The Camera system must have an internet connection in order to view on your mobile phone remotely. One alternative solution is a mobile hotspot from a cell carrier.
i connected the ethernet cable to my poe switch, but cant see the ip address on the ezcloud device management settings. could you help please? thank you
Hello, Do you have a PC connected to the same POE switch running EZTools? That will be the best route to find the IP address of the camera. Thats if the camera is Uniview as well.
Hey buddy I just got 8 unv cameras and a nvr from my office I rented out to a small nail salon. They moved out and left the cameras and nvr. Can I put these cameras at my other office I have in my area ?
As long as the NVR is on DHCP, you shouldn't have any issues moving the cameras. If it's not on DHCP, it'll have a static IP address and you may not be able to access it from your alternate location. Let us know if you run into any issues with this!
Dependson the camera! But if its from us, usually theres a whip that comes out of the camera with an RJ45 connection to connect your Cat5e / Cat6a line to.
It is very irritating that you can't dismount the cable that run into the camera for drawing the cables before you mount the camera. That way you wouldn't need to drill such large holes in the ceiling
is it possible to install the turret camera on a side of a wall?
Lets say i have 8 cameras do i have to buy both poe switch and nvr, so i can see them all from my phone/computer?
Helpful ❤
Hi good video man, Just a question, if I don't have wifi or wired network to connect the NVR can I still seeing the cameras in a mobile phone?
The Camera system must have an internet connection in order to view on your mobile phone remotely. One alternative solution is a mobile hotspot from a cell carrier.
Hello. I have just purchased 4 uniview 8mp cameras. Is cat 5e enough ? Do you know that?😊
Yes, Cat5e is perfect for CCTV setups. It's what we recommend 99% of the time.
i connected the ethernet cable to my poe switch, but cant see the ip address on the ezcloud device management settings. could you help please? thank you
Hello, Do you have a PC connected to the same POE switch running EZTools? That will be the best route to find the IP address of the camera. Thats if the camera is Uniview as well.
is it possible to run all cameras poe cables to a poe switch and then connecting a single poe cable from the switch to the nvr?
Absolutely!
@@NellysSecurity thanks 🍻
Do you have a cam to read car tags and face recognition at 175ft?
We do have a car tag camera. check it out th-cam.com/video/zPIQDs-LhvE/w-d-xo.html
How do you run electricity to it?
These IP cameras utilize POE or Power Over Ethernet.
Is the dome wifi
No, it is not.
how to connect network
We usually connect our IP cameras to a POE switch, then to a router for network connectivity.
Hey buddy I just got 8 unv cameras and a nvr from my office I rented out to a small nail salon. They moved out and left the cameras and nvr. Can I put these cameras at my other office I have in my area ?
As long as the NVR is on DHCP, you shouldn't have any issues moving the cameras. If it's not on DHCP, it'll have a static IP address and you may not be able to access it from your alternate location. Let us know if you run into any issues with this!
asking because I am not handy at all,,,,,ok, mounting yes straight forward but where does the actual wiring be connected from the camera
Dependson the camera! But if its from us, usually theres a whip that comes out of the camera with an RJ45 connection to connect your Cat5e / Cat6a line to.
It is very irritating that you can't dismount the cable that run into the camera for drawing the cables before you mount the camera. That way you wouldn't need to drill such large holes in the ceiling
How to change password
Is it me... or this guy looks like Ryan Ryder...?