As all our EMPUR distributors have a flow rate indicator, we only explain the procedure for this version in our video. There are certainly other instruction films available on TH-cam for your specific application.
Is there a way to stop the pipes from heating a room from this valves? The electric y controllers on my flat don’t work, and there’s a room that doesn’t need to be heated and I don’t know how to stop it manually:(
Since we do not know your heating system and there are several ways to manually switch off a heating circuit, you should ask your specialised craftsman to do the work. In general, it is possible to switch off a heating circuit.
As the qualified person said you should contact the/or a correct company but in my experience I had the hallway and a small bathroom with manual (blue caps) I screwed these down to stopbthe flow. My personal reason being the fudge monkeys that put the system in ran room feeds the same way so there was always heated water running through these areas.
![SAFEPLANET - ดาวเคราะห์ [ THE PLANET ]](http://i.ytimg.com/vi/4X1XL3I_k3c/mqdefault.jpg)
What if you have an older manifold system that does not have the flow gauges on it?
As all our EMPUR distributors have a flow rate indicator, we only explain the procedure for this version in our video. There are certainly other instruction films available on TH-cam for your specific application.
Is there a way to stop the pipes from heating a room from this valves? The electric y controllers on my flat don’t work, and there’s a room that doesn’t need to be heated and I don’t know how to stop it manually:(
Since we do not know your heating system and there are several ways to manually switch off a heating circuit, you should ask your specialised craftsman to do the work. In general, it is possible to switch off a heating circuit.
As the qualified person said you should contact the/or a correct company but in my experience I had the hallway and a small bathroom with manual (blue caps) I screwed these down to stopbthe flow. My personal reason being the fudge monkeys that put the system in ran room feeds the same way so there was always heated water running through these areas.
If you know which circuit then just close the valves like he did in the video for the circuit that runs under your particular room