Parrot Bebop 2 - LiHV Battery conversion, Step By Step
ฝัง
- เผยแพร่เมื่อ 3 ต.ค. 2024
- This video shows how an idiot is able to convert a genuine Parrot Bebop 2 battery to an RC LiHV Battery.. Increasing flight time and lowering the cost of replacement batteries.
This mod works using a genuine parrot battery, and does not require any modification of your drone.
Music - www.Bensound.com
It's nice to see Bebops are still getting love on TH-cam. It's still my favorite ❤️
Nicely done...I just did the mod a different way about a year ago and it has worked out fine.
I actually like this mod better.
Thank you 😊👍 I found the method on a few different TH-cam channels - solaris was particularly helpful.. I'm curious as to how your mod is different, I'm not sure it's necessary to remove all the components provided you break the circuit..
@@bebopflyfree7470why need to remove all the components? Why dont just solder the new battery back to the circuit board?
@@FoochekhengNov.seventeen
Yes, just replace the balance connector on the battery and drone with XT60s. Shorter and simpler connection means less voltage drop. Hopefully there's not a sensor in the drone itself which checks for the battery circuit board... would need to check that first!
@@tasmedic if there is no sensor to check battery how we have that info on app ?
I did the chance a year ago to lihv and it flies great. Did use the same 3000mah for my bebop 1 and it flies also 15 minutes on this battery.
Thanks for your comment.. That's really interesting, I thought it would have given more flight time, I'm getting around 30mins on the bebop 2.. do you think its too heavy and the drone has to work harder to stay a loft?
@@bebopflyfree7470 on bebop 2 yes I can fly more than 23 minutes but on my bebop 1 it is less than 20 minutes. Think that the battery is too heavy but it works fine snd video is ok.
i had my bebop 2 last week hovering in 24mph winds, GPS had it locked really good, the wind got so strong that the drone dip down then back to where i had it, which is why i love this drone, but i just wish it was not so LOUD! the battery lasts 25 mins, but i like that you try making it fly longer.
Wow thanks for this
Thanks for the diy, I have one stock battery and one modded like this 😉.
Question: is the voltage supposed to be displayed still on screen after this mod? I only severed the spot on the board, did not remove components, then connected pigtail XT60 like this. However the voltage does not read correctly anymore so I have no idea what voltage it’s at during flight 😣.
great work!!
А почему вы просто не заменили на разъем хт60? Плату вообще нужно выбросить, она не нужна. Это bms. Если заряжать b6 то и bms не нужно. И корпус тоже не нужен. Его тоже выбросить. Батарея будет держаться лентой. Как на обычном гоночном дроне. Там для этого есть даже крепления по бокам. Я, кстати, летаю на 4g mod. Это лучше чем все dji и fimi.
I fly 4g mod also.. I also like the battery casing.. 👍
@@bebopflyfree7470 Я сделал батарею 3s1p из 21700 по 2.3Ач. Хватило на 16 минут висения. С модемом 4g. Элементы взял из батареи моего электросамоката.
@@bebopflyfree7470 how can I do the 4g mod?
Step 1
FULLY DISCHARGE THE BATTERY FIRST.
Good job, but it’s not worth the effort, do all this for a little more flying time, first reason, you not going have information about your battery status, going out of battery Juice, your bebop going to crash. Second the battery back for bebop it not that expensive, I got a 4250mha for 37$ free shipping. Working better than original battery.
I added a bigger battery but the drone now is unstable, oscillating left/right and the flight time is not improved. Is it possible to recalibrate it to account for larger batteries?
How much longer do you get the drone to fly, ? And can you send a link to the battery I need plz
do you think this drone can handle a 4s battery?
8:29 is it necessary to remove everything from front and back?
Pls reply
What a useless video no dialogue to describe what your doing or why