@oniseb yes its working but if you want to use it dont pair it with the mobapad m6 hd/s instead pair it as joycon. And you will have budget lenovo legion go👍
Yesterday I received the Mobapads M6 HD and I can say that they are the joycons that Nintendo should have created since the beginning of the console. They are really comfortable, it is a pleasure to press the dpad, the HD vibration really is like the original joy cons. The analogues are very smooth without a dead zone. The iOS app is in English and can create multiple configuration profiles for each game, including one for TOK and Monster Hunter. The L and R buttons have a small gap when pressed compared to the previous M6. However, in the previous ones, having so much sensitivity sometimes put pressure on them involuntarily. Additionally, I bought Lenovo thinkplus GM2 Pro headphones and in gaming mode there are no sound lags, recommended for those interested.
I got mine after the first video on these, had em about a week now, and I LOVE THEM. By far the best joy con I've ever used, I am only disappointed I just got them at the end of the Switch lifecycle LOL
Thank you for answering our questions! I purchased the Mobapad HDs and absolutely love them. Here's another tip. To clear the back paddles' default L/R shoulder button assignments: Hold down a macro button until it lights up, then tap the corresponding paddle. Do this for both sides. Done! No more stray L & R presses (unless you want to program them again). I saw you do this in your QRD Stellar T3 review and was pleased to see it work with these controllers as well :)
Thank you, there are some great answers here! I still have two more: 1. Where can you get replacement joystick heads? Like you said, you can always change them, but I haven't seen any way to get more... 2. I have random LinYuvo joycons with mechanical buttons where you can hear the click BEFORE the button is actuated. It happens when you press the button too lightly. I hope this kind of misinput does not happen with these? I feel that the button should always actuate with or before the click, not after.
I have the same question. There are no stick replacements anywhere on their official site/shop as far as I can tell. Also interested in hearing an answer to your second question as that would bug me too!
@@piotr78 Unfortunately, it seems you cannot get replacement heads anywhere. I tried searching for hours. The only way I can see is to contact Mobapad directly, but I didn't try that one. I decided to use stick caps to protect my Mobapads. And yeah, since I purchased these after my initial comment, I can also verify that the actuation comes at the same time or before the click, so there are no misinputs. Mobapads are great, the only negative for me is that the magnetic shell is not perfectly aligned with the base.
Seriously the M6 HD joycons are so nice. I have larger hands and have tried a few different joycon replacements. These are hands down so comfortable and feel so premium when playing in handheld. Thanks for the videos and reviews of these!
Hey Andy! I bought this after watching your videos. These really are incredible as you said. Pro tip though. If you want to keep it looking clean. I bought skull and co thumbcaps for the pro controller and they fit the mobapad m6 hd just fine and match it’s white color. Cheers! 🎉
Just bought the M6 HDs as a present to myself after getting my yearly bonus check! Have the NIXY Hyperion Pros but they slide off my Switch way too easily and i am constantly have to resync them while I am playing which is so annoying. Your video showing how they are to slide on and off the rails of the Switch sold me on them! Thanks for the video!
I loved these so much I bought a 2nd pair for my soon incoming modchipped Splatoon 3 Switch OLED. And I ordered M6 S just to have colored faceplates and yellow d-pads to swap with.
My HDs are out for delivery :D I'm still rocking the original M6s from a few years ago, and I still like them quite a bit. The new ones seem like a pretty obvious upgrade.
mobapad m6 hd appears to lose battery charge when the Nintendo Switch is set to sleep mode and then put in the official dock. Guess its not charging when the switch is in sleep mode and docked.
They both use mechanical switches as far as I know, the S just uses an unknown brand whereas the HD use Omron. Either way you're getting clicky. If you want non-clicky I would say go with either the Nitro Deck or the Nyxi Hyperion Pro
This will depend massively on where you live. I live in the UK and placed my order for M6 HD and case on 28th Jan and just received them today 2nd Feb. This was ordered through the Mobapad store.
I would swoop the boards so the blue and purple are hd
หลายเดือนก่อน
14:32 problem with the LB/RB buttons making an annoying noise due to the spring? do what I just did, I just coated it with a TINY bit of vaseline, and voila, noice is gone. (key switch lube would probably work even better but I didn't have any on hand.)
Thank you so much for telling me about modifying the original switch grip. The nyxi charger seems a bit small for my preferences and i can't justify spending $20 for cost+shipping of the iines bridge.
Exactly - I've been looking for that info on google, reddit, Aliexpress and on the official website. You can remove the stick and that's it. Where are the replacement sticks?
