Currently in the process of restoring / restomodding a Bburago Testarossa & Countach. Got a lot of inspiration from your videos, thank you. Loved many aspects of this build and I love that you block out the leds like I planned to, nice to see it done. Blocked in rear view mirror of the Countach silver first then black on top and it looks amazing for how little work it took just masked the mirror side.
Been lookin to get into tho can you list all the stuff you used like the tool you made into the front splitter and the putty you used also thanks you 😊
Hi, many thanks 👍 I don't remove the old paint before primer. I only grind the old paint before primer and top coat. On old Maisto and Bburago there are big gaps between the doors or hood, they are smaller after more layers of new paint over the old. It looks better, less work an i had never problems doing it in that way. I would not recommend to overpaint Autoart or Kyosho, because they have with original paint too small gaps, it would be a problem with opening parts.
Hi, thanks for the positive feedback. Best way to find spare parts is ebay or local market with used stuff. If you need only parts, look for a used or model in bad condition. I know in germany is a guy selling spare parts, but shipping is very expensive
Hi quick question how did u put these wheels on like did u cut some of the axel of or did u glue the wheels because i have exact same model and bbs from SD model and they dont fit and stay on the car
Hi, i cut a little bit off from the axle to make sure, that the wheel fits perfectly with the fender. Than i glue it with fast hardening 2K epoxy glue. You can also do rolling wheels, look my Bburago Ferrari 288GTO Video to see how it works
Looking great! I’m building the same model. However I’m respraying mine in Imola with camel/black interior. Quick question though, did you get you wheels from sdmodeling? I’m looking for tires for my 3 piece OZ futuras I printed. So I’m curious if yours are the 15” versions. Thanks for any insight.
Hi, yes that are SD wheels, but not the 15" they are way too small for the E36. I think that are the 19" version. Good luck for your build and thanks for the comment 🙂👍
Excelente trabalho, tenho uma BMW como a sua, mas na cor Vermelho, vou dar um upgrade na minha, ela apresenta porosidade na pintura, enfim, quero deixar novo de novo.
Many thanks 🙂 👍 i use black velvet powder for the carpet. First i use black paint, paint thick and wet layer, before it dry, sprinkle the velvet powder over it
Looking great! I think how you lowered the suspension with the washers is a great idea!
Many thanks 😊👍Regarding the Suspension, you can do lowering with washer disc on every Maisto model. Fast and easy 🙂
Super super super
Crazy how good the interior looks with the LED lights too, great job!!!
Currently in the process of restoring / restomodding a Bburago Testarossa & Countach. Got a lot of inspiration from your videos, thank you. Loved many aspects of this build and I love that you block out the leds like I planned to, nice to see it done. Blocked in rear view mirror of the Countach silver first then black on top and it looks amazing for how little work it took just masked the mirror side.
I'm happy to inspire people with my videos. Many thanks for your feedback 👍 👍
It is so perfect that any other improvement would be superfluous.
Great job! 💯
Many thanks!
Fantastic end result. Love the BMW colors in the grille area.
tolle arbeit und super ergebnis. hab auch noch 3 stück von den e36 cabrios bei mir in der werkstatt stehen. einer ist bereits fertig.
Besten Dank, die E36 von Maisto sind top Modelle für umbauten 😊👍
omfg that thing is amazing i love it so much !!!
Stunning!!
Looks so much better than before. Great job my friend!
Thank you! Cheers! 🙂👍
Travail respecter dans l'art ultra détaillé félicitations
Many thanks Alain 😊
@@jaysmodelcarcollection8338 de rien j'adore regarder vos vidéos
Magnificent !!!!!!!!!!!!!
That is really impressive!
Gorgeous Custom restoration ! Love so much
wonderful, nice, amazing restoration!!! wow!!!!!! Greetings form Brasil!!
Many Thanks 😊
Magnifique customisation bravo monsieur
Thank you 😊
Enhorabuena,es un trabajo excelente
Many thanks 🙂👍
Been lookin to get into tho can you list all the stuff you used like the tool you made into the front splitter and the putty you used also thanks you 😊
Hi, i have used following stuff:
Knife or cutter
Evergreen Polystyrol Sheet 0,4mm
Vallejo Plastic Putty
2K Epoxy Glue (or other good glue)
Excelente modificación
Great work what do you use to remove the paint? before priming
Hi, many thanks 👍 I don't remove the old paint before primer. I only grind the old paint before primer and top coat. On old Maisto and Bburago there are big gaps between the doors or hood, they are smaller after more layers of new paint over the old. It looks better, less work an i had never problems doing it in that way. I would not recommend to overpaint Autoart or Kyosho, because they have with original paint too small gaps, it would be a problem with opening parts.
