Hey Guys and Gals what an unbelievably awesome haul in today's video. Finally some pure Copper and not Copper coated aluminium from an old three phase Welder. A long breakdown, but definitely a fun one . Another awesome free piece from my friend, and a great addition to the stack so sit back relax enjoy but most importantly I hope you have an awesome weekend. Take care and see you all next Friday 👋🏻😃.
I remember I used to watch your videos when I was in my sophomore and junior years. When classes were stressful and hard to deal with, I would watch your videos to relax and get my work done. Now that I have finally graduated high school, I want to thank you for helping me get through it.
Well done getting through! We all struggle, in some way. And what better way to zoom out, cope or pull through than getting some BigstackD love? And BigsnackD is the best cooking channel on the 'tube on top of that!
I just love how we all are gathered around BigstackD's fire, mesmerized by the melting metal, the sound of the fire and sound of boots on rubble. This is cotton for my stressed brain. Also; love the birds and the dogs of course.Thank you!!!
Yes, I know the crows are bullies, but you should leave some raw peanuts in their shells out for them. Crows are extremely smart and see everything! They know you like pieces of metal and if you feed them peanuts, they will often bring you little gifts like nuts, bolts, screws, nails, coins, whatever they find that they think you'll like in payment.
100% befriend the crows! They are overly cautious because they are so intelligent they understand humans are often danger. Give them nuts etc for gifts and they will make it worth while
Fun fact, the Magpies are actually in the same family as the crows, the Corvid family. They are also extremely intelligent and tend to be less prone to negative behaviors. Some people have actually trained both magpies and crows to speak much like a parrot. I have seen first hand, a Crow dropping off gifts for food. It's pretty awesome how intelligent they are!
I was trying to remember what the wrinkles in metal after poring remind me of, and realized they remind me of the tops of brownies. I love watching the disassembly just as much as the melting, its always so satisfying to see you sort the metals after destroying something. No clue why. I am so excited every week to see what is new, thank you for being you!
As someone who was inspired to scrap and melt because of your videos, I have to say I like the copper pours the best. The way that it flows when pouring and feels when cast is so satisfying. I'm not able to source nearly as much copper as you, so videos like this allow me to experience copper pours vicariously through you. Thanks!!
Copper would have to be the favourite melt, for sure. The colour and the easy of flow when it's molten and how it dances about in the crucible. The worst is probably brass, due to it being quite, 'lumpy', when poured, as a result of not being able to heat it up quite as hot as you'd like because of the vaporisation of the zinc that turns into poisonous zinc oxide. Aluminium can be a bit, 'soapy', as well, if there's too much crud in with it, due the clean stuff melts better and looks great when it's that lovely cherry red colour when molten. You did exceedingly well in today's video.
I've been to scrap metal merchants today with an artic to deliver steel ! And I was told copper as gone threw the roof , your sitting on anice copper mine with what your melting . My friday when I've finished driving is my highlight watching you melt love your videos 👍🇬🇧
Great video. One of my favorite clips ever around 33:00, the long shot of copper melting and loading more through the top. I love those long shots of copper wire melting
I am from South Texas where is hotter than two suns and a BBQ right now. Thank you for your video it keeps me cool hearing you complain about the weather. I truly look forward to this channel in my summer time.
Copper is by far the melt favorite. Wondering if the wires that have a silver color contain a certain amount of silver. Can't wait for the silver contact recovery video. . . I don't think that was Bigstack's actual voice.
19kg! I love watching these colossal backyard melts! It would be great to see a 20kg bar or a colab with a local gold miner to refine tin! Much love from Cali!
My favorite melts are aluminum and my favorite pours are copper. But I really loved that video where you melted down all those matchbox cars! Those melts were satisfying.
i love- as YOU're doing - copper most. the advantage is- copper is mostly that pure- so you get no slack out of it. nearly always 100% Success! that-s SOO great😊 and also i love the copper-s "cleaning-out" after first ice-Wash. these colors are always that creat....
CEE and BigstackD. Two main meals every Friday morning. Lovely. Deffo need it today and looking forward to the melt. grateful for the smiles I get from all your graft.
