Smart WiFi Controlled Door Lock system using ESP32
ฝัง
- เผยแพร่เมื่อ 16 ก.ค. 2021
- Smart WiFi Controlled Door Lock system using ESP32
Visit My Website to Download Code and Circuit Diagram:
creativepradeepthehomeofelect...
For New Code:
drive.google.com/file/d/1fLs4... - วิทยาศาสตร์และเทคโนโลยี
solenoids are a vulnerability in locks as it can be activated using a large enough magnet but nice project
gOOD WORK
Hi, if I have a NodeMCU ESP8266, the voltage to make this work is 3.3V and maximum is 3.6V. will i still be able to connect the Vcc of the Relay to the 3.3V pin on the Node?? I can see in your video you are using a NodeMCU ESP32 which can withstand a voltage of 5V
Yes you can connect to relay to 3.3v
Can i use a stepper motor instead of solenoid lock with the same code that you have used
Can i change the battery to 12v adapter then the positive connect to esp32 vin?should be able to use it or not?
Yes u can
Hello, i couldnt find the circuit diagram
is it possible to trigger the system by a rest api?
when we make mobile applications for control esp 32. how we connect each other
Hi, i'm using esp8266, where the relay data pin plugged? And can you give me the esp8266 code?
Can I use sensor and not the battery
but how are we gonna do the blynk settings
do you have working simulation for it?
Is it ok to use 12v 7ampire battery for this? Will the circuit short due to 7ampires ?
No nothing will happen you can use
IF THE SOLENOID LOCK HAS 12V , THE BATTERY SHOULD BE IN 12V TOO? ALSO, THE ESP8266 RELAY I HAVE ONLY HAVE 5V, RX, TX, GND. NO VCC AND IN. HOW WILL I CONNECT THAT TO ESP32
Use a buck converter and set the voltage to 5v and then give it to esp32
@@CreativePradeep I am just going to buy the relay module you used in the video. Can you tell me the details about that relay module? So that I won't buy the wrong 5V relay module. Thank youu
can i use breadboard
what is the recommended 12v voltage and how many amperes do you recommend?
Use 12v 2a adapter or use 12v 2a battery
le fichier nest plus disponible ...a tu le code &
Sir are the pin numbers given in the code same as the connection done in the video .
Yes
Is data management possible in this project? For example, the phone will also detect the time the lock opens and closes?.
Yes u can
@@CreativePradeepHi! Can you make a tutorial about that? The detected time and date will be recorded in excel? And Can you teach how did you connect the phone to the door lock? I really don't know how the phone control the door lock
@@CreativePradeep please 🥺❤️
Was this done on the blynk app? Also I have a ESP8266. Will the code still work on that controller or will it need to be adjusted?
Yes the code will works fine you have to connect a relay module to esp8266 then it will work
@@CreativePradeep yes I also have a relay module aswell, thank you.
@@CreativePradeep I would also like to make a change with the code, I want the lock to be able to unlock when the power goes out so there’s a type of fail safe option. Would I be able to just add that code in anywhere or would I need to delete code and attach it in and write the code round that function?
What are these yellow things??
Can i know battery ampire level, that we should use here
Minimum 12v 2amp
How to setting button pin in BLYNK ?
I copied your work, but it is not working? when i click on the blynk switch, the color blue in esp32 blinks
Then connect the relay pin to d4
hello i want to ask,what if i want to implement password security to this project,can you explained how to do that?
You can do using Arduino video is there in my channel
Does it use the arduino ide app to enter the code?
Yes
@@CreativePradeep Thank You!
is it normal for the solenoid to get hot?
Yes
tutorial on blynk app?
mas kenapa pake relay?
Is it ok to use 12V 27A battery ?
No don't use that battery it will burn the solenoid
Hi. May i get this code? I have been check that drive was deleted
Now new code is given in description go and see
@@CreativePradeep thank you so much
Your welcome please subscribe to my channel
can u show how to use that blynk
So now blynk is not available blynk iot is now available in playstore so wait I will make a video on it soon
hey can u upload code on your site becouse it was deleted
Now the new code is given in description
What app want to download on android
Blynk app
Do u have circuit diagram?
Hey bro i really need your help
Hey bro i need your help
Sir code is error
Please I want code
Tutorial for code
Where we need to do the coding?
Using arduino droid you have to upload code to esp32 code is given in description
@@CreativePradeep What's that black holder like component in which you put the ESP32?...
It is header pins I have solder it on a vero board that it's self you can connect it directly with jumper wires
@@CreativePradeep Ok thanks.... We can connect it without vero board or breadboard.....?
Yes by using jumper wires
There's an error on code and setting up on things can you help and and teach me also where do i contact you?
Hi, where you able to get rid of the error and successfully run it?
@@nami7305Are you gonna do this?
Bro the app is updated how to connect
Yes bro please see another video of using new version app you can make homeautomation code to this project or else wait for a week I will upload new video of that one
Bro how can i contact you..its very urgent
Do you have email? I want to ask questions.
sir a fatal error occurred using esp32 occurs aisa aa rha ha 😔😔😳😳
and sir 26 ko submission ha so sir agar aap help kar sakta ho kya plzzz
agar aapka whatsApp no rehaga toh aap mujhe bata dijiye plzz😖😖
Then contact me at 9620838243 on whatsapp
@@CreativePradeep sir. Kl submission hai and. Code me zig file upload nhi hora