When I demo the ZXT the frist thing noticed is discharged of glass clippings blew my mine. The horsepower come with the one you have has been my favorite thing about the mower . We them ninjas. hope family is well and keep up the hard work . #wapcha
if your dealer sends you some new screws for that placd, get yourself some Re Loc-tight and put it on the screws before you put them in.. Just put very little on them and it wont rattle out.
I started using Amsoil for air cooled engines because of the zinc content. I researched information concerning this extensively, and decided to try it. Can’t do any harm. Supposed to run cooler, based on actual controlled conditions in lab.
personally I would never run a new engine much more then 10hors before an oil change. 500 on new vehicle. as that's when you get the most wear from the engine break in. Wrights are super nice mower I'm running the ZXL.
Nick I recommended those Ballard ultra high lift blades to put on your ZK if you put them on there it will shoot grass just as far as your new mower... Or at least very close
Great click bait with your title! I'm about to buy this mower. I'm demoing one this weekend. Think it's a 2022 model. I can't believe how fast it is! I'm selling my 2004 Toro commercial zero turn.
I bought one of wrights first sit down z after running their standers and loving them for years but unfortunately it was a lemon and it really turned me off on their sit downs but they have stepped their game up on the sit downs.
Hey nick, have you had a look at some Kavli blades for your mower. They are a Australian business and they do export to the USA. It would be great to see a review on them. There located in knoxfield Victoria Australia.
I replaced a 23 horse Kohler with a 28 horse Briggs 810 efi. It been trouble free for the last 3 years and the power is amazing. Oh and it uses about 1/3 less fuel than the Kohler did.
Take in to factor the grass. Dry or wet. Height. (Throttle ) this looks ordinary to me. I haven’t sat on a brand new mower in a while. Just sharp blades and main rain it but. Double cuts basically gets rid of any bagging issues because of how far the mower disperses the grass
Get the front tweels, trust me it will make just as big of a difference and ride quality as the rear, I actually think it makes a bigger difference to have them in the front than the back. The ride quality is much improved
I think they’re only like 10 pounds lighter per wheel, you you know twheels are heavy. I haven’t had any issues with the front coming up, I have a toro Z master. These are heavy mowers, they don’t rely on the front wheels to keep them down. A lot of front casters are air still and are lighter than the tweels.
@@michaelgutter2004 I have them on the front of my Spartan stander with the front suspension but radials in the back. It is amazing only problem is it's super wet ground the tweels can tear up the Grass but normal conditions they are amazing. I thought I was the only one that likes front tweels lol.
Don't know where u are?but in East Tennessee its dry .custamers not wanting it cut.leaves brown tire marks.it's so dry .baD.like captain, crunch, was like this in st.louis. 12 years ago..
Can’t stand the stand ups. Us kacy guys like to sit back out a leg up listen to music and relax lol. Some nice look sing wheels. What’s the deal with those ? Used to exmarks and Toros
My first wright is a Stander B. 9months of owning it and 40 something hours, it broke down on me while cutting my grass. It's in the shop as we speak. I won't get it back until the cutting season is over I'm told. My first experience with the mower has not been so great. I understand it's not every bodies experience, but I won't buy another wright. It also missed grass quite often so I'd have to go over a line a few times. I usually blame myself for issues(user error)... I changed blades, belts, oil, spark plugs etc, and it still missed grass at a snails pace. I never had a John deer so I may try them next. I'm small time, I cut a few yards in my neighborhood because folks like my work, so I don't need a huge industrial machine atm.
Za te pare dobiš 6 Golf dvica, i malo naše balkanske mašte, da vidiš kakvu kosačicu složiš, i ostanu ti 4 auta 😃 Jedan motor za točkove, drugi za noževe, ne razbiješ je 80 godina. SCAG je zakon 😃😃😃
I've had a lot of velki wright products and they were all junk and cheaply put together and they laugh about it instead of making them good they charged as much as they can and hope it screws up fast enough so you have to buy another one and then they advertise it the next one is the best thing since sliced bread that includes their mowers I'll never buy one of their products
not pointing fingers at you and your guys but did you know there is a law in georgia that if a motor cyclist has a wreck because of grass that is discharged into the roadway the landscaping company is responsable for all injurys incured by the cyclist iv been noticing alot of folks doing it and they may blow it up later but it dont take but a few seconds on the roadway for a guy to go down and its a mess after that
Wow if a "cyclist" falls off the bike and gets injured because of a few blades of grass they shouldn't be riding a bike... What a ridiculous law. I think he's in his own backyard anyway... That's a basketball court or something.
Wright must've got a great deal thru Briggs n Stratton to endorse their product commercially. I'm sceptical about crappy Briggs engines. I like the mower, but HATE the engine. Is there anyone who has put 500+ hrs on the new Vanguard 40hp efi? Problems? Issues?