Well, well, well what a Beautiful haul that was brother. Did notice some dog bone capisitors and adjustable resistors on them boards love welders brother stay safe catch you Friday bronze by the way
@@shawnwright4129 Cutting Edge Engineering. Really needs to be checked out pal. Kurtis Karen and Homeless the Staffy. Fab channel. I'm sure you'll like them.
@@busbey61 yes I wish he would pop open one of the red microswitchs they contain little tiny solid gold balls 0.002 grams each 8s 6s 4s and 2s. And the Io boards he calls back plane boards contain the most gold in comparison to any other components he throws them in shred madness
Ahhhh I missed watching this upon release! I was sooo busy. I’m so happy you have a set release schedule so I can ensure I keep up with your soothing videos :). Although I didn’t watch it at the start of the weekend, watching it today this Sunday has been such a treat to recharge my batteries to start the upcoming week :).
Back in the day this was one sturdy and quality welder , I know a good weldmachine when I see one 😂. The top part is for continuous welding at high amp ,the machine gets very hot because of that. The fact the cooling fan had a transformer with a temperature feeler. That transformer takes power from the machine's main current to feel when it starts to get more electric resistance then the fan kicks in. Back in the day this was a beast ❤😮 My favorite non ferro metal is copper and carbonsteel as ferro steel. High carbon gives those nice hot white sparks ❤
Another good haul Big D! The new machine will be able to cut up the copper as well! Make life a little easier in future. I see that you could get smashed with more rain over there! I'm the same as you, I love the rain! They call people who love rain Pluviophiles 😆 Take it easy mate. Have a great weekend.
Damn brother, I wouldn’t run around, telling my friends that I’m one of those Philes 🤦🏻♂️. Thanks again Grumpy man. Much appreciated. I see the BigStackD stompers coming to an end pretty soon can’t wait for you to travel over and have a few beers and we fire it up. You’re a champion mate don’t ever change.👊🏻😁
That’s cool bro, really appreciate it as usual. You should see Bullion lose his shit when he sees himself or ingot on the TV. He goes absolutely mad and tries to bite the screen. Luckily it’s too high for him to jump. sorry for the late reply mate take care buddy and talk with you soon
Oh my goodness that affect when you put the cable in at 34:50😍 This was an incredible scrap out and melt!! Divine! Was that 'a' voice I heard🙉😂 I do adore the look of molten aluminium but I'm a copper girl so I guess I'm going to have to say copper😁 Just as well with this whopper of copper ingots! The copper shingle was yum too. There is always something we forget to scrap! Great great video and a huge amount of work! Thank you for all the effort you put in💜
Love the Copper Loaves with their warm orange glow in the mold, twotone, and the freezing. The Brass is always so gnarly but you often polish to a shine, and the Aluminum comes out so perfect. Really like the disassembly, the ice and the pups ;]....watching for years....your 'new' location is great being in Nature. Thanks for sharing such a cool/hot craft and discipline. Cheers from Canada.
Hey buddy cheers for the super thanks muchly appreciated. I love your username, I wasn’t born until 77, but I can imagine how good of a year that was ! Have an awesome week ahead. Glad you’re liking the videos.👊🏻😁.
I always get excited about watching these videos and can only wish I could do what you do as a hobby but unfortunately money is tight right now so hopefully in the future I'll be able to do this.
Left-hand drive effect AND extended trailer backing scene? Yes please! Also favorite melt is always copper. Especially evening/night with the green flame and the heat glow. Thanks for the serotonin, have a great week!
Silver contacts process same as the one I sent. Clip 'em and dip 'em! Circuit boards got Copper, Tin, Silver, Gold, Silicon, Lead...too many different elements to just plonk in the acid and hope for the best. I'm working on a process. I'll send it off once I get it down. Good luck!
Of all of your casting I love the copper and aluminum ingots best. Their color shift is impressive. Coins and sand casting are ok for small items but nothing beats a solid bar or brick. Wishing you and your spousal unit a blessed week filled with gentle seasonally appropriate weather and restful evenings together. Don’t let you furry kids see you feeding the feathered friends. They may become jealous. Peace brother
Hi bigstackD, I like all of the metals you melt but I'm in love with what I call dancing copper, you know when it is melted and you show us inside the forge and it seems like the cooper is moving all around, looks like it's dancing to me. After the copper I like the Aluminum and lastly the brass, the brass seems to be the hardest one to master. But you're the closest thing to a master that I know of, but I think I'm right about that. Anyway love the video's, don't usually comment but always watch, so always be safe and wear your safety gear, which you are great about doing. Thanks for the vids. 😀✌❤
All good Buddy, I’ve got a pipe Crusher/Can Crusher/cable cutter/pipe cutter all in one being built for my friend on TH-cam who will be dropping it off in a few months. His channel name is Grumpy Harley Rider👊🏻😁.
