Thank you for your observation, but kindly note that this production gave us 117 bars of 150g you can then do your calculation, based on where and how you procured your ingredients. anyhow you make enough profit given the quantity. and we have not added and cut-off from the cutting which can be remelted.
Thanks for being here truly I don't know how to send chemicals to Gambia except if you have any contact we can purchase chemicals and send through them
Sorry am asking too many questions. What is the quantity of silicate used and the sls is it meant to the disolved in part of the water for the production or is it liquid Sls Thank you.
pls after making my soap i note that they is enough seeds inside my soap, i use a day bleached palm oil and water touch my custic soda same yesterday,pls make is that the cause
You can use only pko but the percentage of water will be reduce to 80% because pko alone cannot contain much water in it otherwise the soap will be soft
Wow,thanks for this video it came at the right time you just gain a subscriber pls I look forward for more video God bless you I had very hard bars thanks so much
Thanks mum please help me anytime I made soap I left it there for one or two weeks the body becomes like putting salt or sugar on it please help me to stop it
Ma pls i ve soap i did using 3200L of oil(tallow and bpo 50 50) bt it thicken then i had to cook it bt its 3days nw yet it is nt dried so i jst left it in d mold. Pls ma i need help. I used 426g of caustic and water is 3tyms d caustic
Hello so sorry to hear that but first bleached palm oil and tallow are both hard oils okay so I would advice you use the combination of oils I have here because tallow is hard oil while pko is a soft oil
I'm sorry to hear about that. Please ensure you follow the instructions and especially the measurements. If there's any portion you didn't understand we'll, kindly reach out.
You can make your soap with caustic that you just soaked,the method is called semi hot process where the caustic solution cooks the soap while the one you ferment your caustic is used for cold process soap hope I have answered your question?thanks for stopping by
Thank you so much ma'am for this video. Ma i have been doing cold process soap since but trying to do this semi hot process soap using your procedure, my soap is just watering and not able to thick Please can i get your Whatsapp number. Thanks ma
Am so sorry to hear that your soap is watery but please ensure your calculations are right okay this procedure here is what I even use for my own productions so if you don't mind can you state the chemicals you used and the quantity for me to see also the quantity of water and oil okay
Thank so much for sharing,❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤
You are welcome
Thanks for sharing ma bu please ma the measurements are not show eg caustic,sls, silicate, calcium and soda ash thank y
It's boldly written on the video just watch the beginning of the video you will see it
Wow... ... Thanks for this
Thanks.
Thanks for sharing knowledge
You're welcome
If what you got from 8ltrs production is 100 bars of 150g soap, how profitable is it, considering the cost of production?
Thank you for your observation, but kindly note that this production gave us 117 bars of 150g you can then do your calculation, based on where and how you procured your ingredients. anyhow you make enough profit given the quantity. and we have not added and cut-off from the cutting which can be remelted.
Please how do I get contact with you
If i use a 12.5% for my caustic. Will it come out fine?
Thank you ma'am for this knowledge,...in absence of talo and pko, can red oil and vegetable oil be used with other ingredients ?.
Yes you can but hope you know that the palm oil will be bleached
Palm oil is very expensive, please how to I go about it
Thanks for sharing, pls if I'm using only pko will i still get good result or will the measurement change?
You will also get a very good result
@@XelEntre ok thanks I'll try it and see.
Hi mum. How long does it take for the mixture to cure before cutting.
Give it 24 hours before cutting
Please i need all the soap kits to buy do you have it
No I don't sell soap kits thanks for stopping by
I sell chemicals in Accra
Thank you ma, more sales
What is the size of the mould
For the full of the mould,use eight litres of oil
But I will still send the measurement of the mould to you okay
Thanks for sharing. I'm from the Gambia. How can I order the ingredients
Thanks for being here truly I don't know how to send chemicals to Gambia except if you have any contact we can purchase chemicals and send through them
Can I a also add red oil?
yes, you can use red oil, but you will have bleach it.
Good day, please what if i use 50% palm oil and 50% pko. Can i still use 120% of water?
Use 100% water
Okay thanks
Sorry am asking too many questions.
What is the quantity of silicate used and the sls is it meant to the disolved in part of the water for the production or is it liquid Sls
Thank you.
400ml of silicate and dissolve 2% of your sls in little quantity of water or better still dissolve sls in water and keep prior to production okay
@@XelEntreplease ma the quantity of caustic soda u usea
pls after making my soap i note that they is enough seeds inside my soap, i use a day bleached palm oil and water touch my custic soda same yesterday,pls make is that the cause
Thanks you very much.
You are welcome
Thank you for sharing and please what is the size of this soap?
It's 4"X2"x1". Eight is 150g
What's about if you don't have thermometer?please what will you do?
If you don't have thermometer allow your caustic to clear after you poured it into water
For like 1 hour or 2 hours because I am experiencing some issues. my trace harden so fast. please, any advice?
