WPL Upgrade part 2 - Adding bearings to axles

So this did not worked as well as I wanted because of bigger bearings and I just ordered this:
www.banggood.com/WPL-Upgrade-...
and now is also in blue:
www.banggood.com/WPL-Truck-Up...
This is part 2 on how to modify WPL.
In last video I show how to remove bearings from axles and now I show how to put real bearings on.
I use MR63ZZ bearings with size 3x6x2,5 from here:
www.banggood.com/10Pcs-MR63ZZ...
and original bearings size is 3x6x2
It's good do buy also this gear puller:
www.banggood.com/Walkera-Moto...
It make it easy to remove bearings when they stuck
I use this metal drive shaft's for this project:
www.banggood.com/2PCS-Upgrade...
And My favorit one of best RC screwdriver set
www.banggood.com/8-in-1-Hex-s...
Music:
00:07 - 02:29 Dj Quads - Always
soundcloud.com/freemusicforvl...
02:29 - 06:19 Dylan Hardy - Strangely Unaffected
/ dylan-hardy-strangely-...
06:19 - 09:14 Aritus - Darling, You. (Feat. ConsciousThoughts)
soundcloud.com/aritusmusic/da...
09:14 - 11:26 Greemz - FRESH FRESH FRESH
soundcloud.com/freemusicforvl...
11:26 - 14:29 Greemz - NOZAHI
soundcloud.com/freemusicforvl...
14:29 - 17:47 Greemz - Sucre
/ greemz-sucre-free-musi...
17:47 - 20:30 Joakim Karud - dizzy
soundcloud.com/freemusicforvl...
20:30 - 23:14 Mulle - Freedom!
/ mulle-freedom-free-dow...

[@Adrian202]

So this did not worked as well as I wanted because of bigger bearings and I just ordered this:
www.banggood.com/WPL-Upgrade-Metal-Gear-Bridge-Axle-Set-For-116-Rc-Car-Trunk-p-1316673.html?p=5G2717320323201310AJ&cur_warehouse=CN
and now is also in blue:
www.banggood.com/WPL-Truck-Update-Metal-Gear-Bridge-Axle-Full-Set-For-B1-B24-B16-C24-116-4WD-6WD-RC-Car-Parts-p-1322545.html?p=5G2717320323201310AJ&cur_warehouse=CN

[@makewithmegma]

👌👍

[@ZulMasriAl-Kampary]

I thibk those hex wont last for more than 10 minutes

[@Adrian202]

Time pass and there are more and more parts for this cars so on new car I got that full metal axles and they are great :)

[@tatulyeghiazaryan9360]

Could you please say what size of screws do you use for the hexes and also for the steering linkage to axle connecting screws?

[@Adrian202]

As far as I remember most screws are 2mm

[@tatulyeghiazaryan9360]

@@Adrian202 Thanks!

[@Mattay20]

Are they stock axles with no mods or did I miss it lol. Tidy work

[@Adrian202]

Missing part :D
th-cam.com/video/aKJZPk211LA/w-d-xo.html&lc=z23pf5tgrtvewhthb04t1aokgngwbhfvwdi1jw0nxwxork0h00410

[@alanloosley3832]

Hi how do you keep the white plastic ends on.alan

[@Adrian202]

You can glue it, in the end I replaced axles with that new set with steel gears

[@1967gokhan]

mine's a little tense.
could it be because it is new?

[@Adrian202]

remove a little of wall that is next to that big gear on axle.
I found out that is rubbing with that gear on wall and that help

[@JosEssers]

what bearings did you buy? and where?

[@Adrian202]

Link in description, You will find there bearings and other tools that will help :) If needed I will post link here again :)

[@brunomundo9906]

Up grade and metal no in plastic

[@Adrian202]

I now will build JJRC Q61 with most of metal upgrades :)

[@emersonpedro3944]

Show,,,,,,,,,,,,,,