I don’t know why, but I feel like I’ve gotten the impression lately that moneys been tight for you. I know you’re not getting nearly as many views as you used to. If that’s the case you should really tell us, if you actually needed the help I wouldn’t hesitate to do what you request that you put in every video description
Hey Josh, how are you Buddy ? money is always tight, especially with the new property and ongoing maintenance but nothing more than usual. Yes, the channel is probably at its lowest view wise in three years but it’s still cruising along so I’m not gonna stop any time soon mate. Yes, I put in the description how the channel can be helped without anyone really doing anything but I feel as though if I ask on a video it would come across a bit cringe as a lot of the people I watch will get on begging for views and subs and likes and it’s just Uncomfortable to watch in my opinion, But curious what Would give you the money right impression mate is it something I did or something you saw? As long as the beer budget doesn’t get touched, everything will be just fine 👊🏻😁
@@bigstackD good to know. And what made me think that? I’m not sure I should say, but it was a far off guess. I was trying to figure out why you suddenly started doing melting at night since in the past you always stopped melting when it got dark, my best guess was that something new started eating up your time during the day, I’m gonna stop there but am I getting close? 👀
Actually, nothing has really changed but we are a month into winter and the sun comes down and it’s pitch black normally about 6pm so that’s why I’ve been doing a lot more night melts. Normally during the day I’ll do property stuff kids stuff family stuff and as I’m still working that’s always taking up most of the time so that’s why 90% of my melts will be done in the afternoon that way I can enjoy a few beers with it as well, but you’ll definitely see a lot more night melts over the next few months as that’s just how it is over here it gets that dark so quick it’s crazy👊🏻😁.
"Howdy" from Texas USA (I never really use that "Howdy" word, but I it's iconic and now you have a mental image... ). I really enjoy your videos and your creative editing. Truly the only channel I never miss. I'm sure everyone who watches is like me in that we appreciate your commitment to releasing a new vid every week. My favorite melt metal is nordic gold simply because of the color when it is a good melt. I like copper second because when it is pure and up to temp, it pours so well and freezes in cool patterns. But to be honest, besides your witty ideas, I enjoy breakdowns most of all. I have the same approach to taking shit apart... if I can't do it with the correct tools, I fall back to more persuasive (bigger) tools but I am never defeated... it will always get deconstructed! Cheers from the other side of the world.
Great melt! I like the color of the gas that comes off an email to Copper. I like the individual fingerprints when they cool, like the glass like finish of the aluminum. I like the slag in the process of the brass. The reason you saw only one plane today was they are done stocking, the wilds with the drop bears. The crows are friends and they’ll bring you stuff. I like the different way you stripped, and do things! Did I see the fifth element stones? Dogs looked chipper today! You work your dirty little stripper hard today! Thanks for the video
That was a lot of copper! I love any metal melt but especially when it's really dirty and crusty at first, like out of the ground, with dirt and mud, things that other people would send to the dump and that gets turned into beautiful metal.
I would have to say that one, he speaks. Man of few words but when he speaks he speaks. Two, my favorite metal to see melted has to be copper. I love the green flame that copper puts out and the finished product often ( to me at least) has a rustic look that you can’t take your eyes off from. Hope you are doing well. Cheers from Las Vegas, Nevada USA.
Nordic Gold has always been my favorite thing you make. its so SHINEY. Now just record an hour long video of rain pouring down on that metal roof. that sound is so relaxing.
Favorite? Copper. Enjoy it more with my OOD. It’s cool watching you extract it from various parts. Stripping from various metals. Seems to take the melting process pretty evenly. It cleans out good before pouring and is extremely cool watching it solidify in the mold. It also buffs out good and shiny. COPPER!
I love watching the copper freeze after you pour it, but I love the pouring of aluminium. The surface tension is like water or mercury, and just looks so satisfying. Especially when you make the ingot as big as possible in the molds.
