I think a lot of the viewers would love to see the foil heater mod you have done, or even better, an in depth tour of all the mods you‘ve done (magnet, wood base, heater, etc.)❤
You might find it a bit hard but you can check them out at his Naver blog, it's all in Korean but maybe translate them? Basically what I saw was that he made all the wooden part himself with such and such skills. He mentioned lots of repeated manual labor.
The modifications are really impressive. Would certainly subscribe if there were subsequent videos on how to incorporate these modifications into the Cafelat. Would also be interested in purchasing many of them! Even if this required some circuit design/implementation (thinking about the piston/basket heater), I think some users would really go for it. Thanks for the great video otherwise!
This is hands down the most beautiful Cafelat Robot I've ever seen. Simply stunning. Your attention to details with your accessories is second to none too. Everything fits perfectly like a puzzle. Clean, warm, inviting. ❤
Omg so many things I want for my set up. That tray with your stuff is amazing. Looks sharp! Curious how that preheating element works for you. I’ve been thinking about getting that some time for my robot. Looks like your piston sites higher up to fit that shot glass under? Shot mirror, tamper, base, pf handle, I’d buy all those add ons if they were for sale anywhere.
Your coffee station is beautiful. Everything is placed nicely, and is colour matched really well. Bravo 🙌 Can you provide some details on the heating element you put in the robot?
Thanks for the compliment! I have added the list of modifications from the original robot in the video descriptions. I hope you find it helpful. Sorry for the late reply 🙂
@@awesomefinger you definitely need to do some tutorial on how you added the heating element. How well does it work? Can you provide a link the heating element kit you used? I would like to try it on my robot.
@@jnattress After turning on the 24v power for about 5 minutes, it becomes quite warm, and after 10 minutes or more, it becomes so hot that it is hard to touch. I'm sorry that I can't give you an exact link because the heater I made was made by purchasing parts one by one from an offline store.
Wooden piece for the P64 absolutely rounds out the look. And every other upgrade is another stroke of genius. Wooden fetish all the way. As an aside I recommend Lance Hedrick's presentation on slow - feeding coffee grinders. Much love
sorry. It is difficult to provide because there is no record of the tutorial. However, if I have another chance to make it, I will post a video record at that time.😢
Dude, this setup is so sick! What modifications did you make on the Robot, any of those are public? The pressure gauge placing is so nice, and if I'm not mistaken there is a heating component aswell?
Wow this is the most blinged Robot I've seen. Excellent. Have watched your video now 4x. If u ever start selling all the mods as a kit, please put me down for 4 sets (4 in different places). Cheers!
@@awesomefinger I'm also interested in the wood upgrades. I think there a lot of people like myself who come across your videos that would love to purchase them, they look amazing!
@@awesomefinger I just came across your video and I agree - I'd purchase all your mods or specs/blueprints if you made them available. Incredibly beautiful work.
For the cost of this machine, I will never understand why they don’t all look this way. That is beautiful little device you’ve made and I am jealous! :)
the work flow for the robot is par none. @cafelat you can use between 15g to 20g of coffee. the deep porta filter basket is 57.5 mm and doubles as the brew chamber... for espresso at home you can't go wrong with the robot ... you can buy multiple / 4+ baskets and 4+ screens very reasonably and pull multiple rapid fire double shots (35-40 g ) with ease. the portafilter basket will reduce the temperature about 10-12 degrees from BOILING putting you right around 200F or 93C for extraction ... very well thought out just like FAEMIMA BABY it's inspired by !! Once you're done you just wipe the piston, dump the espresso puck, rinse the screen and basket and you're ready for the next shot ... Easy !! I love this machine.
The compatibility with 58mm accessories and the espresso quality are better with the Flair 58, but the Robot’s exceptional convenience makes it feel almost perfect! Its design also looks like a piece of objet.
For medium and dark roast no, boiling water drops to about 90 degrees with the thermal mass of the machine so you’re good to go. For light roast you can either preheat by getting a basket add on that plugs the bottom so you can let the piston sit in hot water, or you can look at things like turbo shots which fire through so quickly that pre heat doesn’t matter.
The basket and portafilter of the robot have minimal contact with hot water, so extensive preheating isn’t necessary. However, with light-roasted beans that require higher water temperatures, I preheat the cylinder electrically to minimize temperature loss^^
Since woodworking is my hobby, I made it out of scraps of walnut in a woodworking shop. We have a wide variety of trees for sale on our website, so you can choose the one you want.
