when it comes to the ipod connection, your method is not correct. The correct way of using the ipod on the tonematch is to use the channel 4&5 with a split cable red (Ring) on top and gray(tip) on the bottom and the 1/8th end into the ipod. Also you have to set the Tone Match preset to DJ play back to get the optimal sound playing the ipod.
Was thinking about these two devices (PA and Tonematch)-Can anyone tell me how you would route sound from a Laptop holding Midi/Audio files to the ToneMatch/PA? Thanks.
Hi Gene, Would you kindly help me out? I hooked up my guitar cable into the Bose T1 ToneMatch on channel 2..I selected Acoustic guitar, turned on both volumes (on Tonematch and Base at bottom) but still did not work? ....I started to play the guitar but did not hear any sound from the Bose speaker . Also, I did not see the green light at the top of the input signal on the channel 2 2 .....Do you know the solution?
I own this model and it has great sound I don't use the Tone match I only put a keyboard through this PA system. the mixer is in the keyboard. So My question is Can I pan musical instruments using my Keyboard settings so that it comes out left or right side of the 12 speakers. 6 Left and 6 Right. ?
After rewatching several times, I was able to duplicate the way you have the speaker array bag set up. So thank you!! Yours is the only video to properly show that. Looking forward to my first big gig this weekend with the 1S. I have a Peavey 6 BT mixer rather than a Tonematch but it works just as great. Edit: one month later and I have a Tonematch which does work better and utilizes the B1 a lot better. :)
Good thing I found this video again!! My friend has two Model IIs hooked together to one mixer. If you were using Tonematch like Gene does here, you would just set one up normally; but on the second 1S, you would use the one 1/4 plug on the power stand of the second 1S and plug it into, say, the 4/5 channel on the Tonematch and control it that way. But first, you would have to set the volume on the second 1S to halfway or so.
Hey, Neil!! You would do that the opposite way actually, by plugging the Pioneer mixer into an available channel on the T1. The way Bose recommends you to do it is to plug that mixer into the combo Channel 4/5. That is, if you set your Tonematch preference for DJ/Playback. Gene didn't do that here. He started from scratch without any presets. I hope I was able to help at least!! :)
when it comes to the ipod connection, your method is not correct. The correct way of using the ipod on the tonematch is to use the channel 4&5 with a split cable red (Ring) on top and gray(tip) on the bottom and the 1/8th end into the ipod. Also you have to set the Tone Match preset to DJ play back to get the optimal sound playing the ipod.
Como funciona el cable digital de mesa tonemach
Podías explicar un vídeo
Saludos
Was thinking about these two devices (PA and Tonematch)-Can anyone tell me how you would route sound from a Laptop holding Midi/Audio files to the ToneMatch/PA? Thanks.
Hi Gene, Would you kindly help me out? I hooked up my guitar cable into
the Bose T1 ToneMatch on channel 2..I selected Acoustic guitar, turned
on both volumes (on Tonematch and Base at bottom) but still did not
work? ....I started to play the guitar but did not hear any sound from
the Bose speaker . Also, I did not see the green light at the top of the input signal on the channel 2 2 .....Do you know the solution?
How can I connect Bose L1 model 2 24 speaker to my Samsung 82” OLED TV? Using optical or HDMI(ARC)?
I own this model and it has great sound I don't use the Tone match I only put a keyboard through this PA system. the mixer is in the keyboard. So My question is Can I pan musical instruments using my Keyboard settings so that it comes out left or right side of the 12 speakers. 6 Left and 6 Right. ?
Well by god there hill billy! This is by far the best demo I’ve ever seen here on Facebook! 😂🥴🥴🥴
Can you not show a bit of respect to the man? You half wit prick
May I ask that 1/4 for the ipod is a TS or TRS?
After rewatching several times, I was able to duplicate the way you have the speaker array bag set up. So thank you!! Yours is the only video to properly show that. Looking forward to my first big gig this weekend with the 1S. I have a Peavey 6 BT mixer rather than a Tonematch but it works just as great.
Edit: one month later and I have a Tonematch which does work better and utilizes the B1 a lot better. :)
Can you add a monitor to this system
So what about wireless microphone?
someone needs to show you how to upgrade your video camera... :0 oops.
Where do you get that bracket for the mixer?
Speakers come with one side only ??
how do you connect with another Bose L1 model 1S ?
Good thing I found this video again!!
My friend has two Model IIs hooked together to one mixer. If you were using Tonematch like Gene does here, you would just set one up normally; but on the second 1S, you would use the one 1/4 plug on the power stand of the second 1S and plug it into, say, the 4/5 channel on the Tonematch and control it that way. But first, you would have to set the volume on the second 1S to halfway or so.
Hi Can you show me how i would connect the tone match to a pioneer mixer to use as dj please.
Hey, Neil!! You would do that the opposite way actually, by plugging the Pioneer mixer into an available channel on the T1. The way Bose recommends you to do it is to plug that mixer into the combo Channel 4/5. That is, if you set your Tonematch preference for DJ/Playback. Gene didn't do that here. He started from scratch without any presets. I hope I was able to help at least!! :)
is there any way you can set up a powered vocal monitor to this t1 tone or even two...
I was asking the Same question, do you have any answer?
Thank you.
Great