You have done a Great job 👏👏 I have exact the same model but it's broken and parts are missing do you know where i can get spare parts?
Hi, thanks for the positive feedback. Best way to find spare parts is ebay or local market with used stuff. If you need only parts, look for a used or model in bad condition. I know in germany is a guy selling spare parts, but shipping is very expensive
@@jaysmodelcarcollection8338 Thanks☺
I have the same, need to do this too
😊👍👍
Nice! How did you make the backlit speedometer and the vent buttons?
I drilled small holes where there were buttons. Filled it with liquid glue and attached an LED. You can see at 4:25
Hello m8 awesome job! Question! Do you sand your primer down before painting? If so what sand paper do you use for that?
Many Thanks. Yes, i do sand the primer to ensure a smooth paint surface. I use 1500 grain
Fantastic work! Super impressive. Where did you find the replacement BMW decals?
Many thanks, i print the decals myself.
Nice modell !! Would have been better if it was the working top version
I know, but they are very hard to find. Especially with a roof in good condition.
what was the putty you used for the front spoiler?.... GREAT WORK!
Many thanks 🙂 👍 i use vallejo plastic putty
Hi quick question how did u put these wheels on like did u cut some of the axel of or did u glue the wheels because i have exact same model and bbs from SD model and they dont fit and stay on the car
Hi, i cut a little bit off from the axle to make sure, that the wheel fits perfectly with the fender. Than i glue it with fast hardening 2K epoxy glue. You can also do rolling wheels, look my Bburago Ferrari 288GTO Video to see how it works
@@jaysmodelcarcollection8338 TYSM
This is and amazing job. My Q. Is where you got wheels honestly where you got it
Many thanks 🙂 👍 The Wheels are from SD Modelcars, they have different type of Wheels
Looking great! I’m building the same model. However I’m respraying mine in Imola with camel/black interior. Quick question though, did you get you wheels from sdmodeling? I’m looking for tires for my 3 piece OZ futuras I printed. So I’m curious if yours are the 15” versions. Thanks for any insight.
Hi, yes that are SD wheels, but not the 15" they are way too small for the E36. I think that are the 19" version. Good luck for your build and thanks for the comment 🙂👍
These look like scaled 17''s BBS RM's to me btw awesome build 👍
Excelente trabalho, tenho uma BMW como a sua, mas na cor Vermelho, vou dar um upgrade na minha, ela apresenta porosidade na pintura, enfim, quero deixar novo de novo.
Many thanks for the comment. The Maisto E36 is perfekt for modification 😊👍
Awesome! How do you make carpet effect on the floor? What do you use for it? Thanks!
Many thanks 🙂 👍 i use black velvet powder for the carpet. First i use black paint, paint thick and wet layer, before it dry, sprinkle the velvet powder over it
凄い。魔法にしか見えない😅
Hello! Good job, it looks amazing! Can you tell me please what did you used to paint the front grille? Thank you!
Hi, many thanks. I use Revell Aqua paint
@@jaysmodelcarcollection8338 thank you very much!
Great ❤ my favorite
Sensacional!!😊
Nice, nice work…!!!where do you buy the rims??
The Rims are from SD Modelcar
Thanks sir!!
Hello, what do you use to make carpet imitations? The car looks amazing!
Many thanks 🙂 👍 I have used black velvet powder for the carpet
Amazing build. Where did you get the rims from??
Many thanks 🙂 👍 that are rims from SD
How did u do the carpet
Hi, i have used velvet powder for the carpet
Tolle Arbeit. Womit füllst du den palt am Frontspoiler?
Hi, thanks 🙂👍 Valeo Plastic Putty
Where do I get the led's from and what kind of plastic processing is it for the lip?
Hi, led are from Amazon and for the lip a have used Polystyrol (Evergreen)
hello, where did you buy the BBS's ? TY
Hi, i have buyed the BBS wheels at Ebay
Whats dimension this led? 402 , 602?
I have used 0603 SMD LED
how many hours did you use on this project?
Hi, it take a month or two to do such a project. When i do a project car, i work every evening about 2 hours
superbe
Where do you get the wheels?
Hi, i have used SD Modelcar Wheel set. I don't know if they can be buyed outside europe
😍😍😍👌👌👏👏
Not bad.
Je fais aussi des restoration de voiture. J’en ai 16
👍👌👏👏👏
My god this ‘music’ is so bloody irritating 😠
Where did you get the wheels
I get them from Ebay, SD Modelcars