That's good, not only a convenient way to ascend with a friction saver but also to decrease the weight at your tie in point by talking weight off the base anchor.
instead of the ring I personally use a screwgate, like this its midline attachable =) also i often install it under my anchor point that makes it retrieve easy and in case the anchor point fails you might have a second point that catches you =)
I’m just a beginner Home tree climber and trimmer but couldn’t you use two carabiners instead of one ring and not even install it on your line till you get up into the tree ?
I'd say you can do whatever you want, but if you want to retrieve from the ground, you'll need a way to make one end of your sling be caught by whatever you pull up to retrieve the sling. Like a friction saver has a big ring and a small ring. Your knot, throw weight, retrieval ball etc. will go thru the big ring and get caught on the small ring, allowing you to pull the friction saver from the tree union. If you use two carabiners, you need a way to get your retrieval object to catch on the second carabiner. I'll think about creative ways to accomplish that. "Chicken Rings". You might be able to clip on a small carabiner to catch on the second big carabiner when retrieving?
Yes and no. If a canopy anchor was not desired, you could just run the rope through carabiners but you would have a redirect, and it may not be retrievable. The ring is necessary here, so that the blocking knot does not pass through, if a carabiner was used instead of the ring, it may pass through.
Also nice guy Dave his buddy Jay I believe does a video on this same technique but with a spliced saver chicken rings I believe. The climber 🧗♂️ is out pa...
One of the best videos I've watched. Makes so much sense
That's good, not only a convenient way to ascend with a friction saver but also to decrease the weight at your tie in point by talking weight off the base anchor.
Fantastic, so simple!!!
Thank you! Cheers!
Really cool. Going to use this. Thanks.
That's a good idea. I'll have to try that
Buen video maestro 👍👍
instead of the ring I personally use a screwgate, like this its midline attachable =) also i often install it under my anchor point that makes it retrieve easy and in case the anchor point fails you might have a second point that catches you =)
We wouldn't recommend a Screwgate for life support instance in Tree Care. However, different industries are given the ok to use screw gates.
I was going to say the same thing, but using a Notch Quickie instead of a screwgate.
Can you make the video of the bowline base anchor pls
I have included a link to one of our videos that shows the Bowline w/ Yosemite back up >>> th-cam.com/video/HvibubRyaj8/w-d-xo.htmlsi=iLmAfcSBiw0JasQ0
Very nice. I've been wondering if this was possible.
I been trying to figure out how to do a retrievable srs that isn't tied at the base
can you explain how it is retrievable?
We will work on a video showing how to retrieve this system.
😮nah benar saya sendiri menggunakan cara seperti ini ketika memanjat dan menebang pohon
Do you give a training for new claiming I want to learn as a beginner I live in long island New York
Link to the original video???
I’m just a beginner Home tree climber and trimmer but couldn’t you use two carabiners instead of one ring and not even install it on your line till you get up into the tree ?
I'd say you can do whatever you want, but if you want to retrieve from the ground, you'll need a way to make one end of your sling be caught by whatever you pull up to retrieve the sling. Like a friction saver has a big ring and a small ring. Your knot, throw weight, retrieval ball etc. will go thru the big ring and get caught on the small ring, allowing you to pull the friction saver from the tree union. If you use two carabiners, you need a way to get your retrieval object to catch on the second carabiner. I'll think about creative ways to accomplish that. "Chicken Rings". You might be able to clip on a small carabiner to catch on the second big carabiner when retrieving?
Yes and no. If a canopy anchor was not desired, you could just run the rope through carabiners but you would have a redirect, and it may not be retrievable. The ring is necessary here, so that the blocking knot does not pass through, if a carabiner was used instead of the ring, it may pass through.
what prusik cord climbing hitch do you use?
Typically, 9mm Epicord is the go to. The one in the video was gifted to try out.
@@BartlettArboristSupply ok...i was just wounding what knot you used with it?
Oh, my bad😅...
He is climbing on the Cataylone Hitch
@@BartlettArboristSupply ty
Also nice guy Dave his buddy Jay I believe does a video on this same technique but with a spliced saver chicken rings I believe. The climber 🧗♂️ is out pa...
I will check it out, thanks!