@@ribbytrivia sir may PLDT modem ako na disconnected which is gamit ko as wifi extender ng more than a year na. Ano po kayang problema? Bigla nalang siyang di gumana at nawala na ung blinking LOS niya then power and WLAN nalang naka open na ilaw sa router.
@@AldrinDelaPena-m2e Maraming pwedeng source ng issue nya. Pwedeng yung RJ45 cable, or may nabago sa settings, or yung modem na mismo, etc. Isolate mo na lang muna. - Try mo palitan ang LAN cable - Try mo reset ang router at configure mo ulit Kapag ayaw pa din, baka yung mismong router na may problem.
Depende po yung speed sa specs nung router. Luma na tong model na to, kaya I assume hanggang 100MBPS lang kaya nya. Pero try mo din. Libre naman yan kasi luman router lang gagamitin mo.
Yes. Technically, repeater is wireless talaga. Pero mas widely known ang term na "repeater" vs. sa deeper technical term na "access point". Kaya I use the term repeater para mas madaming tao ang makaintindi ng purpose ng video 😉
It worked! Thanks man! I wanted to change the wifi name and pass but there is no "WLAN Settings" under the "Network" tab in the dashboard of the adminpldt account. And when I use the "user" account, the "network" tab is missing. Have u tried to change the wifi name and pass of this repeater? Thanks.
@@ribbytrivia Indeed its weird. Even the credentials sometimes changes itself for some reason. Oh well at least I got it working as a repeater. Thanks again mate!
Depending on the pocket Wi-Fi device. It will be difficult to share that through a router if it has no RJ45 (LAN) port, and since you mentioned "pocket", I assume there's none. But in a slim chance that there is a LAN port, I'm sure there's a way... just not sure how specifically, since I will need a that pocket wi-fi device to play around to find out, and I don't have any pocket wi-fi with me.
Hello, after 10 days of non-stop effort, I accidentally came across your video. It was great and useful. I also have a fiber optic modem model AN5506-04-FS, which works very well, but there is no signal on the other side of the house. I want to use an old TP-Link TD 8961ND modem as a repeater or signal booster of the first modem. But apparently the AN5506-04-FS modem doesn't support the WDS function or if it does, I can't find it. Please teach how to do it. thank you
Sorry, I have no TP Link router to practice with. Every router has difderent settings. But the main idea is to reset the old router, disable dhcp at assign a static IP that matches the source IP mask. Then you can just connect it through LAN cable and you're good to go
Sir the modem has connection when conneceted, haven't done the steps here pero meron na siyang connection. Problem is masyadong mabagal. Ano po pwedeng gawin?
Reset ang retry. Pag ganun pa din, baka yung old modem sira na talaga. But do note na lumang modem na ito. Yung max speed nya mas mababa compared sa latest modems ngayon. I think 2.4ghz lang din ang band nya, wala pa syang 5ghz band
Sir, I successfully modified my disconnected hg6245d into a extender. it is on bridge mode. browsing and streaming is okay but when I do ookla speedtest or download something and the speed is fast like 4mb/sec, the disconnected modem restarts. The connection gets lost and ssid disppears from wifi list. then after 15secs the ssid appears again as if the modem restarted.
Yes. Just need to follow the IP Address mask of the provider when setting the static IP (e.g. 192.168.1.xxx for PLDT, 192.168.100. xxx for converge, etc.)
@@rainedeveraux2485 Sundan nyo lang po step-by-step yung video. Yan na mismo ang gagawin, wala na pong iba. Saang part po ba ayaw gumana? Anong error? Wala bang signal? Ayaw maka-connect? Sobrang dami pong pwedeng maging meaning ng "ayaw gumana", kaya please be specific po. Anyway, hindi naman po ako expert sa mga routers na ito. Ine-experiment ko lang din kung papano ko mapapagana. Kaya yung video, yan na po mismo ang alam kong way para mapagana sya. Kung sure po kayo na nasundan nyo ng tunay na step-by-step yang video, tapos ayaw gumana, baka po sira na ang modem.
Thank you so much sir Big help for me, pldt rp2804 model no need to have a debut switch activate because I cant log in my router to that way, but its already have a signal thx
th-cam.com/video/iGEIqVOKmg4/w-d-xo.html It's originally Converge, pero walang bearing kung saang ISP galing ang router. Basta same model, same process lang yan.
