awsome build bud. I am just getting into the Bruder builds. This weekend I purchased two Bruders. The mack dump and the Scania low loader truck. I plan on trying to convert them to rc for my upgraded huina line of rc's. But I am all in on the bruder line and learning through master mecanics like you :-) subbed and following every video I can.
' my R/C system with 2.4ghz and 5 channels... i put spring lock inside on the joggystick at left hand side same as right hand side... very good and no accident
amazing build. is the a controller that's not so over kill that can be used? and for the "glitching", is there a way to stop that. I plan to build one of these and one of the big dump trucks.
Hi Judd , I have done everything like on your videos. (thanks à lot). I bought this controller to use like you described on your video. My problem is this. When I connect the two motors to the receiver (Futaba or other) my DOZER works perfectly mixing action of the motors (sabertooh configuration: Radio control, differential drive exponential). The problem happens when I connect the servo to the receiver. Engines stop running well and I lose control of the machine (motors), servos continus running well. Thank you tell me the solution to my problem. Regards, Antonio PEREZ SERON
Hello I wanted to know where I can find this unit you are assembling in the video. What is it called and where can I buy ... I'm Italian I would build it myself but I don't know what it's called and where can I buy I hope to hear from you thanks
' i have one R/C model M1 tank with one gearbox = twin motors / one rechargeable battery / two ESCs... very beautifully smooth running very well... better than sabertooth ESC
Wow! I gotta tell you! I watch the entire build process for this bulldozer! And i enjoyed entire process! Great work! Thanks for sharing!✌😎👍
Thank you for the videos , it´s great .
Great work! I'm preparing my own one. Thanks for share!
Great work!
Great job. You got talents
awsome build bud. I am just getting into the Bruder builds. This weekend I purchased two Bruders. The mack dump and the Scania low loader truck. I plan on trying to convert them to rc for my upgraded huina line of rc's. But I am all in on the bruder line and learning through master mecanics like you :-) subbed and following every video I can.
Bardzo fajny poradnik jak przerobić Brudera na rc .
Man its awesome as can be Great job dude
i like it very much thank you
Hey judd, great job! I am doin a conversion to the bruder tracked excavator, same setup your doin. keep up the good work
Great work man.i love it
'
my R/C system with 2.4ghz and 5 channels...
i put spring lock inside on the joggystick at left hand side same as right hand side...
very good and no accident
amazing build. is the a controller that's not so over kill that can be used? and for the "glitching", is there a way to stop that. I plan to build one of these and one of the big dump trucks.
Muito 10 ,Bem feito o comando , parece realista,,,,,,,,,,,,,,,
very very very job........( brazil
the extra peice is the sattlilelie on the transmitter and can be removed
did you figure out why the blade is twitching did you have some kind of mixing on
Hey Great Work!!! Can i take any receiver and transmitter combo weather it be for a helicopter or plane and make it work for a build similar to yours?
it's stronge power full
So the receiver gets its power from the board and doesn't need a separate battery?
Dose the servo do that cas it’s a airplane radio and it has a stabilizer?
Hi Judd , I have done everything like on your videos. (thanks à lot). I bought this controller to use like you described on your video. My problem is this. When I connect the two motors to the receiver (Futaba or other) my DOZER works perfectly mixing action of the motors (sabertooh configuration: Radio control, differential drive exponential). The problem happens when I connect the servo to the receiver. Engines stop running well and I lose control of the machine (motors), servos continus running well.
Thank you tell me the solution to my problem.
Regards,
Antonio PEREZ SERON
friend a question, as it is called the card you used to control two motors, TEN VIDEOS THAT GOOD SUVISTE
Awesome! I would love to learn more. Are there online classes one can take to do this as a hobby. I live outside the US
Try running another receiver for the servo paired with the same radio
Hello, what module electronic use for motor the chain ?? thanks
Hello I wanted to know where I can find this unit you are assembling in the video. What is it called and where can I buy ... I'm Italian I would build it myself but I don't know what it's called and where can I buy I hope to hear from you thanks
did you get the glitching out yet? i would like to know how well it works in dirt please give us an update vid of it in the dirt
it kinda goes away after a few min, its weird! there will be a video of it moving dirt!!
'
i have one R/C model M1 tank with one gearbox = twin motors / one rechargeable battery / two ESCs...
very beautifully smooth running very well...
better than sabertooth ESC
What 2 esc are u using if you don't mind me asking looking for something to run the tamiya gear box thanks
How much about does it cost to make out of these guys !!! ive watched all your dozer builds
total for this one not including the radio was just under $150 and that includes the dozer
Okay cool thank you buddy !!
What kind off motors did you use
the gear boxes come with motors, i just got new ones since i used the ones that came with it for my other dozer
What kind of voltage ?
My gearbox doesn't have wires, what kind of wires are need
Ola. Qual placa é essa. Qual modelo?
you are not used esc?
can you link me up for the green board buddy. I'll do you a shout out.
where do i get the wires
Could you send me a list with all the stuff you used?
Definitely recommend watching Smallhaul videos for proper and clean conversions... :)
Still, ok job....
Hi, rather than electronic board have you looked at hobby king v tail mixer same skid steer result for ten bucks
What is a "BEC"
So did u get the glitching fixed? I want to do this build but not if the glitching is uncontrollable
it kinda goes away after a min, its weird. my other one doesnt do it.
U think it could just be the motor controller? Being just a little bit different
i think the bec is not as powerful in this sabertooth controller as it is in the one that say rc on them
Ok. I'll check into it for you and I'll get back to you
JRP RC Judd Phillips I had this exact glitching issue with an RC car. I swapped the servo for another one and it fixed it!
entha spare yallam yanga kedaikkum
Where can I get the male adapter for the battery theming
Beck Welding search for (dean connector)
when you buy this esc for two motor? thanks
Selvatico81
when you buy this esc for two motor? thanks
'
hi S...
better two ESCs with twin motors
What size battery did you use ?
2000mah 2s lipo
how much that cost for all ?
donde lo puedo comprar
plz sollunga