Are the transistors just there so no current will flow once the potentiometer is turned down far enough? Could they be removed and have the leds just on the potentiometers?
Yep, again a very clear explanation of a clever circuit, that can be used to learn or amusing yourself. Very well done, brother, I enjoyed your video 100%. Have a wonderful, prosperous and blessed future, brother. Stay safe, healthy, strong and happy 👋 💖✌️🍀🍀🍀❣️
This is a great project. Thank you for sharing your fine work. I am not a techie so learning is slow. I want to control RGBW 12volt strip led. If I make a board with 4 of each components will this work and can I input 12 volts instead of 5 volts. Please advise. Regards Ernie
Not sure about how much this circuit eat away power or how long it can support. Its not much of how long the strip is, but how much current draw it demands. You can find that out from the manufacturer of the strip or trying to find the datasheet for the led element it self, but for the potentiometer long as its same value it should be fine, just find data sheet for knob version he uses and one you plan to use, compare and look right points. Least this is my understanding
What you think hacktubers,am I explain the circuits good?
yes bro you explained nicely
yes brother your explanation is awesome
Thank you
Thanks man
Thanks man
I finally found the time to finish this little project up.
I have a short string of 12v RGB LED's.
Works great.
:)
Thanks Hacktuber!
10 th like from me
The best
Teacher: what is impossible
Student:get a heart from hacktuber
bro love from India 😍😍
Nice and good work welcome
Super rrrrrrrrrrrrrrrrrrrrrr 👌❤️👌❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️ video
I think red led is not getting full current looks very dim than blue and green
It’s the long wavelength of the red colour. Have a great time. Blessings to you and your ✌️🍀❣️
First
👍😍
awesome video brother amazing concept.
i am not first,
i am not last,
when notification comes i click fast...
self blinking by ATtiny13 or xxxx?
Are the transistors just there so no current will flow once the potentiometer is turned down far enough? Could they be removed and have the leds just on the potentiometers?
Without transistors you gona burnout potentiometers
Could you use a 2n2222 transistor?
Yes you can
Making a 100watt smd led driver sir..
Bro can I use the same circut for big led strip with 12v 1/1.5A
Awesome 👍😊👌 bro keep it up and love from BANGLADESH 🇧🇩🇧🇩🇧🇩
Beautiful 👌
👍👍👍Awesome👏👏👏
It is great to see this RGB led control circuit while I was searching it for a week.
Thanks, well appreciated.🤗🤗🤗
No problem
Hello, good work! Can I also operate this with 12v?

Yes, of course if led strip is 12v
Amazing. Will this work for a 24v RGB strip? How will the resistor values vary? Thank you very much.
Yes it will work.
Is it possible to replace the 3 potentiometer with a single switch to cycle between different colors ?
without using microcontrollers
The circuit work without IC,cycling thrue colors only with pots
Yep, again a very clear explanation of a clever circuit, that can be used to learn or amusing yourself. Very well done, brother, I enjoyed your video 100%. Have a wonderful, prosperous and blessed future, brother. Stay safe, healthy, strong and happy 👋 💖✌️🍀🍀🍀❣️
Thanka for kind words,stay safe also
It clears my fundamental
This is a great project. Thank you for sharing your fine work.
I am not a techie so learning is slow.
I want to control RGBW 12volt strip led.
If I make a board with 4 of each components will this work and can I input 12 volts instead of 5 volts.
Please advise. Regards Ernie
From Mexico City I send my congratulations, thank you very much! :D
That's cool 🔥🔥🔥
🥰🥰🥰🥰
Love from Bangladesh 💕
Awesome!!
Nice
Thank you for that, i love your vids but can you make another one like that but using MOSFET for high current?
Nicely explained dude!
Wow
Iike
👍👍👍👍👍👍👍
I have a common cathode RGB LED, any way to wire it so I can adjust the positive?
You and electro boom are asom
Does it work with RGB 5050 60Leds /1Meter Model with 12V?
I bought underglow for my car, how could I learn which of the 4 pins in a connector are ground and which are red,green,blue?
Usb rbg mixer
It will convenient for viewer, if you mention parts name/capacity on the screen.
which type of wire you are using to
magnet wire
Can u make wireless charger for any phone which even doesnt support it...plzzzz..can copper coil will work???
THATS IMPOSIBLE
Can this circuit handle 0.40ma?
I really hope if u can give some link to buy :)
Hello
Does this work for the 1m rgb strip? I'm trying to do with thumbwheel potentiometer instead of the knobs.
Not sure about how much this circuit eat away power or how long it can support. Its not much of how long the strip is, but how much current draw it demands. You can find that out from the manufacturer of the strip or trying to find the datasheet for the led element it self, but for the potentiometer long as its same value it should be fine, just find data sheet for knob version he uses and one you plan to use, compare and look right points. Least this is my understanding
Where are you from?
Can it work with 12v
Privet, est' po ruske perevod?
Sorry
I am from India
Make a 💯 watt smd led simple constant current circuit driver sir plzzzzz....
If you need constant current you need to use mosfet, check circuits on web, make calculations and you're done
Can i request the circuit diagram and wiring for the rgb wire
India""s
👍
Ok
OMG👍
and I have the same watch as yours
Nice