I'm just getting back into Carping after years out of action! found myself lost with making Rigs that are awful and whatnot! nice to see a top Carper giving free tips! i shall be using this Rig as a go to Rig
Hi Alan, we met at CARPITALY, and you promised me you would comment on one of my videos ... it would be a great honor for me. You are my idol and a greeting from Italy ... Giampy💪🇮🇹
Here, let me give you your 800th like ! Been making these with your instructions all afternoon.. was fun, but now i cant see another rig for the upcoming week !
Only problem i find with using the tubing on the shank is if you have been done, then that rig is now sitting out there ineffective, and most time youd have no idea. Personally i think having a rig that if its been picked up and ejected by a carp (which happens very often), you want it to be presented effectively again for the next carp that picks it up
+Deki R32 I've been using this rig with snowman presentation with very good effects, but I use slightly longer hair in such a case, say 6-10 mm of separation between the hook and the boilie.
The hook lifting up without the point swinging down puts me off of this rig. I get the theory and yes will turn quicker than most rigs. However i like my point to be heavy swinging low for the bottom lip, prefer normal blowback with ring over this
@@JLSGamingYT not even remotely, and before you challenge that. Just 1 mechanical difference is if you lift a D rig up the hook point swings down and is point heavy, this rig will lift sideways or upwards
Whenever I cast out my carp rig, I always reel it in to find that the hook and bait has wrapped round the line above the lead. Even when using anti tangle sleeves this happens.
Learn to stop the rig b4 it hits the water or use a pva bad if it tangles mabe wrong rig mabe component wrong practice is key find a rig that works and role with it
Ive used a similar rig and had good results but casting over 60 yards the tubing moves when the bait hits the water every single time. That telling you've been done is bollocks, if it goes it goes man.
then ur tubing is to loose or you're not feathering the cast well enough iv been fishing this rig for 10+ years and it will only move if a fish picks it up or a crayfish gets hold of it. normally a crayfish in my case
I'm just getting back into Carping after years out of action! found myself lost with making Rigs that are awful and whatnot! nice to see a top Carper giving free tips! i shall be using this Rig as a go to Rig
1:08 don't think he was thinking about that sentence 😂
I met Alan a few years back.
100% genuine bloke
I'm so stoked for carp fishing in Ontario this year. I'm going to have to try this rig.
Brilliant Alan, your a top bloke, I love your videos, they are so easy to follow and so informative. keep up the great work 👍
used this rig to great effection in my fishing and have landed fish to over 30lb so it is not a load of rubbish its a fab rig
Hi Alan, we met at CARPITALY, and you promised me you would comment on one of my videos ... it would be a great honor for me. You are my idol and a greeting from Italy ... Giampy💪🇮🇹
Here, let me give you your 800th like ! Been making these with your instructions all afternoon.. was fun, but now i cant see another rig for the upcoming week !
This guy is a unit !
😂😂😂😂
I made one yesterday worked well 😁
Really clear thanks guys
Only problem i find with using the tubing on the shank is if you have been done, then that rig is now sitting out there ineffective, and most time youd have no idea. Personally i think having a rig that if its been picked up and ejected by a carp (which happens very often), you want it to be presented effectively again for the next carp that picks it up
“Sucked and blow, sucked and blowed till it ejected”
Adam Taylor 😂😂
Very helpful thanks
We don't have these tubes and rig rings in US, have to order them from UK and they take forever to arrive.
I'm the 1000th like :)
Nice video. Btw you look like John Cena :)
Terry heurns rig
It is Alan copied him lol 🎣
@@oliverroberts2492 mate I honestly forgot I comment on this 2 years back😂😂
Very similar to Terry hearns parrot rig
if tube moves on cast put a peace of pva foam nugget on or a small pva bag .don't need a lead shot good rig 🖒
Can you use fluorocarbon instead of the braid?
Lily Greenway you probably could but it would not be as good if you used braid
Lily Greenway you could but it would all fucked up and close the gape of the hook, especially with shrink tube
N
С такой петелькой, волос можно не вымерять.)))
Were do you put the wait
👏👏👏👏👏
Can you do a video on the multi rig?
Just look for Julian Cundiffs version on you tube.
You really will need, no other instruction.
Bloody good watch is Julian.
What lead system should I use for this rig?
NASH TV Carp Fishing cheers guys, love your products
Would shrink tubing work as well as a kicker??
Yeah
Terry hearn flippa rig
Yeh it's his bottom bait rig
I can’t fit the blow out tube on my bait needle any suggestion
New baiting needle
Is this rig good for snowman presentation?
+Deki R32 I've been using this rig with snowman presentation with very good effects, but I use slightly longer hair in such a case, say 6-10 mm of separation between the hook and the boilie.
+Marcin Kaluza Thanks
Terry hearn uses this kinda rig with snowman
Basically a blow back rig ??
The hook lifting up without the point swinging down puts me off of this rig. I get the theory and yes will turn quicker than most rigs. However i like my point to be heavy swinging low for the bottom lip, prefer normal blowback with ring over this
Exactly the mechanics of an Amnesia D Rig 👌🏼
@@JLSGamingYT not even remotely, and before you challenge that. Just 1 mechanical difference is if you lift a D rig up the hook point swings down and is point heavy, this rig will lift sideways or upwards
I don't know why but all the fish I've caught on this rig have been nailed but in the top lip 🤔
Same
🤷♂️
It’s a parrot rig
Totally no control at all where the hook will penetrate with this rig:-(. Ouch 🤕
Technically the parrot rig
Sucked and blown, sucked and blown and then rejected, sounds like my misses
Whenever I cast out my carp rig, I always reel it in to find that the hook and bait has wrapped round the line above the lead. Even when using anti tangle sleeves this happens.
Boss Man use a pva bag every time. Or a stringer.
Or maybe work on your casting technique
Stopping the line before hits a water prevent tangle.
Or use two bits of foam stuck together one either side of your hook this will slow it’s fall and push it away from your mainline/lead
Boss Man learn to cast properly
Learn to stop the rig b4 it hits the water or use a pva bad if it tangles mabe wrong rig mabe component wrong practice is key find a rig that works and role with it
1
Ive used a similar rig and had good results but casting over 60 yards the tubing moves when the bait hits the water every single time.
That telling you've been done is bollocks, if it goes it goes man.
then ur tubing is to loose or you're not feathering the cast well enough iv been fishing this rig for 10+ years and it will only move if a fish picks it up or a crayfish gets hold of it. normally a crayfish in my case
why not just tie the knot further down the shank -_-
Cause the hair goes away from the hook point... this rig brings the boilie close to the hook point and hooks fish better
If its back this much I'm pretty sure it's a tench or a bream 🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣 what a load of BS
Hair rig not a blowback rig
rubbish rig, don't waste your time boys
No, ur just a massive noddy!
Rob Collier best comment 😎