Hello nag work po siya pero paano ko po mapapalitan name ng wifi pati password ng router po na yon. Nag didirect na po kase siya admin ng main router pag nag 192.168 po ako
Iniskip ko po yung enabling debug switches kasi di po ako makalogin. Diretso configure po sa adminpldt for dns at lan. Okay lang po ba yun? So far nagkainternet naman na po at mabilis ang speed. Thank you
Gagawa lang po yan ng extension ng signal ng wifi. Magdadagdag ng access point kasi iko-connect mo yung lumang router sa main router. Tapos yung lumang router magta-transmit din ng wifi signal. Walanpong kinalaman yan sa pagpapa-stable ng connection ng main router. Kung yung main router nyo no signal, or weak signal, same din makukuha nung naka-connect na lumang router.
@@gamerspotph3161 You're welcome! Wala pong way na mawala ang LOS blinking. Ganyan na talaga sya habambuhay. hehe... Pwede nyo patungan na lang ng opaque na stickers or tape. Or patungan nyo ng glass figurine - parang aesthetics pa sya. hehe
hi dear . thanks for your education I have a fiber modem and I could not do it according to the instruction you gave. There is a problem somewhere in my work, but I don't know where. can you help me ?
Well, I'd like to help, but that would be very challenging. First is the communication - it's easier to isolate the problem if I can see what you are doing. Second, if you yourself can't even identify what you did wrong, how much more to me? When I am not even involved in your process. And lastly, all the tutorial I can privide are in the video, which are limited only to the specific router I used. I am not an expert nor a router support person. I just experiment on the old router and share it in the video. It's just something I do on my free time. Good luck though. My suggestion is take a look at my videos about tenda routers. Just buy that router as they are very easy to setup.
Sorry. That's all I have. Try to search for a new one. Also, there's a possibility that your admin password might have already been changed. If so, that cannot be reset.
Di po pwede wireless ang connection ng lumang router to source router. Pwede wireless kung mesh gamit mo, pero yung main node ng mesh mo kailangan pa din may wired connection sa source router
nung unang salpak po nmin ng lan cable gumana pero minsan hindinsya gagana kahit naka konek na no internet ...then i try this..error un and pw po.. pls help me
@@zaidlatifqureshi4542 If the red light is on the LOS indicator... that is fine. LOS indicates connection from the fiber line, which your old router obviously does not have, since you are using it only as an extra access point.
Mga boss tanong lang, may PLDT modem ako na disconnected which is gamit ko as wifi extender ng more than a year na. Ano po kayang problema? Bigla nalang siyang di gumana at nawala na ung blinking LOS niya then power and WLAN nalang naka open na ilaw sa router.
Madaming possible na source ng problem... Pwedeng yung LAN cable, pwedeng yung router mismo sira na, o baka may na-corrupt/nabago sa settings. Try mo palitan ang rj45. Pag ayaw pa din, try mo reset ang router at configure mo ulit. Pag ayaw pa din... Baka router na mismo may problem
@@QuestMajor Like I said... I know. I made a business decision of putting "Repeater" in the title, as that is a more widely understood terminology, as compared to "Access Point" or "Bridge". I anticipated that the video will not catch the interest of most people if I put the deeper technical (but more accurate) term in the title - as what happens to most things as well. If it's too technical for most people to understand, they won't bother looking into it. Consider this... as of writing, the video has 62k views, and you are only the 2nd person to correctly call out the inaccurate title. Out of those tens of thousands of people, only 2 of you. Repurposing the router to extend their Wi-Fi signal is more important to 99.99997% of these people, than to understand the correct terminology or the differences between Access Point, Bridge, Extenders, and Repeaters. Not all people, actually, most people watching my videos are not that technical to bother with these things. I'm not saying that my title is correct because of these reasons... of course not. You're point is valid and correct, no doubt. I'm just saying that I don't see any value, especially to the audience and my channel, if I correct the title now.
@@QuestMajor Yeah... whatever keeps you in your high horse buddy. 🤣 I've explained everything on my side. I'm not sure if you even read or understood any of it, but that's on you. Aint nothing I can do about that. Also, lookup the definition of "clickbait"... you might have a different definition of it. 😅
Lumang router na yan. Kaya ang maximum speed na kaya nya ay 100mbps lang talaga. Yung hardware nya hanggang dun lang ang kaya. Bili ka na lang ng router na kaya hanggang 500mbps or more, tapos yun ang gawin mong extender kung gusto ma-maximize ang speed
Good day, sir! I followed the video po but I still can't connect. Sinundan ko po 3rd octet ni globe to PLDT with same model of yours po ayaw pa rin po. Help po.