That is clean. it should be brought back to life instead of melting. I know that You can lots of those comments treat loosly but this one is reaally accurate. sorrry for a good welder machine . RIP
![[ドラクエ１０] バラシュナ４！今日は固定休みなのでまったり練習行ける人いたらいきましょう！[新人Vtuber]](http://i.ytimg.com/vi/kt4utiGPrsg/mqdefault.jpg)
Hey Guys and Gals what an unbelievably awesome haul in today's video. Finally some pure Copper and not Copper coated aluminium from an old three phase Welder. A long breakdown, but definitely a fun one . Another awesome free piece from my friend, and a great addition to the stack so sit back relax enjoy but most importantly I hope you have an awesome weekend. Take care and see you all next Friday 👋🏻😃.
Have a great weekend as well ! Greetings from Kent UK 🇬🇧
Thanks for another awesome video! Have a great weekend 🎉
Need a big brass melt wonder would make big source. Idk surprise us.
48:30 I wish you throw the rest of the ice in the bucket at this moment
Will with crap about ready to let loose in Europe you going to see a lot more spy plane😂❤
I remember I used to watch your videos when I was in my sophomore and junior years. When classes were stressful and hard to deal with, I would watch your videos to relax and get my work done. Now that I have finally graduated high school, I want to thank you for helping me get through it.
Congratulations on graduating!
Good work buddy 👊🏻😁
Well done getting through! We all struggle, in some way.
And what better way to zoom out, cope or pull through than getting some BigstackD love? And BigsnackD is the best cooking channel on the 'tube on top of that!
Привет просто хороший улов лайк🙏💕🙏💕🙏💕🙏💕🙏💕 👌👌👌👌👌🆗🆗🆗🆗👍👍👍👍👍
Gday mate from Auburn Alabama
HE SPEAKS!! Awesome!
Twice in 450+ videos. Refreshing, in that so many people simply won't shut up.
He said just enough to keep our interest going
Caught me off guard!!!
It's the first time I heard him. Caught me by surprise, but it was great to hear him.
Doesn't that go against ASMR rules??
"Okay, let's melt." - Those are the only spoken words I've heard on your videos in the over-a-year of listening. I feel honored. 😀 Cheers, Geezer939
Roll back to the episode where he cracks the 1 ton goal... "Thank you, all you beautiful people" :D
One time he said "very good" when looking at the stack, didn't he?
@@ashcraft555 somebody make a compilation of bigstackD speaking
Go watch his million sub special to the end. He talks more on that one.
Your videos have helped me “escape” some difficult times, man…thank you.
👊🏻
I just love how we all are gathered around BigstackD's fire, mesmerized by the melting metal, the sound of the fire and sound of boots on rubble. This is cotton for my stressed brain. Also; love the birds and the dogs of course.Thank you!!!
Yes, I know the crows are bullies, but you should leave some raw peanuts in their shells out for them. Crows are extremely smart and see everything! They know you like pieces of metal and if you feed them peanuts, they will often bring you little gifts like nuts, bolts, screws, nails, coins, whatever they find that they think you'll like in payment.
100% befriend the crows! They are overly cautious because they are so intelligent they understand humans are often danger. Give them nuts etc for gifts and they will make it worth while
Fun fact, the Magpies are actually in the same family as the crows, the Corvid family. They are also extremely intelligent and tend to be less prone to negative behaviors. Some people have actually trained both magpies and crows to speak much like a parrot. I have seen first hand, a Crow dropping off gifts for food. It's pretty awesome how intelligent they are!
Aussie crows must have different attitude. California crows are so much fun.
@@andrestein6022 teach them you like money they will buy food
Well said
Nothing feels better than a late night copper melt. The beautiful colors and the heat of the copper. The dragons breath.
I was trying to remember what the wrinkles in metal after poring remind me of, and realized they remind me of the tops of brownies. I love watching the disassembly just as much as the melting, its always so satisfying to see you sort the metals after destroying something. No clue why. I am so excited every week to see what is new, thank you for being you!
As someone who was inspired to scrap and melt because of your videos, I have to say I like the copper pours the best. The way that it flows when pouring and feels when cast is so satisfying. I'm not able to source nearly as much copper as you, so videos like this allow me to experience copper pours vicariously through you. Thanks!!
