Thanks for this, just had to do exactly the same as wife’s car door was broken, was trying to replace the wiring harness but the door was stuck so double wammy.. broke the casing, fiddled about and bosh the door opened.. all fixed now.. this is the only video on TH-cam that helped.. cheers..!
Those hairpin clips on the window winders are very common. Use a pick tool, with a slight hook on it to remove it. Just press on the door panel to reveal it. Once off, put the clip back on the handle (so you dont loose it). With the clip in place, the handle just pushes straight onto the shaft. No need to fiddle the clip back on.
I dont know whether to thank you or just laugh..... I was looking how to get into my car because a customer jammed the seatbelt in between the door. This will probably help in some way. Now the easy way yo open the door without braking anything. Go to the rear door that won't open, with one hand lean through the window and half pull the handle on the inside, then lock the doors using key fob. You will feel the lock catch the handle lock mechanism. Then just pull the handle from the outside and Voila the door will open........ Dont brake your door!
got your point, thanks . i had to replace the door catch because it was broken internally within the catch it self so done all that , it was bit of fun and exciting
It should be the wiring underneath door, because open and shut most they disconnect, if you take the covered plastic part off (which you could find in door joint) you can see wire and repair it, i think it will help 🙏
No need to do all this. Sit inside car lock all doors with key fob. Once locked undo affected door with internal handle. The actual issue is the wiring harness that come into the door at the bottom below the hinge. Unplug harness remove rubber cover, then you will see a broken wire. You can get a harness repair kit from ebay
@@SniperAddy no mate but there is a video on TH-cam already thats how I found out. They show it whinding down window but works wither way. Once door is open you need to fix faulty wire harness
unfortunately on this one wire was not the problem , in some vauxhall wire get damaged as its a common fault on them but on this one, it was the door catch inside broken so i had to replace it , many thanks
Thanks for this, just had to do exactly the same as wife’s car door was broken, was trying to replace the wiring harness but the door was stuck so double wammy.. broke the casing, fiddled about and bosh the door opened.. all fixed now.. this is the only video on TH-cam that helped.. cheers..!
Glad it helped🙏
Those hairpin clips on the window winders are very common. Use a pick tool, with a slight hook on it to remove it. Just press on the door panel to reveal it. Once off, put the clip back on the handle (so you dont loose it). With the clip in place, the handle just pushes straight onto the shaft. No need to fiddle the clip back on.
I dont know whether to thank you or just laugh.....
I was looking how to get into my car because a customer jammed the seatbelt in between the door. This will probably help in some way.
Now the easy way yo open the door without braking anything.
Go to the rear door that won't open, with one hand lean through the window and half pull the handle on the inside, then lock the doors using key fob. You will feel the lock catch the handle lock mechanism. Then just pull the handle from the outside and Voila the door will open........ Dont brake your door!
got your point, thanks . i had to replace the door catch because it was broken internally within the catch it self so done all that , it was bit of fun and exciting
Arms 🏢
Legend mate had same problem you saved me hours work by not having to take it apart
@@guybrady9279 your welcome
I have one problem.
When I close the rear door it shows that is open. When I open the door it shows that is close. What can I do?
It should be the wiring underneath door, because open and shut most they disconnect, if you take the covered plastic part off (which you could find in door joint) you can see wire and repair it, i think it will help 🙏
No need to do all this. Sit inside car lock all doors with key fob. Once locked undo affected door with internal handle. The actual issue is the wiring harness that come into the door at the bottom below the hinge. Unplug harness remove rubber cover, then you will see a broken wire. You can get a harness repair kit from ebay
Neil batchelor, do you have a video of this ?
@@SniperAddy no mate but there is a video on TH-cam already thats how I found out. They show it whinding down window but works wither way. Once door is open you need to fix faulty wire harness
unfortunately on this one wire was not the problem , in some vauxhall wire get damaged as its a common fault on them but on this one, it was the door catch inside broken so i had to replace it , many thanks
ONE WORLD how did you get to that bit on 4:08 I don’t know how to get that bit as the door won’t open at all
@@SniperAddyhi, i recorded as how did i did it, just to get the idea so you can figure out. Watch it few time to understand better. Hope it'll help
Well detailed video 👍
Thank you very much
thanks