Garage Concrete Floor (How Thick?) (How Much Slope?)
ฝัง
- เผยแพร่เมื่อ 15 ก.ย. 2024
- #EverythingAboutConcrete #GarageFloor #MikeDayConcrete
In this video I'm showing you how to pour a garage floor and talking about how thick to pour a garage floor.
We also sloped this garage floor 2.5" towards the garage door to help shed water that gets dripped onto the floor.
We poured this garage floor 5 inches thick but a lot of the garage floors we pour are only 4" thick. 4" is strong enough for a residential garage floor if the sub-base is properly compacted with good gravel.
If you want more concrete training, If you want to learn how to start and run a concrete business like I do. The join The Concrete Underground below. My training videos are in there as well as I am to help mentor you and answer your questions.
The Concrete Underground Training Academy:
www.theconcret...
MY STAMPED CONCRETE COURSE:
mike-day.mykaj...
MY CONCRETE SLAB COURSE:
mike-day.mykaj...
FOUNDATION CRACK REPAIR COURSE:
mike-day.mykaj...
GARAGE EPOXY FLOOR COATING COURSE:
mike-day.mykaj...
VISIT MY WEBSITE:
www.everything...
USE THE SAME TOOLS I DO:
FLOOR FINISHING POWER TROWELS:
amzn.to/3abyIAf
ScreeDemon Vibratory Screed:
shrsl.com/2ej6o
12' Screed Board for ScreeDemon:
shrsl.com/2ej6u
MARSHALLTOWN SHOCKWAVE VIBRA-SCREED:
amzn.to/2tZ79ti
TOPCON LASER LEVEL:
amzn.to/2VrJ3zV
DEWALT PENCIL VIBRATOR TOOL:
amzn.to/2Km5Zis
INVERTER GENERATOR LIKE WE USE:
amzn.to/2XfWfwe
BULLFLOAT:
amzn.to/2U1Kx2F
HAND FINISHING KNEE BOARDS:
amzn.to/2TZmTUj
MAG FLOAT & STEEL TROWEL SET:
amzn.to/2IgmDOq
2" MARGIN TROWEL:
amzn.to/2G33KNn
CONCRETE PLACER OR KUMALONG:
amzn.to/2I00gxp
CONCRETE FINISHING BROOM:
amzn.to/2UytU2B
CONCRETE SCREED:
amzn.to/2WZxtwm
CONCRETE EDGER:
amzn.to/2GbGkEp
CONCRETE GROOVER:
amzn.to/2PaL414
BOSCH HAMMER DRILL:
amzn.to/31AHnaN
MY RECOMMENDED TOOLS PAGE:
www.everything...
SUBSCRIBE to my email list and get my FREE video guide on how to get the perfect broom finish on a concrete patio:
forms.aweber.c...
Follow me on Twitter:
/ creteexpert
Follow me on Instagram:
www.instagram....
Follow my Facebook Page:
/ everythingaboutconcrete
![Shareปลาวาฬ ส่งท้าย SS1 พาเปียโน ขึ้น Ferrari ก่อนไปขาย แลก Nissan l [Nickynachat]](http://i.ytimg.com/vi/KAknGkTNIvg/mqdefault.jpg)
I like your method of over dubbing after the fact instead of addressing the camera on site. It allows you to be a lot more informative. Excellent tutorial
Love the sound of concrete being poured 👍🏻
Very satisfying Yes.
pro trick: you can watch series at kaldrostream. I've been using it for watching lots of of movies during the lockdown.
@Izaiah Avery yup, have been watching on kaldroStream for months myself :D
Great video s I’m in Rhode Island just an old man in 60 s still learning I’m good with carpentry cement works always on my list of projects extremely educational thank You and crew nice clean work
Thanks
Sometimes I'm jealous seeing u guys pouring in the winter, then I step outside and remember why I sold my ground heater and 2 semi loads of blankets. Just trying to keep the guys busy can get expensive.
Yea, it's hard to get up and get going when the temps are in the teens. The older I get the harder it is.
@@MikeDayConcrete move south!
You guys make it look easy. A true testament to hard work and professionalism. Stay Warm !!!!!
Thanks Mike. I'm amazed concrete can be poured successfully in 15 degree temperatures. I'm not a pro but have poured one 40 x 25 slab. Your videos taught me everything I could have done better, for the next home later this year.