A very good and detailed review! Please tell me the length of the entire console with the attached mobapads? I have a Hori Adventure Pack bag and I can't figure out if it will fit or not. Thanks!
I've purchased the Mobapad HD controller because of your review and ever since, I will never go back to any other controller. The mouse style click is a game changer for me. I have a nyxi controller/nori (best buy) and they don't compare at all. I still want to try the hyperion pro for the color and center piece but the HD is superior! I might get a second controller 🤙🏾. Cheers
As someone who used to have the Hyperion Pro and returned them and now owns the M6. Don’t bother with the Hyperion lol there’s no comparison. Hyperion is like a cheap dollar store knockoff
Mobapad M6 HD / Joycons wired connection on a Windows 11 PC: In case anyone is interested, I will write down my personal failed experiments/attempts to connect the M6 HD and joycons to a Windows PC via a USB wired connection (without Bluetooth). If anyone knows what am I missing to get the wired connection working , please share it. Please bear in mind that I have not installed any joy-con driver nor attempted to use software mapping. I could follow up on a different message. Shot-out to @ActionJaxonH as his video encouraged me to try it out with the nintendo charging grip. As a mid bridge, I am experimenting with two products: a) NYXI Rechargeable Mid Bridge. (showcased in this video at 2:20) b) Official Nintendo Joy-Con charging grip (Note: you need to disassemble the mount holder for it to fit with the M6 HD) Experiments: Mobapad M6 HD: A) Using NYXI Rechargeable Mid Bridge: Does not work. Windows does not recognize the M6 via USB connection B) Using the Joy-Con charging grip: Windows recognizes both (left/right) mobapads as “Joy-Con charging grip”, however, it does not detect any button press. The lights on the charging grip oscillate up and down in red. Nintendo Switch Joycons: A) Using NYXI Rechargeable Mid Bridge: Does not work. Windows does not recognize the joycons via USB connection B) Using the Joy-Con charging grip: Windows recognizes both (left/right) joycons as “Joy-Con charging grip”. However, Windows thinks all the buttons are constantly being pressed and released. Moving the right thumbstick sometimes triggers a reaction on the “point of view hat”. The lights on the charging grip are solid green. Once again, if anyone knows how to get a direct wire connection between the M6HD or joycons and a windows pc., please share it with the community. All the best
I had mine for about a month before they started drifting ever so slightly. No big deal, increased the dead zone. But then it started drifting up and to the left. Like hard. Spinning my character in place. Jiggle the joystick and it goes back to normal. It’s now 3 months later and I get about 85% movement from up down left and right. My diagonals show full movement, but moving my stick directly up, down, left, or right all the way, shows only about 85%. Pretty good for joycons. But definitely room for improvement.
I thought as "hall effect" joysticks there wasnt supposed to be any drift? Was there any way to fix them or is it still an issue? This is the only time ive heard of these having the issue and now im debating on them 😅
Dumb question but what is the main difference between the two besides rumble and omron switches. Also, how much different are the switches anything noticeable?
Please I need to know how they are if you play them as separate joycons, I want to use them for Splatoon. The regular Joycons suck, but these look like they would fit comfortable using them separately with Gyro controls. But I have seen nobody make a video about it. Would these be good for splatoon with Gyro?
Where can we get the app for the Mobapads M6. I love mine and honestly will be returning my CRKD. You were and are 100% correct about your review for these amazing controllers for the switch. You all need to click his link, get yourself a pair and enjoy it. The HD Rumble is amazing and the comfort is what Nintendo should of made originally.
@@louisdellalucca8969 They might be but Amazon isn't :). I bought it through there so this way I could try it for 30 days and then return it if need be. I like it but the rumble and thumb stick on the right side are just huge turn offs for me. So I am going to return it and then just make sure that I order the case for the moba m6. Totally worth and so much better then CRKD.
One thing I haven't seen mentioned is there any discernible difference in the quality and level of noise the mechanical buttons on the M6S make compared to the HD? I know the switches are different, but is one more loud/clicky than the other?
I disassembled official joycon charge grip down to middle slab and use that as a Pro Controller grip. But if you're charging from an outlet while using other joycon in handheld it'll constantly disconnect because charging ones keep trying to connect. Just FYI
M6 HD using NYXI grip, How does it feel in hand? Does it feel tight? Is the control better gripped using the normal size of the joycon grip? Thanks for your responses
I love these joycons. They replaced my nitrodeck 😂 i hope they will be compatible with the next switch or i hope they make something for the switch 2 early in its life cycle
Im looking for a set of joycons with a dpad for fighting games for handheld gaming. Its extremely important that im able to 'roll' on the dpad. Rolling is going from one input to another in one motion. Something original joycons cant do because the buttons are separate and too far apart. People that play fighters will understand what i mean. Can you roll on these dpads? Can you pull a hadouken for example? Also can you use nyxi stick replacements? PS4 compatible?
