Kirsty A Since it's a low wattage device, try using 50/50 vg:pg e Juice or nic salt, so its easy to vaporize. Also keep the mod's open end down when not in use.
Hannah Ploechl : Nice to know that our innovative worked. (The main issue with this NOVO is e juice percolating through the sensor hole and affecting the circuits inside).
thanks brother, my vape had some juice in the hole between the prongs you were talking about. I held it upside down for 5-10 minutes then cleaned out the gross juice with a paper towel. Now it works perfect! thanks again
Fosilite At this point i think that Nord is a better device than Novo. Nord has replaceable coils, hence pod can be reused. Also market reviews are good about Nord.
Thank you so much, I was going crazy without nicotine. I used a heat gun to heat it up lool, and I think I ran into this problem in the first place because of overfilling cartridges and them leaking everywhere, I'll be more careful now
Such problems usually occurs due to liquid getting into the sensor port or vapor condensing inside the circuitry. Avoid flying with filled pod plugged in. Low pressure in the flight cabins might spill juice into the mod.
Try blowing in the charging hole and the top for like a min. Then wiggle the pod back and forth while u push it in for a min that the light should go on
Pressure transducer LOL! Oh man that’s a good one! Mine had a problem with the flux capacitor, but I held it up in a storm and a lightning bolt reenergized it.
I think you have to get a new pod because I have 2 novos and it’s not the novo that’s broken it’s one of the pods cause I also put it in the other novo and it wouldn’t hit while the other pod does on both
@@turdtapper1517 that's how mine is atm but its been working for as long as I can remember. I decided to pull it up and sure enough it worked again it was a struggle to get it though
so for the second part of the dry heat. do i need to heat up the pans after i put the novo in it or do i just put the novo inside and cover it without heat?
Sporty King The aim is to heat liquify the juice that has penetrated inside the battery compartment. Slight heating the device keeping it upside down (keeping the device in sunlight) may work.
Dear Nova, what i did is like this: After the whole body of the device enclosure got heated up to around 50 deg Celsius, i blew through the charging port to drive out the condensed e-juices through the small hole between the electrodes. But if there is too much percolating juice inside, you might have to repeat this process for a few times. But i stopped using Novo a year back. I found Renova Zero a better alternative.
Myself stopped using NOVO long back. Renova Zero having the same design, is literally trouble-free with good pod life. But the solution to such pod systems (negative pressure activated switching mechanism) remain the same: To pull out the vapour/liquid accumulated in the device by slight dry-heat and air-blow
I made it work for sometime this way. The mistake i made as a new vaper was using 70/30 vg/pg ejiuce in the SMOK NOVO pod. I should have used 50/50 nic salts instead.
I didn’t do the dry heat part and first tried blowing through the charge port and through the end the pod goes in and it worked for me!! So relieved as stores are closed right now and I needed the nicotine lol
![ทุกครั้งที่หลับตา (Lucid Dream) - AYLA's [ Official MV ]](http://i.ytimg.com/vi/4i1OBAQyv58/mqdefault.jpg)
Thank you! I tried blowing through both ends before resorting to the “dry heat” part and it worked like a charm!!! Appreciate your video so much!
Kirsty A Since it's a low wattage device, try using 50/50 vg:pg e Juice or nic salt, so its easy to vaporize. Also keep the mod's open end down when not in use.
Thank you so much
This worked for me! I held mind in front of a space heater then cleaned it out. Thanks so much!!!
Hannah Ploechl : Nice to know that our innovative worked. (The main issue with this NOVO is e juice percolating through the sensor hole and affecting the circuits inside).
i was able to apply suction from the top to clear the air holes. Thanks for the video.
Yes, we need to reduce the viscosity of the juice so that it can be sucked out of the holes
thanks brother, my vape had some juice in the hole between the prongs you were talking about. I held it upside down for 5-10 minutes then cleaned out the gross juice with a paper towel.