Copper would have to be the favourite melt, for sure. The colour and the easy of flow when it's molten and how it dances about in the crucible.
The worst is probably brass, due to it being quite, 'lumpy', when poured, as a result of not being able to heat it up quite as hot as you'd like because of the vaporisation of the zinc that turns into poisonous zinc oxide. Aluminium can be a bit, 'soapy', as well, if there's too much crud in with it, due the clean stuff melts better and looks great when it's that lovely cherry red colour when molten.
You did exceedingly well in today's video.
Well said buddy 👊🏻😁
I've been to scrap metal merchants today with an artic to deliver steel ! And I was told copper as gone threw the roof , your sitting on anice copper mine with what your melting .
My friday when I've finished driving is my highlight watching you melt love your videos 👍🇬🇧
I like watching you feed long lengths of aluminum into the crucible and watching it just disappear. And skimming off slag is the best part. 😊
Copper is my favorite...it comes out so clean and the way it freezes and wrinkles, it looks organic...thanks BigStackD
Anyone else agree that D is a happy camper, more than normal, in this video?
Great video. One of my favorite clips ever around 33:00, the long shot of copper melting and loading more through the top. I love those long shots of copper wire melting
I am from South Texas where is hotter than two suns and a BBQ right now. Thank you for your video it keeps me cool hearing you complain about the weather. I truly look forward to this channel in my summer time.
I love it for the same but opposite reason during my winter because it's 40 below here and BigStack D is sweating. It helps me defrost.
Copper is my favorite melt. Color, liquid appearance, and pours. I've also enjoyed you metallurgy and the math. Keep up my Friday evening escape.
32:23 - thát announcement was a bit unexpected 🤣🤣😜
I honestly believe that this is the first time I have ever heard him speak. And I have been watching since the old vault room in the old house.
i was also somewhat irritated 😂
@@davidwilkerson1904 You must have missed his 1000kg video then.
Copper is by far the melt favorite. Wondering if the wires that have a silver color contain a certain amount of silver. Can't wait for the silver contact recovery video. . . I don't think that was Bigstack's actual voice.
Awesome to finally hear your voice BigstackD . After watching for over 2 yrs I've never heard you speak.👍👍👍👏👏
I love to see the green flame as the copper melts , it's so mesmerizing .
I love watching copper go from that sort of dingy gray to a beautiful red. Love it!
It’s so cool watching the strips of copper melting. Thanks for sharing!
19kg! I love watching these colossal backyard melts! It would be great to see a 20kg bar or a colab with a local gold miner to refine tin! Much love from Cali!
My favorite melts are aluminum and my favorite pours are copper. But I really loved that video where you melted down all those matchbox cars! Those melts were satisfying.
i love- as YOU're doing - copper most. the advantage is- copper is mostly that pure- so you get no slack out of it. nearly always 100% Success! that-s SOO great😊
and also i love the copper-s "cleaning-out" after first ice-Wash. these colors are always that creat....
Aluminium! Just love those melts. Copper second.
CEE and BigstackD. Two main meals every Friday morning. Lovely. Deffo need it today and looking forward to the melt.
grateful for the smiles I get from all your graft.
Who is CEE?
Well, well, well what a Beautiful haul that was brother. Did notice some dog bone capisitors and adjustable resistors on them boards love welders brother stay safe catch you Friday bronze by the way
@@shawnwright4129 Cutting Edge Engineering. Really needs to be checked out pal. Kurtis Karen and Homeless the Staffy. Fab channel. I'm sure you'll like them.
Another one is ewaste ben, I wish he would start recovering his metals. He is on the other side of the country as BigStackD.
@@busbey61 yes I wish he would pop open one of the red microswitchs they contain little tiny solid gold balls 0.002 grams each 8s 6s 4s and 2s. And the Io boards he calls back plane boards contain the most gold in comparison to any other components he throws them in shred madness
Ahhhh I missed watching this upon release! I was sooo busy. I’m so happy you have a set release schedule so I can ensure I keep up with your soothing videos :). Although I didn’t watch it at the start of the weekend, watching it today this Sunday has been such a treat to recharge my batteries to start the upcoming week :).