@Jrstrdr I have some now and can confirm that although it is possible to input moves using the dpad, it certainly isn't ideal and couldn't be used other than casually. Each input on the dpad is still a click and doesn't roll. The dpad is made well enough though that a hadouken will register, just not everytime. Ultimately, where there's no denying that these are the best joycons on the market, you're still better off using a separate controller altogether for fighting games.
People who have these joy-cons on the Switch OLED, a question: Do they fit well in the console's rails, or do they feel "wobbly"? I bought a LinYuvo and had to return it because the fit was loose, unlike the original joy-cons that fit like a single piece. Thanks a lot!
Not sure if this is me just being stupid but received mine today and can't seem to assign face buttons on the right controller to the back button on the left controller. Tried the app and it only lets you remap one controller at a time rather than both as a pair. Update: Figured it out. In order to do this you have to use the app and set the back button as a macro. For example to set B to the left rear button you have to create a macro of press B 100ms release B.
Hello Again Good Video Again you Need To Have 1M Subs For all your Hard Work Of Your Videos Your The Best Reviewer Of The Nintendo Switch Joycons And Other Accessories Of The Nintendo Switch Keep Up The Good Work😁😊
Hey so i loved my m6HD's, updated the firmware to the latest 1.48 via the iOS app and now they are bricks. No device recognizes them. Does anyone know how to fix this?
From what I have read the app allows for cross macro/remapping of the buttons. I don't have mine yet so I can not test it. What thumb sticks fit or do you have to buy more mobapad sticks?
I tried in the app to see if I could map something from the right joycon to the left back button but no go so as far as I can tell it's just left button to the left controller and rights to the right.
Got my Mobapad M6 HDs two days ago. Great except for one problem-the ALPS Linear motors (for vibration) come on at random and oftentimes won’t shut off until I shut off the console (it may just be the right controller but seemed like both a couple times). I’m emailing Mobapad back and forth trying to explain what’s going on and not having much luck at the moment. Hopefully, I’ll get it resolved. I’ll update this when I have some sort of resolution to the problem.
Did you download the app and update the firmware? My rumble would randomly do 1x vibrate and now and then when the switch was off, after updating the firmware it stopped! Keep us updated and good luck!
Yeah. I have the iOS app (v1.3.1) and it’s says my controllers are using the current version of the firmware (v1.14) and that no firmware update is available. Unless the iOS app doesn’t work properly and can’t fetch new firmware.
@@caetanodantas4880thanks for reminding me about this. After a couple months of back and forth emails and many reminders from me saying that I needed my controllers replaced, they finally did send me a new pair. I think, ultimately, I just bugged them so much that they finally sent me a new pair to stop the barrage of emails. I will say it was quite difficult to finally get a new pair. Not the best customer service at all. But yeah, I’m good now. Resolved.
How’s the stick tension? I prefer firmer sticks compared to loose or sloppy ones. I’m really interested in these for smash bros. Have you had any experience with input delay compared to the standard joycons?
Ever so slightly looser than the official Pro Controller. The shoulder buttons are a huge disappointment though, especially the awkward sharp ended flat shaped L2 & R2 triggers, while L1 & R1 are on the mushy side. The controller is extremely annoying too since it sounds like a symphony of mouse clicks, especially when a game makes use of the D-pad. I couldn't stand it. How hard is it just replicate the official Pro controller, slice it in half and make it work in handheld mode? The Moba 6 HD's just don't cut the mustard in my eyes. In most ways they're a step up from the Joy-con's, but intrusive mouse clicks firing at all cylinders, crummy shoulder buttons and even the slightly mushy B,A,X,Y buttons are all a step down for me. Joy-cons have lousy shoulder buttons too mind you ;)
We now know what the Switch 2 Joycons are going to look like. If Nintendo doesn't hit the mark on the next the Joycons like Mobapad M6 HD, I will be dissapointed
Thank you for your video. Does anyone know if there is a charging center piece (or Joy-Con charging grip) that can also transfer data? I have the MobadPad HD, and I would like to connect it to my PC via a USB cable. (I am aware that I can connect them via Bluetooth, but I'm curious if there is any Joy-Con to USB wired adapter available.)