Depende sa router kung may settings na ganyan. Pero wala itong specific na router na to. Luma na to. Kung bagong model ang main router mo, mas mataas na max speed nung for sure compared dito. At di naman yan parang flow ng tubig na nahahati talaga yung speed. 😁 Baka may mg interference from main router mo kaya bumabagal.
Pede. Kung same model lang ng router, same steps lang. Kung ibang model, same steps pa din, pero baka iba ang settings. Ang idea lang ay (1) reset yung lumang modem, (2) disable dhcp, (3) assign static IP na tugma sa source - PLDT ay 192.168.1.X - yung X any number from 2 to 254 (4) Tapos. Saksak mo na sa LAN 1 from source.
Di ko din po kabisado. Igu-google ko lang din kung sasagutin ko, kaya mas ok kung kayo na mismo mag-google. 😁 Hindi po ako expert sa mga routers. Nag-e-experiment lang din ako kung pano ko mare-reuse yung lumang routers.
Kaya ng ano? Sorry di ako mind reader 😅 Ano ba gusto mong gawin? Libre naman mag-type dito... Pwede dagdagan ng impormasyon para mas malinaw 🤣 Gagamitin mo yung lumang router as a wireless repeater? Or may extra access point ka na tapos kokonektahan mo ng wireless repeater? Or tinatanong mo lanh kung papano at ano ang options for a wireless repeater? Or iba pa ibig mong sabihin?
@@ribbytrivia I think he meant those wireless repeater where said device connects to the main router without any cable. Anyway, would your tutorial work If my main router is Converge? Your superadmin credentials aren't working by the way, you should update your tutorial with these: Username: adminpldt Password: Mj5UI3OPr9vYq8bCxl1rV50E
@@yorib-a Thanks sa info. About wireless repeater option - not possible. It will work on any network. Kailangan mo lang sundin ang subnet mask nung source connection para yung static IP nya ay pasok sa IP ng source connection. Thanks sa new adminpldt account. Add ko sa video description.
Hinde ko po ma access yung old pldt na router ko po, kasi yung IP po sa router ko is IP na po nong main router ko, paano po ma acces yong repeater(PLDT) ko po?
@@jcaureo2828 Ok lang po yun kahit same sila ng IP. Wag mo muna i-connect ang repeater mo sa main router. Tapos Kelangan mo lang kumonek sa SSID ng repeater mo. Tapos punta ka sa browser, i-type mo na IP address nya sa address bar. Maa-access mo na settings nyan.
good day sir, successful naman yung process, naging repeater/extender na yung Fiberhome HG6245D router. the problem is, after 40 to 45 mins, nawawalan na sya ng data, ano po kaya problem & solutions? thank you.
Sir, pde ba gawin yung Phone usb tethering sa pldt fibr modem? baka my idea kayu sir, meron usb port kasi yung modem ng pldt fibr,baka pde yun smarphone maging source ng internet at isasaksak yung usb cable sa pldt fibr modem at enable yung usb tethering ng phone :)
Di ko pa nata-try yan. Pero luma nang model ang router na to. Malamang hindi pwede. Ang silbi ng USB ports ng router usually ay for Firmware update lang at pwede din gawing source ng 5V power. Also, may sarili nang modem ang mga phone, pwede mo i-on ang hotspot, makaka-share ka na ng internet. Bakit papadaanin pa sa router?
Thanks for the video! I did it all and it worked. Although, now I want to change the name and the password of the AP but its not possibile to acces that admin login page on that standard IP anymore. Can someone help me?
Di pwedeng gamitin ang USB ng router para mag-provide ng internet. Ginagamit lang yan for Firmware updates or kung gusto mo i-power ang device like fan
@@ribbytrivia pano ba to haha, yung provider kase namin dito parang multi source sila, globe, pldt at iba pa tas yun yung dinidistribute nila saming customers nila. Ngmamatter ba yun or sa router lang?
@@GedMej Legal ba yan? hahaha... parang hindi. Mahirap gawan ng bagong access point yan kasi iba iba ang sub net mask ng bawat provider. Yung static IP address na isi-set mo sa lumang router ay naka-base dun. Suggestion ko, bili ka na lang ng Tenda na router, kasi may dynamic ip settings yun. Kahit ano pa mask ng provider, si tenda na bahala mag-adjust ng IP address nya. Kapag lumang router kasi kailangan mo i-set manually ang IP address ng lumang router. Di uubra kung pabago bago ka ng provider. Ito mga Tenda router reviews ko, check mo na lang: * Tenda AC1200 AC5 Setup & Unboxing - th-cam.com/video/_A5_IxGBR34/w-d-xo.html * Tenda F3 Router - Setup Via Phone & