ฝัง
- เผยแพร่เมื่อ 12 ต.ค. 2018
- You can easily convert your Nitro RC car to powerful Brushless 4 pole motor.
See below necessary parts:
www.aliexpress.com/item/1-8-r...
www.aliexpress.com/item/Origi...
www.aliexpress.com/item/MOSEW...
www.aliexpress.com/item/Hobby...
www.aliexpress.com/item/Hot-i...
Thanks for watching DIY fun - แนวปฏิบัติและการใช้ชีวิต
Thanks for sharing your DIY video. Going brushless with my Inferno GT2 nitro. I was afraid Kyosho conversion parts were discontinued, but your video helped me understand what is actually needed. Thank you!
Thanks for you feedback. Please share and subscribe
The parts from kyosho are discontinued but still available
@@johan-henrik Thank you. I’d better buy more than one kit. 🤔👍
Cool conversion my bro
Un genio bravo💪
Nice vid
Hi, your video inspired me to convert HSP 1/10 nitro Truck into Electric (Brushed)
but I didnt get proper pinion gear for existing supra gear, and facing little Gap between them
due to this my brushed motor is getting heat up
Love the video, I'm about to do the same to my old inferno. Just curious, I saw you cut off the throttle servo, on the infernos that also activates the brakes, how do you break?
motor do
also the brake and reverse
@@theogeo1258 of course! That's brilliant.
The motor does all the breaking it’s a drag break or initial break when you tube
Work in Kyosho MFR Monster truck 1:10???? 2 speed.. could I install and not remove one speed?
Have a DX with no center diff. What do you think is compatible in order to replace
I like it 🙂
Just watched you video, I’m looking at converting my old HPI MT2 nitro into brushless motor for my kids. Quick question, what motor would I need and would a new speed controller work with my existing hand controller?
€ 56,34 30%OFF | Original GoolRC S3670 2850KV Sensorless Brushless Motor 120A Brushless ESC and Program Card Combo Set for 1/8 RC Car Truck
a.aliexpress.com/_mq5Oqmt
Ah so the same one you used? That’s great thank you, will my radio gear work with the new esc?
Will the motor mount fit a hobao 7 tq buggy 1/8??????
maybe but you will have some modifications to fit it
Hi mate do you know what tooth and pitch the pinion gear is you used in that kit I'm doing a conversion now but I've made my own mount I just need a pinion haha
copy what ever the nitro engine had on it
What kind of spur gear setup was that I tried to click on the link but it says no longer available
18T
Hi Nice to see you busy at work, just wanted to know if these parts would fit hyper vs nitro 1/8 thanks.
Yes
@@theogeo1258 great I’m doing this to my hyper 7 just need a battery tray
Did u use both parts of motor kit bracket are the holes a standard 16mm bearing fit I have taken measurements and find it will lift my axel shafts up by 5mm emailed Chinese no reply it was the bearing slots I wanted know about
Yes , it was 16mm
There is a bent front shock tower :). (I think)
Do you have part number on motor mount
What did you use for the center differential gear mine is a 2 speed
2 speed Kyosho
i watched again your vidéo and i saw a wedge on the center differential housing.
What did you do with your nitro parts? I’ll take them as spare parts! Thanks
I use them in to other project.
Come si puo aqustare la staffa adattatore del motore perché non riesco a trovarlo su internet grazie.
Is this a Kyosho, what model? will this motor mount fit an inferno GT?
Yes it fit
how much is the size of the big sur gear and the small one, sir
where do you buy your brushless motor mount? can you give me link. thanks
i'm sorry i didn't see your links, thanks
from ali express
How many KV is this motor and how much KV is enough to pull it up to 30-40 km plzzzz answer quick
What is the gear pitch?
M1
You just only buy kyosho inferno VE parts (motor mount,battery tray and receiver box)
the conversion Kit Kyosho is very expensive
We're did batteries go
€ 56,34 30%OFF | Original GoolRC S3670 2850KV Sensorless Brushless Motor 120A Brushless ESC and Program Card Combo Set for 1/8 RC Car Truck
a.aliexpress.com/_mq5Oqmt
I just mount my battery to the chassis in front of the esc...cable ties..or velcro
press between the chassis and plastic skirt....
I run mine on 4076 2250KV 120A esc. 4s 50C 5000mah...18T pinon on whatever comes
with the buggies...they do around 50MPH...wear out the tires super fast on pavement.lol
They;re like dirt devils in a dirt lot.lol
send me your email to send you amazing video
@@theogeo1258 I like your paint job...it works for me,
You can race with your's...that;s that biggest size motor they allow
for in doors...Just up load it to YT.
It's not easy to make videos while driving and get all the different angles.
You;re having fun with it??? That's the most important.
How fast you get vs nitro? Please
90km/6sec
@@theogeo1258 That's more than plenty fast. You basically have a $400 toy. now.
How are you proposing to but a lipo on this😂
what i the top speed?
40-50km
Pinyon t ?
18T
The “like and subscribe” that keeps popping up is annoying
سلام