@@128KB Thanks for your quick reply. Does the Nyxi centre piece allows you to use the joycons in a pc via usb ? (Imagine I do not have Bluetooth on my computer)
@Kirkyboi07 still don't have an answer and not about to order but doubt it. Binbok/doyoky make a slim version thoigh that (again can't confirm) but appears to. About the wirh of the hori split compact
FINALLY SOMEONE JUAT LIKE ME. 😂😂 I do that exact same thing I have to wash my hands before I touch my controllers every single time. Because I hate when it get that sticky feeling and stuff. I actually been doing that for YEEEEEARRRRRSSSS over 20 years since the sega dreamcast days I been doing that and I'm 37 years old now. One of my biggest pet peeves is someone touching my controller before they wash there hands I always tell people I know I'm anal but u have to wash your hands before u touch my controller some even tell me then forget it they don't want to play and that's JUST FINE WITH ME lol.
Hey Andy! Thank you so much for your reviews here. They are insightful and so much fun to watch. I've got just a couple questions if I may. 1. Do you have any stick covers for the Steam Deck? I'm curious if they would work with the MOBAPAD. 2. Would you happen to have a horizontal comparison of the Hyperion Pro vs. the MOBAPAD M6 HD? I'm curious how far they extend to the left and right of the Switch. Thank you!
If anyone wondering. The sticks are almost the exact width of the steam deck. So steam deck stick caps work perfect on these 😁👍
Thanks for that!
Well that's wicked to know!
width you mean the diameter of the caps right?
That's nice to know. Which ones would you recommend?
@oniseb yes its working but if you want to use it dont pair it with the mobapad m6 hd/s instead pair it as joycon. And you will have budget lenovo legion go👍
Yesterday I received the Mobapads M6 HD and I can say that they are the joycons that Nintendo should have created since the beginning of the console. They are really comfortable, it is a pleasure to press the dpad, the HD vibration really is like the original joy cons. The analogues are very smooth without a dead zone. The iOS app is in English and can create multiple configuration profiles for each game, including one for TOK and Monster Hunter.
The L and R buttons have a small gap when pressed compared to the previous M6. However, in the previous ones, having so much sensitivity sometimes put pressure on them involuntarily.
Additionally, I bought Lenovo thinkplus GM2 Pro headphones and in gaming mode there are no sound lags, recommended for those interested.
How long did it take to arrive?
was shipping fast?
@@babsmo5748 10 days aprox
Pro tip on fitting in dock with USB. Buy right angle USB-A adapters that corner them to the backside and you wont have that issue anymore.
I got mine after the first video on these, had em about a week now, and I LOVE THEM. By far the best joy con I've ever used, I am only disappointed I just got them at the end of the Switch lifecycle LOL
You mind be able to use them with switch2
Thank you for answering our questions! I purchased the Mobapad HDs and absolutely love them.
Here's another tip. To clear the back paddles' default L/R shoulder button assignments: Hold down a macro button until it lights up, then tap the corresponding paddle. Do this for both sides. Done! No more stray L & R presses (unless you want to program them again). I saw you do this in your QRD Stellar T3 review and was pleased to see it work with these controllers as well :)
Thank you, there are some great answers here! I still have two more:
1. Where can you get replacement joystick heads? Like you said, you can always change them, but I haven't seen any way to get more...
2. I have random LinYuvo joycons with mechanical buttons where you can hear the click BEFORE the button is actuated. It happens when you press the button too lightly. I hope this kind of misinput does not happen with these? I feel that the button should always actuate with or before the click, not after.
I have the same question. There are no stick replacements anywhere on their official site/shop as far as I can tell.
Also interested in hearing an answer to your second question as that would bug me too!
@@piotr78 Unfortunately, it seems you cannot get replacement heads anywhere. I tried searching for hours. The only way I can see is to contact Mobapad directly, but I didn't try that one. I decided to use stick caps to protect my Mobapads. And yeah, since I purchased these after my initial comment, I can also verify that the actuation comes at the same time or before the click, so there are no misinputs. Mobapads are great, the only negative for me is that the magnetic shell is not perfectly aligned with the base.
Seriously the M6 HD joycons are so nice. I have larger hands and have tried a few different joycon replacements. These are hands down so comfortable and feel so premium when playing in handheld. Thanks for the videos and reviews of these!
Hey Andy! I bought this after watching your videos. These really are incredible as you said. Pro tip though. If you want to keep it looking clean. I bought skull and co thumbcaps for the pro controller and they fit the mobapad m6 hd just fine and match it’s white color. Cheers! 🎉
Just bought the M6 HDs as a present to myself after getting my yearly bonus check! Have the NIXY Hyperion Pros but they slide off my Switch way too easily and i am constantly have to resync them while I am playing which is so annoying. Your video showing how they are to slide on and off the rails of the Switch sold me on them! Thanks for the video!
replace the sticks with what? you can buy spare sticks?
