Great Info. I used a razor knife and just cut the hole as big (rectangle, same place as yours) as I needed to fit the wire stub. Worked great. I also pushed mine up behind the nose piece very close and used a rectangular piece of flat aluminum and drilled a couple holes in that to use to put the first set of double screws from the front, I overlapped the plastic on both sides. It worked great. Rock solid. Thanks for the help!
I have a 2019 hobie outback and I'm installing the same fishfinder on mine. I was just wondering where did you get that bumper piece for the transducer?
I'm looking to do the same on my outback with a 64cv. Did you use the RAM universal track ball mount for this? I'm having a hard time finding any info on which mount I need for a garmin echomap. Thanks.
I believe this is the one I used. RAM Mounts RAM-111U powder coated marine grade aluminum mount, consists of a double socket arm mount, one 2.5" diameter round base with 1.5" rubber ball and flat 6.25" x 2" rectangular plate.
Great video man. I bought my Hobie back in July. But couldn’t afford a fish finder. I very much planned on going with Lowrance because it is Hobie compatible I even bought a mount for the unit I wanted. Hook2 5 triple shot. My birthday is coming up in a 2 weeks and I go on vacation this next week so my wife and kids hooked me up with 400.00 in Bass pro shop gift cards early so I could use it on my vacation. The Lowrance unit I wanted was 429.. So when I got off work I checked the ad hoping it would be on sale. I saw the Garmin was on sale for 300 off. So I jumped on it. I’m about to go watch some more of your videos I hope to see your fish finder in action.
Just a 2-pin trailer connector you can buy anywhere. $2.99 at Autozone. www.autozone.com/electrical-and-lighting/trailer-wire-connector/hopkins-towing-solution-12in-2-pole-flat-connector-set-47965/141583_0_0?spps.s=5521&cmpid=LIA:US:EN:AD:NL:1000000:GEN:71700000069889792&gclid=CjwKCAjwzMeFBhBwEiwAzwS8zFmStVGE6v8uH62qkoLv_RS7q1I2pxrt9PdoshLDWapW0_i4w8aWqxoCKVYQAvD_BwE&gclsrc=aw.ds
You have no idea how extremely helpful your video was. I bought the 93 sv and it all worked the same. Thank you!
Glad it helped. My Garmin has worked well, enjoy yours.
Great Info. I used a razor knife and just cut the hole as big (rectangle, same place as yours) as I needed to fit the wire stub. Worked great. I also pushed mine up behind the nose piece very close and used a rectangular piece of flat aluminum and drilled a couple holes in that to use to put the first set of double screws from the front, I overlapped the plastic on both sides. It worked great. Rock solid. Thanks for the help!
Well done
👍🏻👍🏻👍🏻well done- I watched this video a few months ago and finally made the garmin purchase and you video helped so much with the install
Glad it was helpful. Garmin is a great unit.
Great video! Hows the side imaging with it mounted with the guardian? Any interference from the hull?
I have a 2019 hobie outback and I'm installing the same fishfinder on mine. I was just wondering where did you get that bumper piece for the transducer?
Came with the Outback when I purchased it from the dealer. I'm sure you could go on Hobie's website or dealer if you can't find it.
I'm looking to do the same on my outback with a 64cv. Did you use the RAM universal track ball mount for this? I'm having a hard time finding any info on which mount I need for a garmin echomap. Thanks.
Gabe I used RAM-111B-354-TRA1U mounts in the track. Simple holes lined up for the Garmin. Good luck.
@@MrBigFishJoe thank you, just ordered it
Where did you get the bumper shield?
The shield comes with the Hobie Outback kayak for the mounting of a side scan unit.
Nice work what’s the detail of the holder unit ?
I believe this is the one I used. RAM Mounts RAM-111U powder coated marine grade aluminum mount, consists of a double socket arm mount, one 2.5" diameter round base with 1.5" rubber ball and flat 6.25" x 2" rectangular plate.
BRAVO I search a lot to find instructions for installation garmin transducer on a hobie outback 2019
Glad I could help. Hope it works well for you.
Great video man. I bought my Hobie back in July. But couldn’t afford a fish finder. I very much planned on going with Lowrance because it is Hobie compatible I even bought a mount for the unit I wanted. Hook2 5 triple shot. My birthday is coming up in a 2 weeks and I go on vacation this next week so my wife and kids hooked me up with 400.00 in Bass pro shop gift cards early so I could use it on my vacation. The Lowrance unit I wanted was 429.. So when I got off work I checked the ad hoping it would be on sale. I saw the Garmin was on sale for 300 off. So I jumped on it. I’m about to go watch some more of your videos I hope to see your fish finder in action.
@@SOLDIERx4xCHRIST The Garmin Echomap 73SV was $300 off that I bought. Works great.
Hi where can i buy power cable connectors? What are they called?
Just a 2-pin trailer connector you can buy anywhere.
$2.99 at Autozone. www.autozone.com/electrical-and-lighting/trailer-wire-connector/hopkins-towing-solution-12in-2-pole-flat-connector-set-47965/141583_0_0?spps.s=5521&cmpid=LIA:US:EN:AD:NL:1000000:GEN:71700000069889792&gclid=CjwKCAjwzMeFBhBwEiwAzwS8zFmStVGE6v8uH62qkoLv_RS7q1I2pxrt9PdoshLDWapW0_i4w8aWqxoCKVYQAvD_BwE&gclsrc=aw.ds
I just installed mine (same exact setup) but I had the cable run thru the opening instead on drilling the retractable plate.
Enjoy!
I’d like to buy one
Seems like a royal pain in the ass to me. I hope my 22 isn’t like this.
It really wasn't that different from the normal install just make room for the Garmin cable.