid that is has to be hacked this way and also stupid from Mazda that it uses DPF control light only to mark that it should be reseted after the oil change. it scares me everytime it shows when somebody forgets to reset it after regular oil change.
I still have a question - what this hack actually does? Is it programming the control unit via NULL signals sent by gas pedal to specific pin or reset of the control unit or something else?
I agree. First time I was scared too, it looked like a problem for a several hundreds of euro.
And unfortunately I don't know what it does exactly so I can not answer your question.
Is that would work for dpf light that stays on constantly? (Not flashing)
Thanks I will try and let you know if it really works.
For me it works every 20000km...
This is very good, how to do the same on a CX3 Skyactiv 2018 , cabling is different, can't find the same. Merci d'avance
It's the green cable we are connecting to? Right?
Merci beaucoup c'est impeccable 😉👍👍
Merci beaucoup c'est impeccable
Sehr gut 👍 alles prima.
Vielen Dank. Ich freue mich sehr wenn meine Videos geholfen haben.
Bei meinem CX-7 2.2 haut es irgendwie nicht hin😢
What year is your car? Different Mazda have different way to reset the DPF warning light.... Mine does not seem to have this front connection that you are using but has right side box with fuses and connections.
Mine Mazda 5 is 2009 (11.2008), facelift, 143PS. If this helps.
Fantastic thanks 😀👍
Glad you appreciate it. Thank you.
El mio es un mazda5 2007. Cuando lo arranco se quedan encendidos los testigos de derrape, bolsa de aire, freno mano, motor y el dpf parpadea. Sera la falla igual a esta???
No, esto puede ser algo serio. Aquí muestro cómo restablecer la luz DPF después del cambio de aceite del motor.
Hi can you offer any advice on how to get to the service socket located near the radiator. Do I have to remove the plastic housing above the radiator/ engine release mechanism?
I think it is not necessarily. The socket is visible right above the radiator.
Muchas gracias campeón
Me alegro que mi video te haya sido útil.
hola compre un cx3 y también comenzó encender esa luz dpf después del cambio de aceite,,, osea no debería preocuparme mucho
Thanks for the information/video. I have a 2015 Mazda 6 2.2 SkyActive Diesel with this problem. The Fuse Box looks different on this model to this video. Which fuse component should I be putting wire into on these models? Anybody have any ideas? Or does anybody know the name of the component that is being plugged into in this video? I can then find that name in the layout plan of my cars fuse box. Thanks.
Hiya have you found out how to solve issue
@@stevethomas2478 No still struggling. Car's going to have to into garage now I think. I can't resolve it, and car is past limp mode now. Barely runs.
@@tolakindoyin6412 yea I've decided too take to garage and get map etc on it u know the rest . Gutted
Better go to a garage, I just know how it works on this model.
I've got a 2007 Mazda 3 diesel engine same problem but my wires are different colours no green wire
Strange, I was thinking - same engine, same wiring.
Hoya where can I find that plug on a 2009/10 mazda please
It is between the radiator and the engine.
Hiya would this work on 2010 mazda 3 2.2 sport
I am not sure if the wiring is identical. Please do not risk otherwise you might damage your vehicle.
Does this work on a 2017 Mazda CX3? Thanks.
I can not be sure if this works on a newer models of cars since their computers have much more problems to solve and probably they could have totally different reset instructions. Sorry.
Enter the maintenance menu on your vehicles computer. From there you could easily reset the oil change reminder light.
1:13 помогите как быть, если на разъём приходит только два провода и нет зеленого провода ?
К сожалению не могу подсзать, я не механик.
what gauge of wire did you use or does it matter?
It was a wire I had in the garage. I think it was 1 or 1.5 mm2, I think both types will do the job. Preferable a single wire inside.
where is this part located, there is no such part in my car
Do you have a diesel?
Which part do you mean?
@@smartech108 that black part that is like a stick, that connects the negative cable,
@@ouiwiththepoodles yes disel , mazda 5 ,2010
Bonjour, ma Mazda 5 diesel de 2010 n'a pas de connecteur au dessus du radiateur, avez vous un autre emplacement ?
Désolé, je n'ai aucune idée de l'endroit où se trouve votre connecteur. Votre Mazda est-elle équipée du même moteur DIESEL 2.0 ?
@@smartech108 Bonjour, oui c'est un 2.0 L cd19
@@lepileurbertrand2133 hast du den Stecker gefunden.
Ich habe es auch nicht.
Ich habe einen Mazda 5, 2,0 cd, 110 PS, Baujahr 2010
@@peronedev8121 Bonjour, non je n'ai pas trouvé le connecteur. Désolé.
@@lepileurbertrand2133 Da ist ein grauer Stecker...hinter dem linken Scheinwerfer...
Also vor dem Sicherungskasten...
Ich werde morgen daran arbeiten ... um zu sehen, ob es ein grünes Kabel gibt ...
Yo lo e hecho al Mazda 5 exactamente igual y no me solucionó
Entonces no parpadea debido al cambio de aceite, pero es posible que tenga un problema con el filtro DP.
Jus for the record, this tutorial isn't applicable for all Mazdas 2005-2014. I have a 2013 Mazda 6 2.2 diesel and the set up for connectors etc is completely different.
Thank you for the information. It might be because your engine is 2.2...
@@smartech108 Hmm, I don't think it's that, maybe it's just different with the Mazda 6. For example the dashboard is completely different to whichever one is shown in your video.
Because 2.2 skyactiv-d MK3 it's from 2012 but last 2.2d in MK2 is 2012. and have completely different everything.
THAT what is showing on this wideo is up to 2012 not 2014
🙏👏👏👏👍😃🤜🤛 10 !
When you will lose your entire engine, then that is good issue... :) Good luck.. BTW, this man will likes for his video, not for your goodness.. :) MAZDA 2.0 MZR-CD problem with gas in oil... Check this.
Yes, that is the way the DPFilter is cleaned - with diesel. I'm not familiar how exactly the system works. In this video I show how to reset the REMINDER after changing the engine oil. It will light up EVERY 20.000km.
Doesn't work on my one. Tried 3 times
So your DPF-Light is on not because of the mileage for oil change but for some other reason. Probably you should connect it to a computer to see the error message. Usually this is done in almost any garage or service point. The DPF-Light on Mazda Diesel Engine could light up if you drive all the time in the city. Another solution is to drive for about 30 minutes on a highway with more than 2200RPM. This burns the deposits from your Filter and cleans it.
It will regenerate the DPF, DPF must be regenerated to the end of the regeneration. When you make this, the PDF will be loss and you damage the engine. Good Luck
Thank you for your comment. Please read carefully the description to understand what is this video about.
So you didn't actually fix the dpf issue you just killed the warning. What the fuck?
I definitely solved the DPF-Light reminder issue.
Please read the description.
This is very good video for kill your mazda.. :)
Why do you think so?
hi, what about Cx-3 ,Where can we find its service cable point
I have no idea where is the service cable point on MAZDA CX-3. In my video I show how to reset the oil change reminder - DPF-Light in this particular model. As far as I know on Mazda CX3 you could do it by entering the maintenance menu on your vehicle computer.