Another great pour! You seriously need to have a hands-on course, I'd be the first to sign up!
2nd. Bro
I might do something like that this summer. Got to get past this pandemic stuff first.
Great job! I love watching your videos. I told my hubby we should get into concrete and he told me no. Oh well I tried. I’ll just keep watching you then.
We did a garage room addition once and the pain in the ass customer assumed i was going to build a 100' road for free since we had to pour footers and a floor.
However, i got my hands on two pieces of 12" pvc schd 80 and ripped them in half, ending up with about 80' of chutes which we simply staked to the ground and watch the mud fly down the hill. Customer was very disappointed that he didnt get a free road!!
Thanks Mike. Great work, good advice. very true and forthcoming about your business. I think it's so good that you do this. You deserve your success. And your helping me find mine. so thanks for everything.
20 years ago, I noticed contractors like you in South east NY started making chutes out of big pvc pipe cut in half. So they had their own custom chutes. But I’ve never seen a conveyor truck around here
Some guys still have those pvc chutes, but most now have the aluminum ones. They are expensive though. I've had some for over 10 years. Worn a hole through the bottoms from so much concrete flowing through them.
Love your videos. I am a masonry contractor. Do some cement not much finish work. Pour a few foundation. Yall do great work. Every in Alabama stop by.
Just look at their foot work, the proper way.. just great stuff men.
Like watching a ballet when they're screeding. They've been working together a long time. A tribute to you as their leader to get and retain a good team. That way, everyone makes good money, the customer gets a quality product.
A lot goes into pouring a concrete garage floor. We can do the prep work, level, gravel, compact and wire. Concrete workers pour, pitch and finish pretty. Note the additives to the Crete.
Mike, next time tool in a 2"x2" keyway in the base slab where the center of the wall is. This will tie in the wall to the slab AND as a bonus prevent water infiltration. Keep the rebar but stagger it just to the edge of the keyway. Some tarring should be applied where backfilled as well.
Another great job Mike i like using the water reducer on my Jobs also.Tony from New Mexico.
Hi Tony, thanks!
Hi Mike, we would of used a wheelbarrow or the carver on truck. Great videos been watching a lot of them . I have a concrete construction company. We do alot of the same work you do in Maine. We are based out of Central New York so we get the same weather. I like you videos because you guys deal with the same stuff. Thanks for the videos and keep it up. It really helps me and my small concrete business. My name is jim and I owner of Haskell concrete construction inc.
Hi Jim, let me know if there's anything I can do to help.
The concrete trucks around here usually have an extra 8 ft chute they carry on the side of the truck so you don't need your own. I am in Idaho. The majority of our concrete trucks dump out the front also. The driver can control everything from the drivers seat. Most drivers are pretty nice around here, some don't listen to your instruction and try to rush you.
Nice one bud
Never seen pouring in cold weather like you do. The problem we have is keeping it cool on 40 celcius day. Mike West Australia
another fantastic video and your explanations are great. super interesting to learn how stuff goes in Maine. thanks always Mike!
I started thinking that you guys finally got better at prepping, but then Mike revealed that the prep was done by another team.
This is a great channel. I love the videos.
Glad you enjoy it!
Nice job Mike!!
Thanks!
Mike. This is tim. I don't know what I would do. 😮
Hello. Great videos. I was wondering how much I should be paying for stamped concrete per square foot? I live in Las Vegas and have 400 sqft to do.
A general price would be between 15 - 20 per sf. Not including sub-base prep.
Great video. Very informative. Well narrated. What do you do with an existing garage floor that's cracked and unlevel? Do you have to remove it?
Another quality slab !! Will you have to cover to protect from the cold weather ??
Yes, they had blankets there.
U guys make it look sooo easy👍👏💪😓
Yall are the best, with Odell. What would you do if you ever run short?? Also how much water reducer to add to a yard? Ty
If we run short we call for another load. It really sucks though. They add around 8 to 10 ounces per yard. Depends on the brand and if you want mid or high range.
We do 3 1/2 inch slope
I’m having a 16’ made this week! We do a lot of patios that maybe 25-30’. We normally just pull it r shoot it some. But that’s getting old!
We use these chutes all the time, I got an 8, 12, 16. Saves a lot of pulling.