I loved these so much I bought a 2nd pair for my soon incoming modchipped Splatoon 3 Switch OLED. And I ordered M6 S just to have colored faceplates and yellow d-pads to swap with.
And now they have faceplates only for a much cheaper price then the whole lot
No wiggle will probably fuck up the rails for any other joycon which, eventually, will not just make wiggle worse, but make connection wonky
you shall never put any other joycon on your switch, did you get the message?
Yeah I did wonder about that after you leave these on for a prolonged time. (Which seems likely if they're really that good!)
I got regular switch grips and shaved the bottoms down so they can actually grab the thing and it's been perfect for me so far
Been using them non-stop for 2+ weeks, handheld mode is now SO good!
Disappointed it took 7 years for such a controller to come out..
Still plenty of life in a switch even with a newer console out
@@tobiasjansen9117100%. A console doesn't just disappear from my home when a new one comes out!
Why does no one ever ask if you can invert the stick axis in the app?
Do you know when these will be on Amazon? Mobapad's only product that they currently sell on Amazon is their ChiTu controller.
My HDs are out for delivery :D I'm still rocking the original M6s from a few years ago, and I still like them quite a bit. The new ones seem like a pretty obvious upgrade.
The jump in price is justified or no?
About thumb stick grip. Steam deck or ally size is perfect for me 16:00
Can you make a video of what cases will fit the mobapad m6 HD? I’m trying to find one that will.
Where could one get thumbstick replacements without buying a whole other set? If looking for other colors for example
mobapad m6 hd appears to lose battery charge when the Nintendo Switch is set to sleep mode and then put in the official dock. Guess its not charging when the switch is in sleep mode and docked.
Bought the M6 S off the back of your review and completely love them 🎮
Hello, please, where can I find replacable sticks, or how to find it ? does they have some specific name or dimension to be compatible ?
What mobapad s or HD has less sound abxy clicks?
They both use mechanical switches as far as I know, the S just uses an unknown brand whereas the HD use Omron. Either way you're getting clicky. If you want non-clicky I would say go with either the Nitro Deck or the Nyxi Hyperion Pro
One more question! 😅 how long does it take after you place your order to get these?????
This will depend massively on where you live. I live in the UK and placed my order for M6 HD and case on 28th Jan and just received them today 2nd Feb. This was ordered through the Mobapad store.
I would swoop the boards so the blue and purple are hd
14:32 problem with the LB/RB buttons making an annoying noise due to the spring? do what I just did, I just coated it with a TINY bit of vaseline, and voila, noice is gone. (key switch lube would probably work even better but I didn't have any on hand.)
Thank you so much for telling me about modifying the original switch grip. The nyxi charger seems a bit small for my preferences and i can't justify spending $20 for cost+shipping of the iines bridge.
Like a few others have asked, where can you get replacement thumbsticks? Thank you!
Exactly - I've been looking for that info on google, reddit, Aliexpress and on the official website. You can remove the stick and that's it. Where are the replacement sticks?
@@Diabl0pl also why no reply from this channel?
A very good and detailed review! Please tell me the length of the entire console with the attached mobapads? I have a Hori Adventure Pack bag and I can't figure out if it will fit or not. Thanks!
I've purchased the Mobapad HD controller because of your review and ever since, I will never go back to any other controller. The mouse style click is a game changer for me. I have a nyxi controller/nori (best buy) and they don't compare at all. I still want to try the hyperion pro for the color and center piece but the HD is superior! I might get a second controller 🤙🏾. Cheers
As someone who used to have the Hyperion Pro and returned them and now owns the M6. Don’t bother with the Hyperion lol there’s no comparison. Hyperion is like a cheap dollar store knockoff
@user-lz4rq7fl7q it's confirmed hahahhaha no Hyperion pro for me, thanks. It was mostly for the color
@@NE_ADSo the M6 is better feeling/comfort than the Hyperion pro?
Mobapad M6 HD / Joycons wired connection on a Windows 11 PC:
In case anyone is interested, I will write down my personal failed experiments/attempts to connect the M6 HD and joycons to a Windows PC via a USB wired connection (without Bluetooth). If anyone knows what am I missing to get the wired connection working , please share it. Please bear in mind that I have not installed any joy-con driver nor attempted to use software mapping. I could follow up on a different message.