Since it is installed inside the piston, it cannot be removed again, and I will attach a link with a picture of the production process. blog.naver.com/ddadak_kr/222711799289
@@awesomefinger thank you for sharing, such a detailed blog! Could I ask what size kapton strips you used and what the wattage is? I would like to do this to my robot too! Thanks 🙏
the newest flair is better but the work flow for the robot is par none. @cafelatuk flair you have to reset the piston ... can only use 18g of coffee, the porta filter is only 45.5 mm , the Ronot it's 57.5 mm ... flair is good for travel but for home go wtih the robot ... you can buy 4+ baskets and 4+ screens very reasonably and pull multiple rapid fire double shots (35-40 g ) with ease. the portafilter will reduce the temperature about 10 degrees from BOILING putting you right around 200F or 93C for extraction ... very well thought out and simple just like FAEMIMA BABY it's inspired by !!
You unscrew it from the arm and move it on to one of many easily available mounts that simply screw on using the rear arm bolt. There are a lot of 3D printed options.
![[Barista Vlog] Working ‘Solo’ on a Morning ‘Rush’ with My Favourite Girls! | Melbourne | LaurAngelia](http://i.ytimg.com/vi/54YESbr8XzY/mqdefault.jpg)
I think a lot of the viewers would love to see the foil heater mod you have done, or even better, an in depth tour of all the mods you‘ve done (magnet, wood base, heater, etc.)❤
you should think about posting a video of this mod - it would be super intersting
Yes please do. I’m so curious about all of that
You might find it a bit hard but you can check them out at his Naver blog, it's all in Korean but maybe translate them? Basically what I saw was that he made all the wooden part himself with such and such skills. He mentioned lots of repeated manual labor.
@@hyeleekim9604what is the link kf that blog? could not find any information😢
The modifications are really impressive. Would certainly subscribe if there were subsequent videos on how to incorporate these modifications into the Cafelat. Would also be interested in purchasing many of them! Even if this required some circuit design/implementation (thinking about the piston/basket heater), I think some users would really go for it. Thanks for the great video otherwise!
Would you ever think about selling custom made parts for the robot? I’d be super interested in buying them.
This is hands down the most beautiful Cafelat Robot I've ever seen. Simply stunning. Your attention to details with your accessories is second to none too. Everything fits perfectly like a puzzle. Clean, warm, inviting. ❤
Really like the wooden accessories of the robot. Do you make them yourself? I would love to buy them!
Omg so many things I want for my set up. That tray with your stuff is amazing. Looks sharp! Curious how that preheating element works for you. I’ve been thinking about getting that some time for my robot. Looks like your piston sites higher up to fit that shot glass under?
Shot mirror, tamper, base, pf handle, I’d buy all those add ons if they were for sale anywhere.
cool! where did you find the part to move the pressure gauge?
Your coffee station is beautiful. Everything is placed nicely, and is colour matched really well. Bravo 🙌
Can you provide some details on the heating element you put in the robot?
Thanks for the compliment! I have added the list of modifications from the original robot in the video descriptions. I hope you find it helpful. Sorry for the late reply 🙂
@@awesomefinger you definitely need to do some tutorial on how you added the heating element. How well does it work?
Can you provide a link the heating element kit you used? I would like to try it on my robot.
@@jnattress After turning on the 24v power for about 5 minutes, it becomes quite warm, and after 10 minutes or more, it becomes so hot that it is hard to touch. I'm sorry that I can't give you an exact link because the heater I made was made by purchasing parts one by one from an offline store.
The most beautiful Cafelat robot i have seen so far! Thanks for sharing.
Wooden piece for the P64 absolutely rounds out the look. And every other upgrade is another stroke of genius. Wooden fetish all the way.
As an aside I recommend Lance Hedrick's presentation on slow - feeding coffee grinders. Much love
Amongst all the manual pressed espresso machine, cafelat robot has the easiest and straight forward flow.
this is so pleasurable to watch. well done!
Thanks for watching the long video^^
@@awesomefinger will you ever open something like an Etsy shop? I would love to use your portafilter handle or tamper
@@theoperrin9653 No plans yet. We will contact you when we sell
Inspiring! Would it be possible for you to share, how did you do all these modifications and precisely what products did you use?
Yes, please.
Do you have tutorial on how to make those modifications to robot? I love it!
sorry. It is difficult to provide because there is no record of the tutorial. However, if I have another chance to make it, I will post a video record at that time.😢
Would you be able to explain how you attached the magnet? Genius solution!
Dude, this setup is so sick!
What modifications did you make on the Robot, any of those are public?
The pressure gauge placing is so nice, and if I'm not mistaken there is a heating component aswell?
Thanks for the compliment! I have added the list of modifications from the original robot in the video descriptions. I hope you find it helpful.
