great tutorial .will you please tell me how to draw a straight pipe through this spiral pipe and connect this spiral pipe with this straight pipe??Thank you.
Hello Sir Thanks for the tutorial Can you share the specs of your system or can guide us about cfd hardware. I'm going to build i9 10900k 10C/20T, 3.7-5.3 GHz. Will, it works fine?
thank you for this tutorial, sir can u do heat transfer between curved pipe wall to aluminum epoxy wall with CFX?! if u do that I will appreciate that so much sir
Hi ! Is it possible to do solid-liquid flow or solid-liquid slurry kinds of flow in fluent? Because one of my friends said that we can only work with DPM AND Particle tracking, the current models in Fluent cannot easily simulate macro-solid slurry. Is this true?
we are providing the detailed description and procedure in the video by help of text inputs .If have any doubt in any video then please feel free to ask any doubt or help. and thank you for the suggestion we will try to improve it in future.
Hey, I have been trying to do the same as shown in tutorial but at 15:30 min when I tried to display my pipewall, the design always vanishes from the screen every time and can't be located in the screen. Please help me with this problem
Ok, leave it. Its not necessary, i have created it in the tutorial just to show how fluent solves during iterations. You can get the results for the problem without this.
Okay but there must be some solution to it. Can I have your mail Id for any further communications with a snapshot of my problem as I cannot post any pic here.
Grateful
Thanks
Thank you for the tutorial it’s really helpful
Thanks🙂🙂🙂
Hi, can you please tell me how to display the centerline curve inside the helical coil?
Can you resend this video, because I need this video please, Because this video is only 2 minutes long😓
It was an error from TH-cam, the issue has been resolved please check now.
Thank you very much❤
great tutorial .will you please tell me how to draw a straight pipe through this spiral pipe and connect this spiral pipe with this straight pipe??Thank you.
Use the loft option that might help you
Hello Sir Thanks for the tutorial
Can you share the specs of your system or can guide us about cfd hardware.
I'm going to build i9 10900k 10C/20T, 3.7-5.3 GHz.
Will, it works fine?
Yes, it would work fine. My system configuration is lesser than yours.
My graph is not converging and it's going parallel in range to 10e-4 if I am doing upto 1000 iteration also
It's OK, if the iteration vs residual plot is going parallel. You can now proceed for the results.
hi .. please can you insert circular fin around the helical tube? and how can i repeat this fin along the helical coil?
yes it can be inserted but the meshing will be much difficult.
@@AnsysTutor can you do a video about it for me please
so helpful, thank you a looooooooooooooooote
Thank you for your comment.
nice video... why does velocity at outlet become zero ?
Due to large pressure drop in the helical pipe.
thank you for this tutorial, sir can u do heat transfer between curved pipe wall to aluminum epoxy wall with CFX?! if u do that I will appreciate that so much sir
wiil try to do a tutorial on this in CFX
hi! if possible can you do a tutorial on a solid-liquid flow or solid-liquid slurry flowin a simple pipe?
Will try to do it soon.
thanks:)
Hi ! Is it possible to do solid-liquid flow or solid-liquid slurry kinds of flow in fluent?
Because one of my friends said that we can only work with DPM AND Particle tracking, the current models in Fluent cannot easily simulate macro-solid slurry. Is this true?
Good tutorial.. it will be better if sound available
we are providing the detailed description and procedure in the video by help of text inputs .If have any doubt in any video then please feel free to ask any doubt or help. and thank you for the suggestion we will try to improve it in future.
Which software did u use in creating the helical pipe geometry? Ansys or Solidworks?
Hi.please go through the tutorial, u can able to create the geometry in ANSYS design modeler itself.
What is the function of the shell conduction layer?
shell conduction layer creates the materials virtually and calculates for that.
Hey, I have been trying to do the same as shown in tutorial but at 15:30 min when I tried to display my pipewall, the design always vanishes from the screen every time and can't be located in the screen. Please help me with this problem
Try to use "fit to screen option" .You can find this icon in a cube inside a magnifier icon,near zoom,drag icons.
I have tried the option but still nothing happens. Everything else is going fine as calculations, iterations etc. Any other thing that I can try?
Ok, leave it. Its not necessary, i have created it in the tutorial just to show how fluent solves during iterations. You can get the results for the problem without this.
Okay but there must be some solution to it. Can I have your mail Id for any further communications with a snapshot of my problem as I cannot post any pic here.
Thanks for your awesome tutorials. I have learnt a lot from them.
How to analyse wen geometry is imported having 3 starts for fluid flow
3 starts means 3 inlets?
@@AnsysTutor hmmm. It is swirled nozzle having 3 starts for fluid flow
yes you can do this, just create the profile and sweep along the line.
@@AnsysTutor tq. I ll try