@@MikeDayConcrete ever had a problem with the driver not allowing you to put the chute on the truck?
Mike, why did you ignore the wire mesh and rebar elevated by bricks? You or your guys just left them on the ground. Explain to everyone how good that is. You are suppose to be a learning tool here and I don't mean to pick your work apart but that wire mesh and rebar are important to the integrity of that slab. It's so easy to do it Right.
The rebar and fabric looked like it was not embedded in the concrete. Was it?
Hi Mike. Thanks for the great videos. A question for you. How do slope and thickness work together? Is the middle of this pad 5” thick and one end then 6.25” and the other end 3.75”? Or is it minimum of 5” for all (7.5” at one end, 6.25” in middle, and 5” at door)? Thanks.
Cool watching this 👍
I guess what I don't understand is how concrete stays sloped. Why doesn't it level out like water?
Pouring concrete outside in 15 degree weather? Did you cover it with insulated blankets? Concrete freezes and weakens it.... That’s not allowed in Minnesota, I’m shocked that’s allowed there.
In Minnesota winters, Concrete needs to be poured at above 40 degrees and heat left on it for two days while concrete cures.
Nice job
I have been meaning to ask you why do you like the psi mixes so much compare to the bag mixes. Also have you ever used the bag mixes? Thanks Mike
We would absolutely pump it. Lol.
Haha, I hear ya. Keep on Pumpin!
I noticed when you guys bull float you never seem to run the float the whole distance of the bay...always seem to just stop short..just wondering why to help preventing a "Dip"?
some guys here in MN use repurposed brick for chairs ... is it common out there in Maine?
Hey Mike
What kind of tolerance do you hols for your slab flatness. +/- 1/8", dips or low spots?
This has been something that I fight myself with when pouring concrete.
On a residential there nobody holding us to a tolerance but I would say we're about 1/8" in 10'. You can tell when you power trowel. Also when we snap chalk lines on the floor to saw joints, you can see how flat it is.
Nothing in life is greasier than being a concrete worker
How about a concrete owner!! Haha
What type of fiber do you specify?
I've been studying. Getting ready to pour a slab for a cabin.
We do 3 1/2
I am no concrete guy but I would think that they would make a screed with handles to where you would not have to bend over so much instead of a long 2 x 4??
They do have those, we're just old school.
@@MikeDayConcrete Thanks - I enjoy you videos! I am a tennis court resurfacer guy out of Kansas City Mo - Always something to learn!
U must use 4% acceleration to get it to setup
What did you use for accelerator,calcium or calcium chloride and what %? Your crete looks alot nicer than ours here in Montana. One time float and its sealed up with no lines pouring at a 7.
4000 psi with 50lb bag of cal. We used 1.5 bags per truck on this one. 5.5 yds per truck. This company does have a nice creamy mix. Very east to pour and finish.
@@MikeDayConcrete its hard for me to make the comparison because calcium is liquid here and instead if adding bags we go by percentage. For instance I poured a 2400 sqft slab the other day and added 2.5%. We pour with 4000 psi in most all slabs unless engineered for more. Thanks for the reply I appreciate it.
Do you always use high range or do you use mid range as well? Is there a workability difference?
Mostly mid, there's no difference in finishing or workability.
My builder says 6" thick is code, could that be true?
whats the coldest exterior stamped job you have done?
Always great work. By any chance can u make video without narrataring. Just hear all you on job. Would be cool. Hear you ur team ,truck driver,ect. Thanks.
Noted
Ok ... so in videos by others I never saw them come in with a laser level and shoot the depth of the concrete so I can see how in the middle you determine how thick the concrete has to be. On the sides I assume you strung a chalk line at the level required to get the requested slope and thickness.
So .... the guy with the laser level does not seem to be there in the middle religiously, lack of better word here, verifying that the inside, middle screeder, is keeping the correct height and slope. So ... ok I know that experience accounts for alot of unseen skill in doing stuff.
once the floor is set ... do you go back and shoot spots to verify that you hit tgts? I know it's not like you can just tear it out and do it again. But, and I'm thinking in the middle of the floor, how do you verify for the customer that he paid for x and y and got x and y in the end?
Also ... I realize you didn't put in the wire mesh rebar. But it looked like throughout the video that there were bricks sitting on top of the mesh and thus the mesh was sitting on the stryrofoam. I was under the belief that the mesh and rebar should live somewhere near the center of the mass of concrete.