I wish my Robot looked like this! Wow! Beautiful!
지금껏 유튭에서 본 카페랏 추출영상중에 제일 완벽하네요
감사합니다!! 저도 로봇 사기전에 관련영상 엄청 찾아봤는데 뭔가 딱 필요한 추출영상이 없어 아쉬웠었어요. 허접하지만 누군가에게 도움 되는 영상이 됐음 좋겠네요^^
Those wooden accents on your Robot are so beautiful!
Are they custum made or can I buy them some place?
Very nice setup and video. Liked all the different camera angles.
너무 이쁜 공간이네요. 하나하나 디테일과 마감이 작품입니다. ^^
주방이 넓었으면 막 널부러놨을텐데 결국 공간의 협소에 의한 반 강제 정리왕이 됐네요ㅋㅋ 부족한 주방, 홈카페 예쁘게 봐주셔서 감사합니다!!
I wonder if you can do a follow up video on your robot mods?
There is no planned upload yet (since making a video is more cumbersome than I thought ;) I will consider it if I have time.😆
Wow this is the most blinged Robot I've seen. Excellent. Have watched your video now 4x. If u ever start selling all the mods as a kit, please put me down for 4 sets (4 in different places). Cheers!
Looks like you are the ROBOT 🤖
Very nice mods, and great looking workflow.
Will you be selling any of the wood accessories you make? It looks excellent! Especially the wood base and mirror combo.
It’s handmade for personal use, so unfortunately, I don’t have any plans to sell it. Thank you for your interest!
It would be greatly appreciated, if you could offer your upgrades wooden for the public. I hope to hear from you soon.
Good luck.
I made it for personal use, but if I get a chance, I'll think about making it so that I can provide it to those who need it. thank you🙂
@@awesomefinger I'm also interested in the wood upgrades. I think there a lot of people like myself who come across your videos that would love to purchase them, they look amazing!
Would love to have the tamper and portafilter wooden handles! Please let me know if you decide to make some to order. Thanks
I am one of them. Totally love these wooden hands and handle 😊
@@awesomefinger I just came across your video and I agree - I'd purchase all your mods or specs/blueprints if you made them available. Incredibly beautiful work.
For the cost of this machine, I will never understand why they don’t all look this way. That is beautiful little device you’ve made and I am jealous! :)
I believe all of the Robots are hand assembled so a good portion of the cost is for labor.
@@LumiLunar I stand by my statement.
카페렛 로봇에 우드가 들어가니 멋있네요 템퍼 가이드도 우드로 튜닝 하시고 대단하세요!!
사실 처음엔 금속으로 된 기성품 핸즈가 마음에 안들어 핸즈만 만들어 쓰자... 라고 시작했던건데 하다보니 욕심만 늘어 결국 로봇인지 호두까기 인형인지 정체성이 모호한 뭔가가 탄생한 것 같네요ㅋㅋ 목공이 취미라 톱밥 튀어가며 열심히 만들어봤어요^^
선생님... 셋업이 너무 아름다우십니다 ㅠㅠ 저도 저렇게 하고싶네요
에고, 무슨 선생님까지...ㅎㅎ 칭찬말씀 감사합니다!! 집 주방이 넓지 않은 관계로 큰 머신을 들이지 못하는 안타까운 사연도 있....ㅠㅠ
the work flow for the robot is par none. @cafelat you can use between 15g to 20g of coffee. the deep porta filter basket is 57.5 mm and doubles as the brew chamber... for espresso at home you can't go wrong with the robot ... you can buy multiple / 4+ baskets and 4+ screens very reasonably and pull multiple rapid fire double shots (35-40 g ) with ease. the portafilter basket will reduce the temperature about 10-12 degrees from BOILING putting you right around 200F or 93C for extraction ... very well thought out just like FAEMIMA BABY it's inspired by !!
Once you're done you just wipe the piston, dump the espresso puck, rinse the screen and basket and you're ready for the next shot ... Easy !! I love this machine.
ive made thousands of shots and i wipe the piston on mine once a month tops.
The compatibility with 58mm accessories and the espresso quality are better with the Flair 58, but the Robot’s exceptional convenience makes it feel almost perfect! Its design also looks like a piece of objet.
@@awesomefinger Especially now with the good and cheap milk frothers like Dreo barista maker. So you can get Cafelat robot + Dreo + kettle = $450
Wow what a robot dream setup.. fuck a linea mini or slayer, THIS IS IT!!
Hi, are you still offering those mods?
베이스는 어떻게 나무로하셧나요? 위로 덮으신건가요 아니면 원래 있던 베이스를 뺴고 달으신건가요?
