Thanks for the review, man. It's nice to see the opinion of someone who's used the thing for longer than it took to unbox and run some water through it.
It is still holding on . I do believe it needs some o rings changed out. I found they are around $20 and pretty easy to replace. I dont have any regrets with buying this sprayer, with the exception that I smashed my finger this week when messing with the pump mechanism... but that was my fault for being an idiot lol
Your pump piston seal is leaking and needs replacing. You shouldn't have to constantly keep pumping the handle to maintain pressure. To verify, with the tank cap removed and looking into the tank at the bottom of the pump rod where it enters the pump housing. Slowly operate the pump handle and look for air bubbles escaping at that area. If you see them, your pump plunger piston seal is bad.
initially I disregarded you comment because of just how I normally use this sprayer. No pressure regulator and the direct stream so I could reach the eves of my house from the ground just no other way to keep the pressure at a max to get the distance. however your statements have stuck with me and I completely see where you are coming from and I want to say more people should be aware of how these seals and that this sprayer is serviceable. I pinned this comment to try and get that exposure, thanks for watching and the insight. great stuff!
Thanks for the review, man. It's nice to see the opinion of someone who's used the thing for longer than it took to unbox and run some water through it.
Thank you!
Lovely vid thank you
Thanks
6 minutes. You welcome
Would this be good for sealing a wood fence? Would the sealant chemicals/heat damage the spraying unit?
good review. is the sprayer still holding on?
It is still holding on . I do believe it needs some o rings changed out. I found they are around $20 and pretty easy to replace. I dont have any regrets with buying this sprayer, with the exception that I smashed my finger this week when messing with the pump mechanism... but that was my fault for being an idiot lol
Hi again, have you had to lubricate the o ring ? Can I use Vaseline ?? Thanks
Your pump piston seal is leaking and needs replacing. You shouldn't have to constantly keep pumping the handle to maintain pressure. To verify, with the tank cap removed and looking into the tank at the bottom of the pump rod where it enters the pump housing. Slowly operate the pump handle and look for air bubbles escaping at that area. If you see them, your pump plunger piston seal is bad.
initially I disregarded you comment because of just how I normally use this sprayer. No pressure regulator and the direct stream so I could reach the eves of my house from the ground just no other way to keep the pressure at a max to get the distance. however your statements have stuck with me and I completely see where you are coming from and I want to say more people should be aware of how these seals and that this sprayer is serviceable. I pinned this comment to try and get that exposure, thanks for watching and the insight. great stuff!
Can I paint my fence with it?
That’s what I am talking about?
I think you could run a stain through this, I doubt you could use paint. I don’t think your spray pattern would be consistent enough for paint