Is it possible to do concrete this thick in squares?
Hi Mike ,what do you do when you turn up short? I poured machine foundations in when they removed machinery and we threw in all kinds of old compressor parts in to make it level.
I call for another load. If it's less than a wheel barrow then we'll try to fill with stone and mix with the concrete but it might only happen once a year for us.
Hi Mike ,I would hate to try to excavate some of those fill ins we did at the Worthington Compressors in Holyoke,MA.Its a Amazon distribution center now.
that wire mesh looks a little low to be helping
Do you have a video on how to form a very steep yard?
you may need a retaining wall to level it out depending on purpose of concrete.
@@Tom-yb6sl it's for a 12x20 she'd. So no video on something like that?
The smartest thing I saw was the laser was put away even before you finished pouring. Not cheap to replace a good quality laser.
Where can I get a chute like that
Which bag of pre mix concrete do you recommend for smooth finishing work? I can never get the basic quickrete 60lb to be smooth since there's so much aggregate it seems like.
Quikcrete 5000, mix relatively dry and you’ll get pretty close to what you would get with ready-mix. The cheaper bag mix they tend to skimp on the amount of cement mixed with the aggregate. Hope this helps.
@@danno55328 yeah I had a feeling I should go with the 5000 pro finish. Thank you
Yes, the 5000 is closest. You can even add a quart of cement to it when you mix for better workability.
One more float handle
I know, my fingers were too cold to go get the other one. haha
American made Mike.
Yes!
I thought and was told when I was an apprentice that the slope for concrete couldn’t exceed 2.4% is that true ? I don’t do too much concrete I’m a farmer but I’ve done some form work in the past but I’m no expert when it comes to concrete but I like learning about all aspects of construction
Ment to say framer not farmer I mainly do wood framing I’ve only been in construction for about 5 years so thers still a lot I’m learning and need to learn I’ve been wanting to learn more about concrete maybe you can answer my ?
On a garage floor there's no code as to how much slope where I'm from. We do what's reasonable so it'll shed water.
Im from California I’ve formed a few side walks and one time we had to tear out a few because our slope exceeded a 2.4% just wanted to know if this applies to most pours thanks for the info appreciate it
Got it nice n wet for the boys with those additives in there. Your a nice fella Mikey. Least you got the stuff to speed it up i hate winter jobs just sitting there all day
We don't like sitting there either. Hot water, accelerator, water reducer speeds things up a bit.
Hi Mike! I have a question. I live in MA and I’m planning on tearing up my severely cracked 20 x 15 garage floor and repouring it. What is the benefit to adding the styrofoam? I assume it’s for expansion in the cold weather?
The styrofoam helps keep the frost from getting under the slab and lifting it. Works really good. Still need to have a good gravel base, no expansive soils like clay under there.
11 1/2 Those trucks hold more. And we get full trucks 12 1/2 no problem
In 40 years you never learned how to install rebar. Even when someone left all of the blocks laid out for you, you just left the rebar lying on the ground where it does not contribute to strength and you didn't even pull up the mesh. There is 40 years experience and then there is one year experience 40 times. Glad it's not my garage.
It is not alot of fun doing concrete when it is that cold.
I got my battery heated jacket on, that really helps.
@@MikeDayConcrete How much does a jacket like that cost and where do you buy them
Your boys are kayaking with the straightedge, they're not cutting all the way to the walls
Hell yeah
Yeah!
Again the mesh should be elevated 2inches so mesh is not sitting at the bottom, which is useless. 40 years???? 😢
make more vids. put up 4 a week
Your concrete dosnt look like it has very much rock are concrete here in Illinois has one inch rock or hair bigger in it it dosnt seem to work as easy as yours does
Ours is 3/4 and some smaller. We can ask for a 50/50 blend with 3/8 if we want it that way. No 1" rock in our mix.
Nice to see White People doing the work. LOL I'm in Los Angeles. It's JoseA, JoseB & JoseC. "Lets Go Brandon"
No way u power troweled it by 330 and saw cut it must off had 20% acceleration in it
We did, the styrofoam keeps it warm underneath and really speeds up the set time.
@kevinharris9909 Hi Mike, this is really the best video ive seen here on the subject. Thank you for your clarity.