Back in the day this was one sturdy and quality welder , I know a good weldmachine when I see one 😂.
The top part is for continuous welding at high amp ,the machine gets very hot because of that.
The fact the cooling fan had a transformer with a temperature feeler.
That transformer takes power from the machine's main current to feel when it starts to get more electric resistance then the fan kicks in.
Back in the day this was a beast ❤😮
My favorite non ferro metal is copper and carbonsteel as ferro steel.
High carbon gives those nice hot white sparks ❤
Greetings from Vladivostok, Russia.❤
Interesting find this time.
Great job, thanks for your new film
Another good haul Big D! The new machine will be able to cut up the copper as well! Make life a little easier in future.
I see that you could get smashed with more rain over there!
I'm the same as you, I love the rain! They call people who love rain Pluviophiles 😆
Take it easy mate.
Have a great weekend.
Damn brother, I wouldn’t run around, telling my friends that I’m one of those Philes 🤦🏻♂️. Thanks again Grumpy man. Much appreciated. I see the BigStackD stompers coming to an end pretty soon can’t wait for you to travel over and have a few beers and we fire it up. You’re a champion mate don’t ever change.👊🏻😁
Nice melt! My cat has been watching your videos with me ever since you introduced your bird buddies 😂. Have a great weekend!!!
My 🐈 is also enthusiastic about bird watching AND LOVES LOVES LOVES MOLTEN COPPER! He gets so EXCIGHTED when he sees copper wire entering crucible. 😊
That’s cool bro, really appreciate it as usual. You should see Bullion lose his shit when he sees himself or ingot on the TV. He goes absolutely mad and tries to bite the screen. Luckily it’s too high for him to jump. sorry for the late reply mate take care buddy and talk with you soon
@@bigstackDlol that’s so cute hahaha
My favorite metal that the melty man melts: COPPER. There's nothing like a clean copper pour, and that's why I'm here.
Oh my goodness that affect when you put the cable in at 34:50😍 This was an incredible scrap out and melt!! Divine! Was that 'a' voice I heard🙉😂 I do adore the look of molten aluminium but I'm a copper girl so I guess I'm going to have to say copper😁 Just as well with this whopper of copper ingots! The copper shingle was yum too. There is always something we forget to scrap! Great great video and a huge amount of work! Thank you for all the effort you put in💜
Spoken words! My favorite metal you melt is copper. Aesthetically pleasing.
As a Swede, a Nordic gold melt always makes me extra happy.
Seeing that copper melt NEVER gets old
Nordic gold has to be my favourite melts
Agreed, its what brought me to this channel in the first place
Love the Copper Loaves with their warm orange glow in the mold, twotone, and the freezing. The Brass is always so gnarly but you often polish to a shine, and the Aluminum comes out so perfect.
Really like the disassembly, the ice and the pups ;]....watching for years....your 'new' location is great being in Nature.
Thanks for sharing such a cool/hot craft and discipline.
Cheers from Canada.
Thanks! Definetly Copper & Brass!
Hey buddy cheers for the super thanks muchly appreciated. I love your username, I wasn’t born until 77, but I can imagine how good of a year that was !
Have an awesome week ahead. Glad you’re liking the videos.👊🏻😁.
@@bigstackD Yup your vid's are tons of fun
Hi BigStackD Casting & it's is Randy and i like yours video is Cool & Thanks BigStackD Casting & Friends Randy
Thanks for the awesome videos week in and week out 👍🏽
Copper is my favorite melt. The green flame, the shiny molten liquid, and the look of the polished brick or bar is just *chefs kiss.
I always get excited about watching these videos and can only wish I could do what you do as a hobby but unfortunately money is tight right now so hopefully in the future I'll be able to do this.
Australia is amazing. What beautiful birds.
Great timing. I was tucking myself into bed😅👍
Left-hand drive effect AND extended trailer backing scene? Yes please!
Also favorite melt is always copper. Especially evening/night with the green flame and the heat glow.
Thanks for the serotonin, have a great week!
