shell and tube heat exchanger simulation in Aspen Plus and Aspen Plus Exchanger Design and Rating
ฝัง
- เผยแพร่เมื่อ 25 ส.ค. 2024
- Rigorous modelling of shell and tube heat exchanger in Aspen Plus and Aspen Plus EDR (Exchanger Design and Rating).
[non-chem engineering ] my personal website: www.sciencebehindstuff.com
Thank you so much from Brazil!
You are welcome!
Nice Explanation..Finally got someone knowledgeable with ASPEN video on you tube which is actually required in industry😀😀..
Glad you liked it
Thank you so much...
Great video.thanks for making us knowledgeable.
Is there any software to design agitator
do you mean designing mixing tank with agitator for a particular capacity and so on? I was going through a website the other day, see if its helpful : visimix.com/application-example/application-training-examples/
PS : Its demo version is limited. But I have not used it yet. Just have seen some docs, suggesting designing mixers
very useful video...
Thanks alot 🙏
good job
Thanks
Hi every one
I am using EDR 12 to simulate a shell and tube evaporator in which Cuprofin tube ( Inner Grooved Tube) manufactured by Wielnad would be used, but I can not know how I can input the specific parameter of the tube into EDR. Is there anyone to guide me?
Dear friend. Heat Flux is also equal to the enthalpy change between point 1 and 2:
Q = H1 - H2 or Q = m*(h1-h2). Thanks
Correct. Did I make any mistake ?
@@ParagPatilChemEngg You are really good teacher. Thank you
@@juanperdomo1 thank you very much.
Nice video ~ thanks. Well there are HTRI program which design the heat exchanger. Aspen EDR and HTRI which is more reliable when we design the heat exchanger? Thank you~
I have not used HTRI. So, I cannot say about it.
Aspen calculates a corrected MTD. Is this the same as the LMTD (log mean temperature difference) or is this simply the mean temperature difference ( AMTD)
MTD is mean temperature difference. LMTD is one of the types of MTD. Please read a book by Shah and Sekulic to get it more clear ! Thanks
thank you for your great work
I am looking for simulation video or documents regarding Shell & Tube evaporator design with EDR, and what type of shell and tube heat exchanger correpinding to tema standard its appropiriate to use as evaporator
hello, sorry for late reply. Please see the manual by Aspen itself. Its good ! I could do it from there itself. Also, see Aspen tutorials (webinars), they are usually free.
Hii.. It's v nice video .
I am looking for simulation video regarding Shell& Tube HE design for Multi- components vapour condensation .
please share
Okay. I will do it.
Do you have any case ? Or Can I just take any components and do its condensation ?
Thanks
@@ParagPatilChemEngg im interested also for multipass
@@wankryptoniteWhile designing the HX, you can a priori specify the # of passes.
@@wankryptonite Hi. in EDR, at time of 10:28 in video, you can specify some sizes in design; such as # of passes on tube/shell sides.
@@ParagPatilChemEngg i see. Thank you for helping so much with this video
Hi I followed your video and saved the file from Aspen Plus to EDR but when I opened the file on EDR its showing a lot of errors and a lot of the information which I inputted on Aspen Plus is missing. I wondered if you can kindly help?
Hi,
Sorry for the late reply. I think EDR file made within Aspen Plus will always throw errors.
Can you do one thing? Can you start directly modelling your heat exchanger from Aspen EDR directly ? Without going into Aspen Plus?
@@ParagPatilChemEngg Hi,
So what I did when I saw all the errors is I created a new file on Aspen EDR and did my HEX Design in there. To be fair Aspen EDR is fairly easy to use if you have the required information.
Thanks anyway!
@@ParagPatilChemEngg It's just that when I opened the Aspen Plus file before there was no data that I had inputted, hence why it was showing all those errors. I guess that's fine if you just need the TEMA sheet, costing and other documents but if you need the EDR file itself as well then you are better off solely sticking to designing on Aspen EDR. I hope this helps anyone else in a similar situation!
I have the same problem. If I change number of tubes, Aspen still shows 51. Unfortunatelly your video does not solve this problem.
I did not understand your question. What is 51 ? Can you please clarify your question little bit?
hello,i can't find link software,can you give me a link to download a solfware.thank you very much
Sorry for late reply. Please contact esupport@aspentech.com
They might help you !
Good
Thanks
how can i download this app
This is a software called Aspen Plus, which is a windows-based one
Do one for plate heat exchanger plz
Hi, yes sure . I will do it in due course of time. .....It is on my Plate :)
Nice vidéo but you didn't decreased the outlet temperature to 40 °c
Yes....I almost forgot it. You can do it by using the option of Design-Spec. Plz. let me know if you can , else , I will post another video about it
Thank you for your hardwork. I'm able learn more this video than from my 4 years of chemical engineering course in university. Professors are nothing but shit.. And you please send me any document related to guidelines of exchanger designs...
Brother, Thanks alot. I will post more videos like this soon. ( Unfortunately, the license we had is expired). I will share some documents with you. Please give me your email-address.
Thanks alot.
@@ParagPatilChemEngg awais.ahmed959@outlook.com
how can i download it !
What do you want to download?
You can contact any nearest university (with chemical / mechanical engg.) .They may help you out. Or you can buy personal license from AspenTech.