Shot-out to @ActionJaxonH as his video encouraged me to try it out with the nintendo charging grip.
As a mid bridge, I am experimenting with two products:
a) NYXI Rechargeable Mid Bridge. (showcased in this video at 2:20)
b) Official Nintendo Joy-Con charging grip (Note: you need to disassemble the mount holder for it to fit with the M6 HD)
Experiments:
Mobapad M6 HD:
A) Using NYXI Rechargeable Mid Bridge: Does not work. Windows does not recognize the M6 via USB connection
B) Using the Joy-Con charging grip: Windows recognizes both (left/right) mobapads as “Joy-Con charging grip”, however, it does not detect any button press. The lights on the charging grip oscillate up and down in red.
Nintendo Switch Joycons:
A) Using NYXI Rechargeable Mid Bridge: Does not work. Windows does not recognize the joycons via USB connection
B) Using the Joy-Con charging grip: Windows recognizes both (left/right) joycons as “Joy-Con charging grip”. However, Windows thinks all the buttons are constantly being pressed and released. Moving the right thumbstick sometimes triggers a reaction on the “point of view hat”. The lights on the charging grip are solid green.
Once again, if anyone knows how to get a direct wire connection between the M6HD or joycons and a windows pc., please share it with the community.
All the best
I had mine for about a month before they started drifting ever so slightly. No big deal, increased the dead zone. But then it started drifting up and to the left. Like hard. Spinning my character in place. Jiggle the joystick and it goes back to normal. It’s now 3 months later and I get about 85% movement from up down left and right. My diagonals show full movement, but moving my stick directly up, down, left, or right all the way, shows only about 85%. Pretty good for joycons. But definitely room for improvement.
I thought as "hall effect" joysticks there wasnt supposed to be any drift? Was there any way to fix them or is it still an issue? This is the only time ive heard of these having the issue and now im debating on them 😅
Im waiting for Mobapad to release accessories for them......for now im planning to diy skinwrap using those textured vinyl
Dumb question but what is the main difference between the two besides rumble and omron switches. Also, how much different are the switches anything noticeable?
Please I need to know how they are if you play them as separate joycons, I want to use them for Splatoon. The regular Joycons suck, but these look like they would fit comfortable using them separately with Gyro controls. But I have seen nobody make a video about it. Would these be good for splatoon with Gyro?
I have these but when I charge my switch they start rumbling and won’t stop?
Any vendors for mobapad m6S panels? not much on the official website
Where can we get the app for the Mobapads M6. I love mine and honestly will be returning my CRKD. You were and are 100% correct about your review for these amazing controllers for the switch. You all need to click his link, get yourself a pair and enjoy it. The HD Rumble is amazing and the comfort is what Nintendo should of made originally.
I hear CRKD is especially stubborn with returns
@@louisdellalucca8969 They might be but Amazon isn't :). I bought it through there so this way I could try it for 30 days and then return it if need be. I like it but the rumble and thumb stick on the right side are just huge turn offs for me. So I am going to return it and then just make sure that I order the case for the moba m6. Totally worth and so much better then CRKD.
I wanna ask, what is the perfect travel case for the mobapad m6?
I have OIVO Carry Case and I'm anxious if it will fit on that case
Two questions for me: how to use the coupons, and are there mouse click triggers on the pastel ones?
Do they work in a wired mode on PC (Not Bluetooth)?
Who fully turns off the Switch? Me every single time I stop playing
One thing I haven't seen mentioned is there any discernible difference in the quality and level of noise the mechanical buttons on the M6S make compared to the HD? I know the switches are different, but is one more loud/clicky than the other?
Nobody asked if you can separate the two controllers to play 2-players game on switch and pc ?
hi, the m6hd fit on hori split pad compact case?can you try it out?
I disassembled official joycon charge grip down to middle slab and use that as a Pro Controller grip. But if you're charging from an outlet while using other joycon in handheld it'll constantly disconnect because charging ones keep trying to connect. Just FYI
Does the official joycon charge grip allows you to use either joycons or the Mobapad in a pc via wired usb connection?
M6 HD using NYXI grip, How does it feel in hand? Does it feel tight? Is the control better gripped using the normal size of the joycon grip? Thanks for your responses
I love these joycons. They replaced my nitrodeck 😂 i hope they will be compatible with the next switch or i hope they make something for the switch 2 early in its life cycle
Im looking for a set of joycons with a dpad for fighting games for handheld gaming. Its extremely important that im able to 'roll' on the dpad. Rolling is going from one input to another in one motion. Something original joycons cant do because the buttons are separate and too far apart. People that play fighters will understand what i mean. Can you roll on these dpads? Can you pull a hadouken for example?
