Just wanted to say THANK YOU for the great video series. If it hadn't been for your wonderful videos I would not have taken this project on. I am not much of amodeler, but I just completed my build and, like I said, your videos were the motivation! I mounted the transmission vertically in mine and utilized the lid off a can of sardines for a skidplate...lol. Also, I utilized a Sabertooth 2x12 RC. The hardest part of the build, for me, was getting the darn drive sprockets set up correctly and you're right about the need for the modification on the sprocket teeth...skips without doing "something". THANKS AGAIN!!! The only thing i cannot figure out is how to make the steering work correctly in reverse (it's backwards in reverse). If there's a mix in the transmitter or something I should be doing, I have not yet figured that out. No big deal, once a person gets used to it.
I took mine out the box and started to take measurements. I am going to build a full metal version and hopefully it will be 200lbs so I can really play with it.
@@juddphillips I'm using my Bruder for scaling only and will build a bigger scale. I'm using 1/4" plate, wheelchair motors, 8 inch sprockets, .75" axle shaft, etc....I'm tearing apart a build I had started 3 years ago. I started uploading on TH-cam before I canceled it out. The frame with tracks is heavy already. Tracks were about 170 dollars
That's cool! But what happens when you break link in the track? For a toy for the equipment needed for that is about 100 bucks or little more. pretty sweet!
that's cool! I made mine with 3 car servos one ESC and it works so nice! the only problem i have is traction it cant push mush dirt because its not very heavy
Hi , friend I am a big fan of his work , and make sure you inspire many people to modify their bruder models. Could you list the items you used this model in particular ? Sorry for the English had to use google. Congratulations and good luck always
I'm really glad that you, of all people, finally did a step-by-step conversion. This is the only one that I know of on youtube. But 1 question: Would this project work with a regular radio, or would I have to have something similar to the radio that you run? How is the excavator project going? is it going to work right with the actuators?
Could I use a Bruder D9T Bulldozer? I looked on amazon all they had was a 12 amp dual motor driver? where did you get yours? I sure appreciate your site and help with these retrofits, that's really cool man... Frank
thanks for this cool video. Can you write down all the part list in details. i want to make sure i got all the parts and i will try to do the same mod for my son toy
Jacob Hendrickson yeah there pricey but if you went with 2 esc it wouldn't work the same and would cost more and take up alot more of the limited space to work with.
+JRP RC Judd Phillips thanks man can i use an airplane transmitter and receiver or it wont work? I order the tractor and some parts to get started thanks for the vids they are really helpful
Just wanted to say THANK YOU for the great video series. If it hadn't been for your wonderful videos I would not have taken this project on. I am not much of amodeler, but I just completed my build and, like I said, your videos were the motivation! I mounted the transmission vertically in mine and utilized the lid off a can of sardines for a skidplate...lol. Also, I utilized a Sabertooth 2x12 RC. The hardest part of the build, for me, was getting the darn drive sprockets set up correctly and you're right about the need for the modification on the sprocket teeth...skips without doing "something". THANKS AGAIN!!! The only thing i cannot figure out is how to make the steering work correctly in reverse (it's backwards in reverse). If there's a mix in the transmitter or something I should be doing, I have not yet figured that out. No big deal, once a person gets used to it.
Awesome build series. think I'm gonna try and build one for my kid for christmas
Got exact one to convert also... Love it✌✌👋✌👋👋🎉🎉🎉🎉🎉
But this is totally cool how you build these things. Looking forward to watching
Cool. Can't wait to follow the build.
Great video! Master builder you are!
I took mine out the box and started to take measurements. I am going to build a full metal version and hopefully it will be 200lbs so I can really play with it.
it couldn't weigh 200 lbs even if it was a solid brick of lead
a block of lead that's 10"x6"x5" is only 129 lbs ;)
@@juddphillips I'm using my Bruder for scaling only and will build a bigger scale. I'm using 1/4" plate, wheelchair motors, 8 inch sprockets, .75" axle shaft, etc....I'm tearing apart a build I had started 3 years ago. I started uploading on TH-cam before I canceled it out. The frame with tracks is heavy already. Tracks were about 170 dollars
Yeah I'm building one too
you build the coolest stuff
th-cam.com/channels/uuQFNHx6d_02CYyQBG1Wsw.html
oh my god this is so awesome, and i am totally going to do this! thank you. Me and my dad will love doing this together!
That's cool! But what happens when you break link in the track? For a toy for the equipment needed for that is about 100 bucks or little more. pretty sweet!
I'd love to see you do one of the skid steer that was on the box. I think it would be pretty cool and fun to see.
Holy crap, I commented on this 6 years ago?!? I'll have to rewatch the video when I get home! Lol
Awesome man n i just found on ebay cool n i think i want to try with the telehandler but not sure i know i want to start trying though pretty awesome
Me going to have a go many thanks.😀
that's cool! I made mine with 3 car servos one ESC and it works so nice! the only problem i have is traction it cant push mush dirt because its not very heavy
Get a bit of weight in there in the form of, say, a piece of steel.
Yup it does... except that I broke it.lol
Great video!
That was cool thanks for sharing :)
that is going on my To-Do List
Hi , friend I am a big fan of his work , and make sure you inspire many people to modify their bruder models. Could you list the items you used this model in particular ? Sorry for the English had to use google. Congratulations and good luck always
I'm really glad that you, of all people, finally did a step-by-step conversion. This is the only one that I know of on youtube.
But 1 question: Would this project work with a regular radio, or would I have to have something similar to the radio that you run?
How is the excavator project going? is it going to work right with the actuators?
Nice bro
Oh cool! I subscribed to your channel! :)
Could I use a Bruder D9T Bulldozer? I looked on amazon all they had was a 12 amp dual motor driver? where did you get yours? I sure appreciate your site and help with these retrofits, that's really cool man... Frank
Good Day
Just curious how much would one of those RC Bruder bulldozer R2R would cost today
I ordered the gearbox but I’m not sure if it comes with the motors?! If not what motors fit in the Tamia gearbox??? Pls help!!!
thanks for this cool video. Can you write down all the part list in details. i want to make sure i got all the parts and i will try to do the same mod for my son toy
I had another question. Just what is the motor driver used for? Thank you.
Would like to see you do a diecast one.
I saw this one on ebay: New Dual MC33886 Motor Driver Module 5A for Robot Smart car..
Does this also works?
what sort of battery do you use, and how long play time do you get from it
Pretty cool but with the saber tooth module makes it kinda pricey for what it is
Jacob Hendrickson yeah there pricey but if you went with 2 esc it wouldn't work the same and would cost more and take up alot more of the limited space to work with.
Hi! I saw a sabertooth (MC33886) on ebay, will be serving ?? Thanks
Where do you buy your RC stuff from and models and parts ?
thank
I'll try that out
Could you do an old Tonka t9 bulldozer?
can you use any reciever
Will the spectrum ar6310 work?
how do u wire the two drive motors to work off 1 channel?
control*
where do you buy this bulldozer
how much does a motor grader remote control
czekam na następny odcinek Twojego filmu jestem ciekaw jak go dalej będziesz przerabiał .
what transmitter are you using
+Eddie Medina a really old dx4
+JRP RC Judd Phillips thanks man can i use an airplane transmitter and receiver or it wont work? I order the tractor and some parts to get started thanks for the vids they are really helpful
aonde eu compro um
It will last to very robust toys