hi a question bro do you have a tutorial when u simulate a car in movement with some load in the roof to see what is the force that act in there. is posible to make that kind of simulation on inventor or solidwork?
I use solidworks 2017 professional and I dont have the option of adding in Solidworks motion. Its greyed out and wont let me enable it. How to fix this?
I have a big problem during the motion analysis, my ball go through my parts, do you know how to solve this problem ? And I'm sure that I selected the correct options as gravity and contacts ... It's really irritating
CAD CAM TUTORIAL no, it literally go THROUGH my part. But I forgot to mention that it doesn't happen with your parts, it happens with mine, do you know why? Because my parts seem normal, and same as yours
Good day to CAD CAM TUTORIAL, i have a problem regarding about the import motion load. I have a shaft with a flywheel to rotate about 10 rpm in 30 s. The motion analysis runs smoothly, however, when i tried to import the loads into static to see the deflection and inputted bearing fixture (rigid) onto the split lines i had created, the transferred remote load appeared to be malfunctioned, and solid work gave out message saying that " One load/fixture/connector/contact is invalid". I had turned off the inertia relief and it still didint run smoothly with fixture on and no change in remote loads. Sadly, I tried test with Bearing Fixture, Roller/Slider Fixture, Cylindrical fixtures to mimic the bearing support during rotational motion, all failed and deformed drastically. May i know how to handle the remote load definition imported from the motion load when we had inputted the fixture or how i should input my fixture correctly? Thankyou.
Hello, good day, I have a problem with my motion analysis, I have an assembly that needs to apply engine torque, but I cannot get a correct result. I'm using Solidworks 2017. can you help me?
When the analysis that you are doing requires Premium to complete, I would appreciate it if you could put a notice on the screen and/or say something about that requirement before I spend the time to watch nearly to the end to find out that I can't do it. Irritating.
Thanks! wonderful SOLIDWORKS instructing videos! 😎
Really very much useful sir and I am expecting a lot about motion tutorials
Thank you very much for your very educational videos.
thanks again
Thank you sir, the tutorial was of great help!!!
welcome, please share our videos which is help us to do more and more in Solidworks thanks,
Thank you so much Sir for good explain.
Awesome tutorial! Thanks friend
what scene/background you are used ? Amazing visual
Excellent tutorial. Thank you very much
hi a question bro do you have a tutorial when u simulate a car in movement with some load in the roof to see what is the force that act in there. is posible to make that kind of simulation on inventor or solidwork?
I use solidworks 2017 professional and I dont have the option of adding in Solidworks motion. Its greyed out and wont let me enable it. How to fix this?
thank you so much sir
Good content sir.
hello I already make a physical pendulum and now I need it to move, can you help me ?
thanks!
That was awesome sir thank you so much 🙏😊
very good job! thanks for solving my doubts
Thank you.
Well explained, thank you !
Sir can you please tell me ....my solidworks motion is not showing up in add ins option ...plz resolve my issue .
Done .good explanation .but my ball going through the bawl and falls down.
change gravity value
@@fishing96 not working still going down
Very helpful 👌
Superb.
Sir,can you make video on animation tutorial videos for zero of animations plz
I have a big problem during the motion analysis, my ball go through my parts, do you know how to solve this problem ?
And I'm sure that I selected the correct options as gravity and contacts ... It's really irritating
keep the bowl close to the body,
CAD CAM TUTORIAL no, it literally go THROUGH my part. But I forgot to mention that it doesn't happen with your parts, it happens with mine, do you know why? Because my parts seem normal, and same as yours
you can use contact option in motion study toolbar
gooood Thankks
How does the slide not fall over if only the bowl is fixed?
Good day to CAD CAM TUTORIAL, i have a problem regarding about the import motion load. I have a shaft with a flywheel to rotate about 10 rpm in 30 s. The motion analysis runs smoothly, however, when i tried to import the loads into static to see the deflection and inputted bearing fixture (rigid) onto the split lines i had created, the transferred remote load appeared to be malfunctioned, and solid work gave out message saying that " One load/fixture/connector/contact is invalid". I had turned off the inertia relief and it still didint run smoothly with fixture on and no change in remote loads. Sadly, I tried test with Bearing Fixture, Roller/Slider Fixture, Cylindrical fixtures to mimic the bearing support during rotational motion, all failed and deformed drastically. May i know how to handle the remote load definition imported from the motion load when we had inputted the fixture or how i should input my fixture correctly? Thankyou.
Can you do tutorial on surfacing basics
Ok i will prepare tutorials for surface commands.
We got it boss. Thank you
i enjoyed
excellent ....thanks
thanks for watching.
thanks sir
I have a big problem sir my ball is going to through my parts during motion analysis.pls help me
Take hammer and click on both of your hanging ball
Hi Sir, can the same be done in Autodesk inventor?
대박!!
Thank you so much !!
To join the membership.
Can I do it with PayPal or No?
its not coming motion analysis option what should i do??
How to give constant
Sir what are your pc specifications ??
Can I do this using a academic version ? cheers
yes you can do it with academic version,
I tried but I couldn't make it
Thanks
good
Thanks,
Thank you! Can you tell me your PC parameters?
Dell Precision M4800
Processor : Intel(R) Core(TM) i7-4810MQ up to 3.6 GHz
RAM : 16 GB
Graphics : Nvidia Quadro K1100 2GB
Hard Disk : 500 GB HSSD
Sir can we do it with assemblies instead of parts ?
yes we can create all the parts in Assembly section & possible to do animations,
Is there a reason why my ball falls through the slide completely?
gravity value
what do i need to do to acchieve that ambient reflection on your items, (ball)etc.?
you need professional graphics card like nvidia quadro series or AMD firepro for real view or shining view.
Sir my sprial shute size outer dia 90 inch
Iner dia 10 inch pipe
Pitch 96 inch
Hight 68 ft
So please help me how iam marking thanks
Sir please give me the download link of this project
Sir my mazor problem... Apke colour me kon se brightness hoti h steel ki tarah shining hoti h.. mere solidwork 2019 hai fir v aisa colour nhi ho pata
BRO U NEED REALVIEW COMPATIBLE WITH NVIDIA QUADRO PRO GRAPHICS, if u have geforce graphics there is a easy work around for that
@@railgun1935 thank you , bro
Sir give me this project's download link.
Sir please
Sir the balls stops in the middle on the slider
Hello, good day, I have a problem with my motion analysis, I have an assembly that needs to apply engine torque, but I cannot get a correct result. I'm using Solidworks 2017. can you help me?
"first part of our MEKANizm"
NX Motion
sar hin oda motoris
kaj salas naker ?
When the analysis that you are doing requires Premium to complete, I would appreciate it if you could put a notice on the screen and/or say something about that requirement before I spend the time to watch nearly to the end to find out that I can't do it. Irritating.
thanks