Also can you use nyxi stick replacements?
PS4 compatible?
I was curious about this also. I saw someone else playing fighting games using these joy cons and it seems to work.
@Jrstrdr I have some now and can confirm that although it is possible to input moves using the dpad, it certainly isn't ideal and couldn't be used other than casually. Each input on the dpad is still a click and doesn't roll. The dpad is made well enough though that a hadouken will register, just not everytime. Ultimately, where there's no denying that these are the best joycons on the market, you're still better off using a separate controller altogether for fighting games.
People who have these joy-cons on the Switch OLED, a question:
Do they fit well in the console's rails, or do they feel "wobbly"?
I bought a LinYuvo and had to return it because the fit was loose, unlike the original joy-cons that fit like a single piece.
Thanks a lot!
At around 1:30 in the video he says that they feel stiff on the rails, so no, they aren't wobbly! :)
@@Bliss_Kitty Thank you so much for the response
Do you work for them?
Thank you for answering some of my questions.
Late to the game on this, but is it possible to switch the X & Y, and A& B buttons to look like an Xbox controller?
Then remap the buttons to match?
Not sure if this is me just being stupid but received mine today and can't seem to assign face buttons on the right controller to the back button on the left controller. Tried the app and it only lets you remap one controller at a time rather than both as a pair.
Update:
Figured it out. In order to do this you have to use the app and set the back button as a macro. For example to set B to the left rear button you have to create a macro of press B 100ms release B.
You can't assign buttons from the opposite side joycon
@@PJNyte You can I figured it out, read the rest of my comment.
Hello Again Good Video Again you Need To Have 1M Subs For all your Hard Work Of Your Videos Your The Best Reviewer Of The Nintendo Switch Joycons And Other Accessories Of The Nintendo Switch Keep Up The Good Work😁😊
Hey so i loved my m6HD's, updated the firmware to the latest 1.48 via the iOS app and now they are bricks. No device recognizes them. Does anyone know how to fix this?
I ordered these not knowing if the app can be side-loaded on Apple. 😬
Can the joysticks be replace to the gulikit King Kong thumbstick kit? If not, can you recommend me some products like the replacement kit
Can these be connected to an iPhone and recognized as one controller? Like how connecting two joycons is recognized as one controller.
Sorry, can't test that! I used Android
Can you make a video on how to open the mobapad M6s
From what I have read the app allows for cross macro/remapping of the buttons. I don't have mine yet so I can not test it.
What thumb sticks fit or do you have to buy more mobapad sticks?
I tried in the app to see if I could map something from the right joycon to the left back button but no go so as far as I can tell it's just left button to the left controller and rights to the right.
What case r u using after applying these controllers my switch no longer fits n its case
Can the mobapad H6HD fit into Tomtoc Arcoss Switch/Steam Carry bag?
How do you update I keep getting “update failure prompt”
Can M6HD fit into tomtoc's seitch/steam carry bag?
Does mobapad m6 hd has better rumble than Gulikit kk3 max? I have Gulikit kk3 max and I don't much like the rumble
Got my Mobapad M6 HDs two days ago. Great except for one problem-the ALPS Linear motors (for vibration) come on at random and oftentimes won’t shut off until I shut off the console (it may just be the right controller but seemed like both a couple times). I’m emailing Mobapad back and forth trying to explain what’s going on and not having much luck at the moment. Hopefully, I’ll get it resolved. I’ll update this when I have some sort of resolution to the problem.
Did you download the app and update the firmware? My rumble would randomly do 1x vibrate and now and then when the switch was off, after updating the firmware it stopped! Keep us updated and good luck!
Yeah. I have the iOS app (v1.3.1) and it’s says my controllers are using the current version of the firmware (v1.14) and that no firmware update is available. Unless the iOS app doesn’t work properly and can’t fetch new firmware.
@@darkbidding did It get fixed?
@@caetanodantas4880thanks for reminding me about this. After a couple months of back and forth emails and many reminders from me saying that I needed my controllers replaced, they finally did send me a new pair. I think, ultimately, I just bugged them so much that they finally sent me a new pair to stop the barrage of emails. I will say it was quite difficult to finally get a new pair. Not the best customer service at all. But yeah, I’m good now. Resolved.
Question:
In what case will the Switch with these attached fit?
How’s the stick tension? I prefer firmer sticks compared to loose or sloppy ones. I’m really interested in these for smash bros. Have you had any experience with input delay compared to the standard joycons?
