Thank you for including the detail picture of the small chip that is in there. I must have dropped it when moving the integrated circuit but missed that little black chip. Seeing this in your video helped me fine it and now the car starts fine.
Helpful video. Two things would make ir better: 1) You show the light plastic bracket being removed, but not being replaced during reassembly. 2) You should recommend that someone try the key before super gluing it...and also indicate not to super glue the battery compartment as you'll need to change batteries at some point.
Exactly. Total BS video. The fob are really hard to get apart. He obviously took it apart and then just snapped it back together before making the video so that it would come apart easily during the demo. FAKE!
ao montar ele coloca o chip mas não coloca a peça branca de plástico que serve de base para a placa eletrônica da chave. Esqueceu e não foi macho prá refazer o vídeo reconhecendo o êrro.
@@wiktorwolny that's the battery compartment. The actual shell is very hard to get off on mine. Been prying and shoving screwdrivers in between it for 30 minutes and it's still not going anywhere.
After removing the battery shell, there is resistance in opening the rest of the case. Can I safely keep prying to open it? I don't want to force it and damage anything.
I got a small hack saw and carefully hacked around the remote. But don't cut thru tho just enough to weaken it's structure then pry it open with a flat screw driver.
This video is so fake.... First the case is glued together hard, it doesn't just come apart like that. Also the chip is glued in too. Very easy to mangle the battery contact plate doing this.
Thank you for including the detail picture of the small chip that is in there. I must have dropped it when moving the integrated circuit but missed that little black chip. Seeing this in your video helped me fine it and now the car starts fine.
I couldn't have done this with out the help of the great instruction video. Thank you big time 🇬🇧👍👍👍
Helpful video. Two things would make ir better: 1) You show the light plastic bracket being removed, but not being replaced during reassembly. 2) You should recommend that someone try the key before super gluing it...and also indicate not to super glue the battery compartment as you'll need to change batteries at some point.
Thanks very much for posting this video!!!!! I had inadvertently left out the 'transponder chip' and your video helped me very much!!!!! Thanks again!
Thank you, don't forget the chip, I did, but later found it on my work table.
Very helpful with your video thanks so much
great video thank u
Thanks, got it right on my 5th try!
Thank you very much for your help
Flip,parabéns pelo vídeo comprei uma capa mais não sei efetuar a troca, ainda bem que vi seu vídeo, obrigado.
Mim fale uma coisa, essa chave é igual da classe a 190 aut 2005?
U saved my lifen😊
si ripara il guasto al telecomando e dove metti le pile le due linquette una e rotta e non prende la batteria grazie
where can i find the spring ? i lost it !
Chip is glued down and I can’t even pry it out with a screwdriver. I love how it just falls out in this video. Not how they actually work.
Exactly. Total BS video. The fob are really hard to get apart. He obviously took it apart and then just snapped it back together before making the video so that it would come apart easily during the demo. FAKE!
ao montar ele coloca o chip mas não coloca a peça branca de plástico que serve de base para a placa eletrônica da chave. Esqueceu e não foi macho prá refazer o vídeo reconhecendo o êrro.
Necesito comprar el case de repuesto para cambiar el mio donde lo puedo encontrar?
How you gone leave a piece out?
Hello, What type of glue should I use on the chip and case? Thanks!
Mim responda por favor, vejo que vc colocou cola nas duas partes, e quando tiver de trocar ás baterias como fazer e o que fazer?
You didn't show us how to open the case it just opened?
Push the button to release the key. Pull the lower part of case upwards (you can see arrows sings on the side under the key). Voila.
@@wiktorwolny that's the battery compartment. The actual shell is very hard to get off on mine. Been prying and shoving screwdrivers in between it for 30 minutes and it's still not going anywhere.
A bit unsure about super glueing it shut. Gna be hell next time!?
bolero slx key repair kaise kare or muje nai key kaha pe milegi or kitne price pe milegi or duplicate key kaha milegi
After removing the battery shell, there is resistance in opening the rest of the case. Can I safely keep prying to open it? I don't want to force it and damage anything.
I got a small hack saw and carefully hacked around the remote. But don't cut thru tho just enough to weaken it's structure then pry it open with a flat screw driver.
Can't open mine, we need a sound track!
Many thanks.
thank you so much,
What is battery size for slk230 key replacement ?
2x cr2025
Thank you.
the original key is glued together any suggestions?
Break open
I broke mine trying to get it open, it was glued. Then I went to Mercedes to get a new one and they discontinued it and they told me I am out of luck!
danke schön :)
thanks u
I went to my Mercedes dealer and ,y key fobs were glued shut my Mercedes. They cannot be opened!
nicholascremato I had the same issue and tried to tear one open and ruined the components. Second one used wire cutters and succeeded.
I'd never glue the case together.
where did you purchase the shell?
+S GV i know this is late - but got mine on amazon.
Thank you! The part about changing the key blade was exceptionally helpful.
woow thanks.
مرحبا
كيف ابرمج ريموت A170cdi.....2000
you skipped the part where you actually open the original case. The factory one seems to glued shut...can't easily just pop it open.
This video is so fake....
First the case is glued together hard, it doesn't just come apart like that.
Also the chip is glued in too.
Very easy to mangle the battery contact plate doing this.