What is your contact information brother Nicholas because I am into landscaping services landscaping services equipment and trucks trees services tree services equipment and trucks and if I ever come to Georgia I want to meet you in person because I am a big fan of you and your company and yes I am a fellow TH-camr myself
![THE BIGGEST MOWER I'VE EVER SEEN [WRIGHT ZXT 40HP BEAST!]](http://i.ytimg.com/vi/LyCDc4p9g5Q/mqdefault.jpg)
![THE BIGGEST MOWER I'VE EVER SEEN [WRIGHT ZXT 40HP BEAST!]](/img/tr.png)
![[Full Episode] MasterChef Junior Thailand มาสเตอร์เชฟ จูเนียร์ ประเทศไทย Season 3 Episode 13](http://i.ytimg.com/vi/NlY2uzrALY8/mqdefault.jpg)
When I demo the ZXT the frist thing noticed is discharged of glass clippings blew my mine. The horsepower come with the one you have has been my favorite thing about the mower . We them ninjas. hope family is well and keep up the hard work . #wapcha
That is crazy. It looks like a sweet mower. Love how the wheels look
Love the mower talk. Just picked up a 2020 scag tt2 for the big stuff. Can't wait to see how it mows tomorrow.
Looks like a great mower hope you get a lot great use out of it.
Sweet! Love that oil guard system. True game changer.
That is a nice mower. It looks like it leaves a real nice cut
The cut looks uneven or is it me? There is a strip left in it
I have a new Spartan and I had about 6 bolts loosen up and told the dealer that the factory needs to use Loctite. Otherwise no problems 175 hrs
Keep up the great work and thanks for sharing this with us take care
Welcome Hayden 😉👊🏻
@@sgninjas 👍🏻
if your dealer sends you some new screws for that placd, get yourself some Re Loc-tight and put it on the screws before you put them in.. Just put very little on them and it wont rattle out.
WRIGHT is the RIGHT CHOICE.
Thanks for the video Nick..
I started using Amsoil for air cooled engines because of the zinc content. I researched information concerning this extensively, and decided to try it. Can’t do any harm.
Supposed to run cooler, based on actual controlled conditions in lab.
Just run Rotella or any other diesel oil. Most have the same amount of Zinc as Amsoil.
Looks like insanely good blade tip speed.
Wow 😲 that is something else. I like it.
Looks like it fans out the clippings more than a zk deck?
personally I would never run a new engine much more then 10hors before an oil change. 500 on new vehicle. as that's when you get the most wear from the engine break in. Wrights are super nice mower I'm running the ZXL.
Awesome video bro 👍
Nick I recommended those Ballard ultra high lift blades to put on your ZK if you put them on there it will shoot grass just as far as your new mower... Or at least very close
Always keep your mower deck clean all the time.
Great click bait with your title! I'm about to buy this mower. I'm demoing one this weekend. Think it's a 2022 model. I can't believe how fast it is! I'm selling my 2004 Toro commercial zero turn.
I bought one of wrights first sit down z after running their standers and loving them for years but unfortunately it was a lemon and it really turned me off on their sit downs but they have stepped their game up on the sit downs.
Ninja make in the house!!
Hey nick, have you had a look at some Kavli blades for your mower. They are a Australian business and they do export to the USA. It would be great to see a review on them. There located in knoxfield Victoria Australia.
Never heard of them, I’ll have to look into that
@@sgninjas go look at “something to look at “channel he uses them
Beast Mode
Them vanguard engine are nice least problematic 👍😎
Yessir, haven’t let me down yet 👍🏻💪🏻
I replaced a 23 horse Kohler with a 28 horse Briggs 810 efi. It been trouble free for the last 3 years and the power is amazing. Oh and it uses about 1/3 less fuel than the Kohler did.
Wow what a beast 🔥
CONGRATS ON 53K SUBS
Take in to factor the grass. Dry or wet. Height. (Throttle ) this looks ordinary to me. I haven’t sat on a brand new mower in a while. Just sharp blades and main rain it but. Double cuts basically gets rid of any bagging issues because of how far the mower disperses the grass
But you still can't go wrong with sit down or stand up
I like my ferris and deere but would like to try wright
I thought you were going to show us how far it would discharge, but you had the camera zoomed in on the edge of the deck
Get the front tweels, trust me it will make just as big of a difference and ride quality as the rear, I actually think it makes a bigger difference to have them in the front than the back. The ride quality is much improved
I’m afraid they’re gonna be super front light and it’s going to bounce around too much
I think they’re only like 10 pounds lighter per wheel, you you know twheels are heavy. I haven’t had any issues with the front coming up, I have a toro Z master. These are heavy mowers, they don’t rely on the front wheels to keep them down. A lot of front casters are air still and are lighter than the tweels.