You're my latest TH-cam addiction. I'm not even sure why. 😻
Silver contacts process same as the one I sent. Clip 'em and dip 'em! Circuit boards got Copper, Tin, Silver, Gold, Silicon, Lead...too many different elements to just plonk in the acid and hope for the best. I'm working on a process. I'll send it off once I get it down. Good luck!
hurray it's friday- and bigstack's coming!😂
and even with a loooong speach..... 32.25 yeah😂
I agree with the others i watch your videos and read my Bible and my stress 😬 goes away thank you sir watching from almost heaven West Virginia USA
Wow this episode really went to the birds!❤️🇨🇦
those shots at night of pouring the molten copper where mesmerizing
72 minutes of pure copper amazement
Of all of your casting I love the copper and aluminum ingots best. Their color shift is impressive. Coins and sand casting are ok for small items but nothing beats a solid bar or brick.
Wishing you and your spousal unit a blessed week filled with gentle seasonally appropriate weather and restful evenings together. Don’t let you furry kids see you feeding the feathered friends. They may become jealous. Peace brother
Indonesia selalu hadir mas bro 🇮🇩
52:25 That glass breaking sound effect in the distance 😂 that was so funny! 😂😂
Me emociona ser uno de los primeros en ver el vídeo, ahora toca relájarme y disfrutar! 😊
I love your long breakdowns, don’t mind them one bit
2am club waiting for the melt phone to ring
Copper. Love the color changes when you put it on the ice. Followed closely by the forbidden marshmallow of slag out of aluminum. 😁
Ohh I heard a voice, that's new
He did talk at the end of his video when he reached the one ton mark incase you didnt see it.
Actually silver is my favorite, but copper is a close second. Thanks BigstackD for these interesting vids.
40 seconds After being published, New record for me...
Hi bigstackD, I like all of the metals you melt but I'm in love with what I call dancing copper, you know when it is melted and you show us inside the forge and it seems like the cooper is moving all around, looks like it's dancing to me. After the copper I like the Aluminum and lastly the brass, the brass seems to be the hardest one to master. But you're the closest thing to a master that I know of, but I think I'm right about that. Anyway love the video's, don't usually comment but always watch, so always be safe and wear your safety gear, which you are great about doing. Thanks for the vids. 😀✌❤
You should get a hydraulic guillotine machine to cut the copper from the transformer..
All good Buddy, I’ve got a pipe Crusher/Can Crusher/cable cutter/pipe cutter all in one being built for my friend on TH-cam who will be dropping it off in a few months. His channel name is Grumpy Harley Rider👊🏻😁.
As much as I want to melt welding leads, they make the most awesome jumper cables.
Yes they do
I've never been first viewer before.
With melts like this one you’ll reach your next goal quicker than we think. Thanks for another awesome video
Hamburgers are all you see when you look at cows? How dare you that's disgusting. You're forgetting about all the steaks!!!
Mmmm steaks 🤤🤤🤤
And milkshakes 👌🏻
I like the Zinc melts/pours the most then the Nordic Gold.
I don’t know why, but I feel like I’ve gotten the impression lately that moneys been tight for you. I know you’re not getting nearly as many views as you used to. If that’s the case you should really tell us, if you actually needed the help I wouldn’t hesitate to do what you request that you put in every video description
Hey Josh, how are you Buddy ? money is always tight, especially with the new property and ongoing maintenance but nothing more than usual. Yes, the channel is probably at its lowest view wise in three years but it’s still cruising along so I’m not gonna stop any time soon mate.
Yes, I put in the description how the channel can be helped without anyone really doing anything but I feel as though if I ask on a video it would come across a bit cringe as a lot of the people I watch will get on begging for views and subs and likes and it’s just Uncomfortable to watch in my opinion, But curious what Would give you the money right impression mate is it something I did or something you saw?
As long as the beer budget doesn’t get touched, everything will be just fine 👊🏻😁
@@bigstackD good to know. And what made me think that? I’m not sure I should say, but it was a far off guess. I was trying to figure out why you suddenly started doing melting at night since in the past you always stopped melting when it got dark, my best guess was that something new started eating up your time during the day, I’m gonna stop there but am I getting close? 👀
Actually, nothing has really changed but we are a month into winter and the sun comes down and it’s pitch black normally about 6pm so that’s why I’ve been doing a lot more night melts. Normally during the day I’ll do property stuff kids stuff family stuff and as I’m still working that’s always taking up most of the time so that’s why 90% of my melts will be done in the afternoon that way I can enjoy a few beers with it as well, but you’ll definitely see a lot more night melts over the next few months as that’s just how it is over here it gets that dark so quick it’s crazy👊🏻😁.