Please i can't get Tallow oil here can i use only PKO for this process
You can use only pko but the percentage of water will be reduce to 80% because pko alone cannot contain much water in it otherwise the soap will be soft
Wow,thanks for this video it came at the right time you just gain a subscriber pls I look forward for more video God bless you I had very hard bars thanks so much
Thanks. Please look forward to more videos.
Please you omitted the quantity of silicate when writing your measurements, can you please help me with that please?
Good morning, measure 80g and dissolve in 160ml of water okay thanks for stopping by
Ma'am nice job and video but please can you help drop all measurements for this video in your description box🙏🙏
Pls kindly watch the video everything you need is there
Good afternoon ma,,pls how can I get d oil ? Is it where they sell the chemicals too
Yes you will get the oil where they sell chemicals
How did you dissolve your SLS?
I dissolved my sls in a little quantity of water and stirred give it like one hour to completely dissolve before I used it for production
Thanks mum please help me anytime I made soap I left it there for one or two weeks the body becomes like putting salt or sugar on it please help me to stop it
What you can do is to wrap your soap in a nylon after the soap must have finish curing for one week
@@XelEntre thank you but please what is nylon
pls ma my soap have seeds what will i do it to be smooth
Thanks for stopping by kindly place your soap on a very low heat and it will be fine
Please is there another name for calcium?
Calcium carbonate or you can use kaolin clay
Wow! I love this. It actually came at the right time. You got yourself a new subscriber 💃💃💃💃💃.
Pls. Can i get the quantity of water in liters 🙏🙏🙏
If you see 5800mls it means 5liters 800ml hope this answers your question.still stick to the channel we have alot coming up here
God bless you my sister
Amen
Good job but i can see any recipe in the description box
It's there please
Thank you for the video, but I don't think the addition of SLS is unnecessary increase in cost of production.
Thanks. SLS is a choice thing. It bring out the beauty of your bar
Please ma quantity of custic soda
I used 1600g of caustic soda in 4600ml of water okay
Your total oil in the video is 5840ml ( 5600ml plus 240ml) but your saying is 8 litres. Please which is correct, is it 8 litres or 5840ml of oil
I used 8000ml of oil that is 8 litres okay
70% pko and 30% tallow
Ma pls i ve soap i did using 3200L of oil(tallow and bpo 50 50) bt it thicken then i had to cook it bt its 3days nw yet it is nt dried so i jst left it in d mold. Pls ma i need help. I used 426g of caustic and water is 3tyms d caustic
Hello so sorry to hear that but first bleached palm oil and tallow are both hard oils okay so I would advice you use the combination of oils I have here because tallow is hard oil while pko is a soft oil
@@XelEntre i am asking for remedy pls there must be remedy
My soda soap that i make, did not add and its my first product and i use casium with sodaash ,and custic soda
Pls why did u use 120% in this recipe and use 100 % for hot process
Just want to show that you Can increase the water for more profit okay
Ma, measurement of the silicate
Use 400ml of silicate
@@XelEntre thanks
Pls is it light ash or dense ash
we use soda ash dense
Good morning ma please the cuther is the problem
Mam, how much Silicate we can add?
Thank you. You can add 400ml
Thanks!
Thank u
The pleasure is all mine,alot are still coming up on this channel
Cool
thanks
Wow I really enjoyed watching this video I will try it our and see the outcome I will come back to tell you my experience
Please the measurement of chemicals was not visible.
Please can you State them out here for me
Okay I will send it to you okay
Please ma...my soap did not get hard even at one week..what could be the problem
I'm sorry to hear about that. Please ensure you follow the instructions and especially the measurements. If there's any portion you didn't understand we'll, kindly reach out.
Ma'am pls measurements pls
Kindly watch the video to the end the whole measurements are there thanks
Measurements for all d ingredients
The measurements are in the description box
No measurement @@XelEntre
Is it cold or hot process
It is semi hot process
Maaa ,I learnt one can not make soap with caustic soda dissolve the same day
You can make your soap with caustic that you just soaked,the method is called semi hot process where the caustic solution cooks the soap while the one you ferment your caustic is used for cold process soap hope I have answered your question?thanks for stopping by
I love so much making soap but I don't make profit. I try once with tallow it smells very bad.
with this method you will surely make profit.
what is your cutting method?
I put on mold in silicone. Can it be done with pko and palme oil ? I speak French oh.
Yes
I am pakistani
Thanks for stopping by
Thank you so much ma'am for this video. Ma i have been doing cold process soap since but trying to do this semi hot process soap using your procedure, my soap is just watering and not able to thick
Please can i get your Whatsapp number. Thanks ma
Am so sorry to hear that your soap is watery but please ensure your calculations are right okay this procedure here is what I even use for my own productions so if you don't mind can you state the chemicals you used and the quantity for me to see also the quantity of water and oil okay