Just give it a shot, trust me you might do it for your other ones to
@@michaelgutter2004 I have them on the front of my Spartan stander with the front suspension but radials in the back. It is amazing only problem is it's super wet ground the tweels can tear up the Grass but normal conditions they are amazing. I thought I was the only one that likes front tweels lol.
Looks like them rear tires need air. 😂😂😂😅😅😊
Would it be possible for you.to film a cold start on your ZXT? I'm not 100% sure my ZXT starts correctly when cold. Thanks for your time.
Sure can, no problem 👍🏻
I don't like the briggs I want one with kawasaki
Wonder what fuel consumption is compared to my 26.5 hp kawi. Way more power but efi compared to carburetated
My zxt 61 with the 40hp throws grass like 20' at least
I’ve seen other videos as well of people losing bolts. They should be using blue loctite on the bolts for most things.
Don't know where u are?but in East Tennessee its dry .custamers not wanting it cut.leaves brown tire marks.it's so dry .baD.like captain, crunch, was like this in st.louis. 12 years ago..
Can’t stand the stand ups. Us kacy guys like to sit back out a leg up listen to music and relax lol. Some nice look sing wheels. What’s the deal with those ? Used to exmarks and Toros
Cutt about 10 out of 60 yards ..it's thst dry?
I've tried many different brands of mowers , and I can't find anything that works as well as the toro turbo force decks
😂
My first wright is a Stander B. 9months of owning it and 40 something hours, it broke down on me while cutting my grass. It's in the shop as we speak. I won't get it back until the cutting season is over I'm told. My first experience with the mower has not been so great. I understand it's not every bodies experience, but I won't buy another wright. It also missed grass quite often so I'd have to go over a line a few times. I usually blame myself for issues(user error)... I changed blades, belts, oil, spark plugs etc, and it still missed grass at a snails pace. I never had a John deer so I may try them next. I'm small time, I cut a few yards in my neighborhood because folks like my work, so I don't need a huge industrial machine atm.
Shouldn’t have gotten a stander b. They shouldn’t have made a stander b.
@@bofkaycee1970 ☹️
Deck probably wasn't pitched
What happened to the Spartan mower?
Mow power
heyy WHAT'S UP HOYEAHHH
Just slicin ova herrrrr Ninja, 😁 hope all is good
@@sgninjas YEAHH going good but crappy weather raining
@@sgninjas Have you checked out the ventrac mowers they are an absolute beast and they have a standup one they are absolutely insane
Love the smooth 60 FPS it’s better 60 FPS but sadly it’s a GoPro is not on 60 it’s on 24FPS
@@sgninjas CONGRATULATIONS ON 53K subs
Use blue locktite on your bolts
It just don’t have that super clean clean cut like the Scag does.
Scab 😏😉👊🏻
Za te pare dobiš 6 Golf dvica, i malo naše balkanske mašte, da vidiš kakvu kosačicu složiš, i ostanu ti 4 auta 😃
Jedan motor za točkove, drugi za noževe, ne razbiješ je 80 godina.
SCAG je zakon 😃😃😃
#SCAB 😏😏
I've had a lot of velki wright products and they were all junk and cheaply put together and they laugh about it instead of making them good they charged as much as they can and hope it screws up fast enough so you have to buy another one and then they advertise it the next one is the best thing since sliced bread that includes their mowers I'll never buy one of their products
Miss the old vids wit pizza and the other guys . Now it’s more talking and less working . L
not pointing fingers at you and your guys but did you know there is a law in georgia that if a motor cyclist has a wreck because of grass that is discharged into the roadway the landscaping company is responsable for all injurys incured by the cyclist iv been noticing alot of folks doing it and they may blow it up later but it dont take but a few seconds on the roadway for a guy to go down and its a mess after that
Wow if a "cyclist" falls off the bike and gets injured because of a few blades of grass they shouldn't be riding a bike... What a ridiculous law. I think he's in his own backyard anyway... That's a basketball court or something.
Wright must've got a great deal thru Briggs n Stratton to endorse their product commercially. I'm sceptical about crappy Briggs engines. I like the mower, but HATE the engine. Is there anyone who has put 500+ hrs on the new Vanguard 40hp efi? Problems? Issues?
I have two 37 hp
One 875 hours one 400
Strong and stable. Excellent engines.
Kubota Diesel
🤘😂🤘
Do you post on Instagram ever?
Very nice mower probably covers some ground quick 👍🏼
How is Karin doing?
We will see tomorrow
Sup Ninja 🥷
What is your contact information brother Nicholas because I am into landscaping services landscaping services equipment and trucks trees services tree services equipment and trucks and if I ever come to Georgia I want to meet you in person because I am a big fan of you and your company and yes I am a fellow TH-camr myself
Not shooting it far, 1.5 passes at most. Thats lame
Long winded, said zero