그 발열체가 무엇인지 공유해 주시겠습니까?
진짜 너무 탐납니다ㅜ 카페랏 나무튜닝 안파시나요??(진심입니다ㅋㅋㅋㅋㅋㅋㅋㅋㅋ)
Café express Arte !!! Argentina 😊
Nice video! Loving the shallow depth of field shots📷
와...진짜 미쳤다..커피내리는게 문제가 아니네요ㅠ
Impressive setup and a very well made video!
So you don’t need pre heat first with this machine?
For medium and dark roast no, boiling water drops to about 90 degrees with the thermal mass of the machine so you’re good to go. For light roast you can either preheat by getting a basket add on that plugs the bottom so you can let the piston sit in hot water, or you can look at things like turbo shots which fire through so quickly that pre heat doesn’t matter.
The basket and portafilter of the robot have minimal contact with hot water, so extensive preheating isn’t necessary. However, with light-roasted beans that require higher water temperatures, I preheat the cylinder electrically to minimize temperature loss^^
@@awesomefinger electrically? What is this fabulous science!
Love everything about this.
How can I buy such wood
Since woodworking is my hobby, I made it out of scraps of walnut in a woodworking shop. We have a wide variety of trees for sale on our website, so you can choose the one you want.
What is the link to your online store?
what grinder is this?
Lagom P64
Lagom P64
Can you explain what you are using for a mirror? It looks great!
It’s to look at the shot extraction to see if there is any channeling or other issues
请问robot手臂中间是用什么卡着才不会往下掉呢？
Neodymium Magnet(thickness 1mm*2)
@@coffeeling谢谢分享
Where did you get the magnet specific for cafelat robot? Any installation tips or adhesive required? Thanks!
How do you cut paper filters?
It’s a 58mm paper filter available as a pre-made product.
竟然現在才看到，可以請問預熱裝置的資料嗎？
24v Polyimide film
Truly amazing setup. Can I ask, how did you adhere the film heater to the piston? Thanks
Since it is installed inside the piston, it cannot be removed again, and I will attach a link with a picture of the production process.
blog.naver.com/ddadak_kr/222711799289
@@awesomefinger thank you for sharing, such a detailed blog! Could I ask what size kapton strips you used and what the wattage is? I would like to do this to my robot too! Thanks 🙏
Your gear siiick 👊
Wow - beautiful!
It’s a great setup! well done. Why do you bother measuring the input water? Surely you only need to measure the output.
If you know your beans well, you can figure out how much water to add to have no leftover. Saves a step in cleaning as no need to "purge" the Robot.
portafilter should be filled with water for more thermal mass as it is described in robot's manual
Bravo!
Hey! So... What do you think is better, flair 58 or robot?
the newest flair is better but the work flow for the robot is par none. @cafelatuk flair you have to reset the piston ... can only use 18g of coffee, the porta filter is only 45.5 mm , the Ronot it's 57.5 mm ... flair is good for travel but for home go wtih the robot ... you can buy 4+ baskets and 4+ screens very reasonably and pull multiple rapid fire double shots (35-40 g ) with ease. the portafilter will reduce the temperature about 10 degrees from BOILING putting you right around 200F or 93C for extraction ... very well thought out and simple just like FAEMIMA BABY it's inspired by !!
커피의 신
Nice! Can you explain somewhere how you went about moving the pressure gauge?
You unscrew it from the arm and move it on to one of many easily available mounts that simply screw on using the rear arm bolt. There are a lot of 3D printed options.
Very nice
Perfect !
Nice mod to the robot!
Great , i will try to order something like your tools 🎉
How many ml are the bottles where you keep the grains?
should be approximate 100ml judging from my eyes....Lol :)
very nice :)
Thanks for watching the video😃
Like a teacher of chemical class, when prepare👍👍👍
But no have a coffe time🤕🤕🤕🤕🤕🤕
how do you say you work in tech without saying you work in tech
why is that model in Wooden base and handle
돈..이..!
Šta će ti dve vage 🤦♂️ dodatna oprema ti košta koliko i sam kafe aparat, i tu ne mislim na mlin on i treba da je skuplji.
veruj mi ova osoba ima vece probleme od dvije vage
Great coffee set up. Too bad a girl will never see it hahaha
Every time I pull a shot with the robot, my wife looks at me with pity. Haha!
What a pain
ToT
Still faster than any espresso machine under 3k
get rid of those starbucks cups
my thoughts exactly
What starbucks cups
@@pavlobudiak6935 how many cups do you see in this video, let's play a game.