Mr. Beast, while I was a little sad that I didn't get to hear the soothing sounds of your sweet voice, my mind experienced a great rush of excitement from reading such wonderful descriptions on-screen. I thank you, sir, for your continued excellence and dedication to your craft. Because of you I'm able sleep a little bit better every night.
I would also like to know the same. from what i can tell, the 3rd row vehicles have a different right rear quarter trim panel. if you want to do this swap, it seems you would need to source that trim panel and the factory sub enclosure.
@@bboyin4food The enclosure is the same for both models, the only thing that is different is the trim but this is also assuming you already have the oem sub installed. this is just showing that they replaced the stock sub with a better aftermarket
What size bolt is required to mount the sub enclosure? Looks like maybe M8? Trying to get all my parts together before I take everything apart. Thanks.
VD 8 or Evl 6.5? Also what impedance is the subwoofer and did you decide to run a monoblock to her or just kept to the factory monoblock itself? Please tell me that you at least use 10 to 12 gauge ofc wire? I like the idea by the way. Crap I just realized your Provo Beast you have it covered!
Could you tell me the depth you have to work with with enclosure selection? I would love to do this setup but really would like to put a high end sub in the enclosure. I would like to get an idea before buying this enclosure. Thanks for any info you can provide.
The Skar was 3-15/16" top mount depth and still required us to trim the inside of the enclosure supports to fit it. its super tight, so i wouldn't do anything deeper than that unless you add an MDF or ABS plastic spacer to the sub.
Provo Beast Audio Installation sadly I couldn’t , I did everything you did . I’m just installing a subwoofer to my stock head unit. I installed my lp7-2 to the stock subwoofer but I get no sound out of my subwoofer. I connected everything properly . Should I tap into another speaker ??
Full video, and parts used are linked in the description of the video!
What speakers did you hook the lineout too... I need to know where to tap in to on a 2021 4runner limited 🤔
Thought about doing it. Now I'm not
Mr. Beast, while I was a little sad that I didn't get to hear the soothing sounds of your sweet voice, my mind experienced a great rush of excitement from reading such wonderful descriptions on-screen. I thank you, sir, for your continued excellence and dedication to your craft. Because of you I'm able sleep a little bit better every night.
um what?
@@enkrypt3d Doesn't get laid often
Seriously man, what’s the size of those 4 bolts to mount the sub enclosure???
Would the enclosure work for a 2011 4runner with 3rd row seating?
what is the depth where the subwoofer is placed?
Would you recommend this subwoofer or a jl audio 8w3v3-4?
Does this work for the 2 row TRD offroad back side panels? I noticed yours is different then mine. My 4runner has the side cubby along there.
I would also like to know the same. from what i can tell, the 3rd row vehicles have a different right rear quarter trim panel. if you want to do this swap, it seems you would need to source that trim panel and the factory sub enclosure.
@@bboyin4food The enclosure is the same for both models, the only thing that is different is the trim but this is also assuming you already have the oem sub installed. this is just showing that they replaced the stock sub with a better aftermarket
About to do this to my 2017 limited, is it worth upgrading the sub or just going with a different box altogether, thanks.
I would upgrade the sub
Can I buy a plug and play harness or a T harness to just add a subwoofer, a harness for a basic LOC?
Just depends on the trim level of your 4Runner. Base model you can use this: amzn.to/3fmS3W6
Can you do this with the newer rav4 ? 2019 and up
Sure, locate the factory JBL enclosure for your Rav4, and you can use the same techniques. We have a great rav4 video.
What size bolt is required to mount the sub enclosure? Looks like maybe M8? Trying to get all my parts together before I take everything apart. Thanks.
Did you ever find out? I need to know the size of those bolts too!
Damn that's a lot of work to install subs???
A little extra work goes a long way for a clean factory look but with great sound.
VD 8 or Evl 6.5? Also what impedance is the subwoofer and did you decide to run a monoblock to her or just kept to the factory monoblock itself? Please tell me that you at least use 10 to 12 gauge ofc wire? I like the idea by the way.
Crap I just realized your Provo Beast you have it covered!
14 gauge ofc would work even up to 800w rms
Where can I find this box?
We found ours on Ebay. You might also be able to source this at a local junkyard.
No sound dampening material added after removing everything...dang
We wish we could have. Not every owner follows our suggestions for the install
What’s the part number for the enclosure for a 2014 4runner?
Parts are now linked in the description of the video!
Could you tell me the depth you have to work with with enclosure selection? I would love to do this setup but really would like to put a high end sub in the enclosure. I would like to get an idea before buying this enclosure. Thanks for any info you can provide.
The Skar was 3-15/16" top mount depth and still required us to trim the inside of the enclosure supports to fit it. its super tight, so i wouldn't do anything deeper than that unless you add an MDF or ABS plastic spacer to the sub.
@@ProvoBeastAudio thank you.
What did you end up putting in? I want to put in a new amp and just upgrade the sub as well
@@ProvoBeastAudio In the description you mention you got that sub enclosure second hand…where could I find one?
@@damon323 eBay? Salvage Yard? Local classifieds?
What version Skar speaker did you use?
Parts are now linked in the description of the video!
This looks great. All you need to do is remove 52,000 screws and pull apart your entire interior. No thanks….lol
😂😂😂😂😂😂😂😂😂
It’s actually very easy if you know what you’re doing LOL
That’s why no one will remember your name 😢
Would it fit a 2015 sr5 ?
Yes
Where can I get the enclosure?
eBay, local junkyards, etc. We found ours on a local classified page.
What is the skar subwoofer model?
Skar Audio VD-8 D2
@@ProvoBeastAudio does this work on the stock oem unit?
@@nathanw5747 With an aftermarket amp and line out converter, yes.
Can anyone verify if this fits the 2022 models? Thanks!
Yep, should be just fine for 2022
Provo Utah?
Is there any other way I can tap into the factory subwoofer without having to remove all the panels ??
Unlikely...But if you find a way, let us know.
Provo Beast Audio Installation sadly I couldn’t , I did everything you did . I’m just installing a subwoofer to my stock head unit. I installed my lp7-2 to the stock subwoofer but I get no sound out of my subwoofer. I connected everything properly . Should I tap into another speaker ??
all that work to remove the cover over and not sound deaden or thermal insulate it... oye. lets vibrate bare metal everyone :)