Now it works perfect! thanks again
Fosilite At this point i think that Nord is a better device than Novo. Nord has replaceable coils, hence pod can be reused. Also market reviews are good about Nord.
youre the man - thanks for explaining that! - I blew threw my smok pod/mouthpiece to expel some condensed juice and it works now -
When u showed where the pod went I just blew into it and it started working again lol thx brother
Bro your a life saver I did that shit and it worked
LIFE SAVER THANK YOU SO MUCH🙏🏼🙏🏼
Thank you so much, I was going crazy without nicotine. I used a heat gun to heat it up lool, and I think I ran into this problem in the first place because of overfilling cartridges and them leaking everywhere, I'll be more careful now
Such problems usually occurs due to liquid getting into the sensor port or vapor condensing inside the circuitry. Avoid flying with filled pod plugged in. Low pressure in the flight cabins might spill juice into the mod.
Oof I just barely did that on Sunday evening. That’s what I figured happened to it
@@asiansheep5407 good that it worked
Great video man! It helped me a lot 👍
patrick rahul Naveen Happy that it helped you.
Thank you only video that helped me
Great to know that your kit is working
DUDE you are amazing!!!!! thank you!!! so much
nothing worked for me brother... i used a screwdriver to open the cover and everything but it won’t work even doing the dry head meta
Juicy Jason broooo same nothing will fix mine 🤬
Ask for a replacement under warranty. I got my replacement within a month after this device stopped working altogether.
Try blowing in the charging hole and the top for like a min. Then wiggle the pod back and forth while u push it in for a min that the light should go on
Nour Shammaa thanks this actually worked lol
Safe donny now I can rip my thc and get anvilled
ur spice
isaac harris yeh only just found this out 1 year later
It’s working thank you!!
worked for me:,)
Pressure transducer LOL! Oh man that’s a good one! Mine had a problem with the flux capacitor, but I held it up in a storm and a lightning bolt reenergized it.
My novo 2 has the issue but nothing is working
I think you have to get a new pod because I have 2 novos and it’s not the novo that’s broken it’s one of the pods cause I also put it in the other novo and it wouldn’t hit while the other pod does on both
When you hit it dry it will fuck it up
One of the gold electrodes might be pushed down too far, try pulling it up with tweezers
@@turdtapper1517 that's how mine is atm but its been working for as long as I can remember. I decided to pull it up and sure enough it worked again it was a struggle to get it though
Lol yeah it works all I did was blow through the charger hole
so for the second part of the dry heat. do i need to heat up the pans after i put the novo in it or do i just put the novo inside and cover it without heat?
Sporty King The aim is to heat liquify the juice that has penetrated inside the battery compartment. Slight heating the device keeping it upside down (keeping the device in sunlight) may work.
THANKS WORKED
I LOVE U
I love u
Kyle Fenstermacher Welcome
👍👍
I poot it on de chargin and it wunt cunnet to server
Thank you!
Спасибо, а я уже выкинуть хотел❤
mine is blinking then it looks like it’s working but it’s not and the light is going off randomly
Dear Nova, what i did is like this: After the whole body of the device enclosure got heated up to around 50 deg Celsius, i blew through the charging port to drive out the condensed e-juices through the small hole between the electrodes. But if there is too much percolating juice inside, you might have to repeat this process for a few times.
But i stopped using Novo a year back. I found Renova Zero a better alternative.
U ment celsius degrees?
Centigrade is another way to say it
@@zacmeurer7749 hmm i see. Thanks
Yes. Centigrade and Celsius are synonumus.
I just dabbed the battery and circuit board with a dry piece of toilet paper, it soaked up the juice that was in the system
I can’t get the cover off and last novo I had did this and I can’t myself opening it
@@VixionsRevenge heat the cover up with smth like a hairdryer or a heat gun to melt the adhesive, then pry carefully
i’m having this problem right now
Myself stopped using NOVO long back. Renova Zero having the same design, is literally trouble-free with good pod life.
But the solution to such pod systems (negative pressure activated switching mechanism) remain the same: To pull out the vapour/liquid accumulated in the device by slight dry-heat and air-blow
Your smok novo has a virus
nwonkun yug lol
Does it work?
I made it work for sometime this way. The mistake i made as a new vaper was using 70/30 vg/pg ejiuce in the SMOK NOVO pod. I should have used 50/50 nic salts instead.
I didn’t do the dry heat part and first tried blowing through the charge port and through the end the pod goes in and it worked for me!! So relieved as stores are closed right now and I needed the nicotine lol
Its pronounced Smok not Smoke.
makes it worse some how
@Armando Varela what do u think
Can barely understand what he’s saying
rude
Then don’t watch it luv 🤦🏻♀️
Thank you!