Ever so slightly looser than the official Pro Controller. The shoulder buttons are a huge disappointment though, especially the awkward sharp ended flat shaped L2 & R2 triggers, while L1 & R1 are on the mushy side. The controller is extremely annoying too since it sounds like a symphony of mouse clicks, especially when a game makes use of the D-pad. I couldn't stand it.
How hard is it just replicate the official Pro controller, slice it in half and make it work in handheld mode? The Moba 6 HD's just don't cut the mustard in my eyes. In most ways they're a step up from the Joy-con's, but intrusive mouse clicks firing at all cylinders, crummy shoulder buttons and even the slightly mushy B,A,X,Y buttons are all a step down for me. Joy-cons have lousy shoulder buttons too mind you ;)
Fix USB docking issue with a multi port usb on back port of switch.
Loved this review Q&A!
Do both dpads feel the same?
can you detach the analog stick?
Can you put these on a joy-con connector or whatever the middle piece is called to use it in docked mode like a controller?
If you make it fit, yes! (Use a saw on original Nintendos or use the Nixy one or wait)
Can the Nintendo Switch OLED stand by itself (using the build-in Kickstand) while the MOBAPAD M6 HD is attached?
Just tested mine and the OLED kickstand works fine.
Thanks@@rossserpant5827
What carry cases work with these? Or do you just order the one from mobapad when it comes back into stock?
There's a bundle that comes with a case. It's cost like 20 bucks more
What bag you think good for M6s?
They are dockable with OLED as well?
Yes
Thank you so much for the video!👍🔥 it is interesting and informative! Take care of your fingers🖖😅
If the HD has omron mechanical switches, what does the 6s have? And what's the difference?
If you watch one of his reviews, they're just unknown mechanical switches in the 6S
Can u do an comperosion for the mobapad m6 and hori split pad compact. I wish to know the size diferences! TY!
I have! It's going live this Friday :) stay tuned
Do these work on the original 2nd gen switch.
does anyone know hownto adjust the rumble for m6s?
Did anyone think it was worth upgrading to these from the satisfye zen grip?
Do they have the full functionality of regular Joy-Cons?
Late reply, but the M6 HD does!
the M6S has rumble, though its regular rumble rather than HD rumble
does it have waje up functionality?
We now know what the Switch 2 Joycons are going to look like. If Nintendo doesn't hit the mark on the next the Joycons like Mobapad M6 HD, I will be dissapointed
Do you have any links for alliexpress?
Thank you for your video. Does anyone know if there is a charging center piece (or Joy-Con charging grip) that can also transfer data? I have the MobadPad HD, and I would like to connect it to my PC via a USB cable. (I am aware that I can connect them via Bluetooth, but I'm curious if there is any Joy-Con to USB wired adapter available.)
Yeah it does work with the Nyxi centre piece you can see at 2:20
@@128KB Thanks for your quick reply. Does the Nyxi centre piece allows you to use the joycons in a pc via usb ? (Imagine I do not have Bluetooth on my computer)
Can these be used on android with gamepass?
will it fit comfortably in the skull&co max carry case?
Did it fit ?
@Kirkyboi07 still don't have an answer and not about to order but doubt it. Binbok/doyoky make a slim version thoigh that (again can't confirm) but appears to. About the wirh of the hori split compact
hi. im in europe. italy to be exact. how long will it take for them to deliver here? thank you.
Ask Chinese post office
I live in Greece and my parcel was delivered in about 11-12 days.
just got mine hd in the mail they are light and they feel great
Still ok?
Thanks for the answers!❤
if they came in red for my oled i might get one but i dont need one right now
Can you turn off rhe back buttons
What case work with m6 HD ?
Mobapad case
FINALLY SOMEONE JUAT LIKE ME. 😂😂 I do that exact same thing I have to wash my hands before I touch my controllers every single time. Because I hate when it get that sticky feeling and stuff. I actually been doing that for YEEEEEARRRRRSSSS over 20 years since the sega dreamcast days I been doing that and I'm 37 years old now. One of my biggest pet peeves is someone touching my controller before they wash there hands I always tell people I know I'm anal but u have to wash your hands before u touch my controller some even tell me then forget it they don't want to play and that's JUST FINE WITH ME lol.
Hey Andy! Thank you so much for your reviews here. They are insightful and so much fun to watch. I've got just a couple questions if I may.
1. Do you have any stick covers for the Steam Deck? I'm curious if they would work with the MOBAPAD.
2. Would you happen to have a horizontal comparison of the Hyperion Pro vs. the MOBAPAD M6 HD? I'm curious how far they extend to the left and right of the Switch.
Thank you!