@@bigstackD that’s awesome man, you keep doing you
All good mate 👊🏻😁
7:10 Lunch is looking pretty good! I always have room for a meal like that. Love me a good Full Aussie Breakfast. It's literally FABulous! 😋
first!
"Howdy" from Texas USA (I never really use that "Howdy" word, but I it's iconic and now you have a mental image... ).
I really enjoy your videos and your creative editing. Truly the only channel I never miss. I'm sure everyone who watches is like me in that we appreciate your commitment to releasing a new vid every week.
My favorite melt metal is nordic gold simply because of the color when it is a good melt. I like copper second because when it is pure and up to temp, it pours so well and freezes in cool patterns.
But to be honest, besides your witty ideas, I enjoy breakdowns most of all. I have the same approach to taking shit apart... if I can't do it with the correct tools, I fall back to more persuasive (bigger) tools but I am never defeated... it will always get deconstructed!
Cheers from the other side of the world.
For every like this comment gets I will do 0.05 situps
Your up to six and don't cheat!
0.95 sit-ups almost a full one
Bro at one push up and 40% of a second
Keep it a nonmultiple of 20. I want to see this
3.5 situps now
Great melt! I like the color of the gas that comes off an email to Copper. I like the individual fingerprints when they cool, like the glass like finish of the aluminum. I like the slag in the process of the brass. The reason you saw only one plane today was they are done stocking, the wilds with the drop bears. The crows are friends and they’ll bring you stuff.
I like the different way you stripped, and do things! Did I see the fifth element stones?
Dogs looked chipper today! You work your dirty little stripper hard today! Thanks for the video
Awesome video nice copper bar's and aluminum and brass bar's thanks for sharing bigstackd
Okay, let's melt!! Another voice over 😊
Nordic Gold!! Copper as well. The birds are really entertaining too
That was a lot of copper! I love any metal melt but especially when it's really dirty and crusty at first, like out of the ground, with dirt and mud, things that other people would send to the dump and that gets turned into beautiful metal.
These are my favorite videos! Finding random crap, stripping it down and enjoying all that copper pouring
Very relaxing to watch.
I would have to say that one, he speaks. Man of few words but when he speaks he speaks. Two, my favorite metal to see melted has to be copper. I love the green flame that copper puts out and the finished product often ( to me at least) has a rustic look that you can’t take your eyes off from. Hope you are doing well. Cheers from Las Vegas, Nevada USA.
I like it when you make Nordic Gold. A big Hello from Ohio USA. Keep up the good work, I love watching your videos.
Favourite melts have always been the alloys. Always a fan of seeing outcomes of strange mixtures.
I dont care what you melt big man , you just keep doing it🤣 Aluminum is always a fun one though. I just miss the ice cubes🥲🤣.
Youre the man!
I could watch you melt copper all day! Copper and Tungsten are my two favorite metals.
Great video brother from the imperial county California 👍🇺🇲
Fav Metals: Copper, Brass & Bronze.
Looks better when polished too!
Nordic Gold has always been my favorite thing you make. its so SHINEY. Now just record an hour long video of rain pouring down on that metal roof. that sound is so relaxing.
My goodness.. those shots of the burst egg yolk on the toast.. that looked delicious!
Favorite?
Copper. Enjoy it more with my OOD. It’s cool watching you extract it from various parts. Stripping from various metals. Seems to take the melting process pretty evenly.
It cleans out good before pouring and is extremely cool watching it solidify in the mold. It also buffs out good and shiny.
COPPER!
I love watching the copper freeze after you pour it, but I love the pouring of aluminium. The surface tension is like water or mercury, and just looks so satisfying. Especially when you make the ingot as big as possible in the molds.
I like the copper best it makes a beautiful blue-green flame... mostly🎉🎉🎉
Copper and zinc!. Great how you snuck in a few words at minute 32.
That is clean. it should be brought back to life instead of melting. I know that You can lots of those comments treat loosly but this one is reaally accurate. sorrry for a good welder machine .
RIP
One of the best videos in a long time, copper is my favorite, and your videos help relax me thx