Thank you for this information! you are the good type TH-camr really helpful 🙏 maybe you can help brother.. I have a bmw E30 but I have swapped the engine to a Nissan SR20 DET and I need to feed a signal to my tachometer do you know from where I can get my signal connection? Is it from the coil signal wire or the injector pulse wire? I have no idea how to get a signal.. maybe both coil to pin 7 and injection pulse to pin 11? Please advise 🙏
Very cool troubleshooting that e30 cluster...the fix was amazingly simple! Thanks for the vid!
Thanks for posting this. My cluster had an identical failure to yours - right illumination and left turn signal indicator!
Loving your intro! You're getting it super dialed in. Awesome video as well.
Thanks!! Not Too verbose on the intro u think?
Nice video. I learnt some stuff!
Thanks for sharing I’m enjoying your videos.
Thank you for this information! you are the good type TH-camr really helpful 🙏 maybe you can help brother.. I have a bmw E30 but I have swapped the engine to a Nissan SR20 DET and I need to feed a signal to my tachometer do you know from where I can get my signal connection? Is it from the coil signal wire or the injector pulse wire? I have no idea how to get a signal.. maybe both coil to pin 7 and injection pulse to pin 11? Please advise 🙏
Man this is golden
Hey, that was actually really helpful. Trying to figure e28's dash that's missing some lights..
Hahahah glad to help!!
great videos. very helpful!
Would have been useful if you showed how to take out the cluster.. but this is great…
Awesome
thats cool. i wonder my gas gauge never turns on when the fuel is low.
The 55lt tank has one sensor the 62lt tank has two so each one needs the appropriate gauge
Literally exactly the problem im having with my cluster. Mines an 89 too, wonder why ours are failing the same way.
I think it’s because of the expansion and contraction do the heat. And I think generally the copper traces are just fragile
@@Garageaholic i was thinking about just sending it to bavarian restoration and be done with it
Same problem with my 89 325i. How did you find the break in the trace for the blinker?
Fast blinking means that one of the two bulbs on the turn lights is blown
Just replace the bulb on the non working light
Awesome👍🏽
Really nice Job! How can i diagnose a faulty rpm gauge? Works only from time to time ...
I'd start by replacing just the gauge and see if it comes back. Trial and error is probably your best bet here!
Garageaholic going for it then
Pls read the wire for the speedometer,mine isn’t working there’s a problem with the board
can I ship my cluster to you ?
Hey George - Sorry not taking customer cluster jobs at the moment :)
You need to fix one thing... Please less talk in the intro 😂
Noted thank you for the feedback!!!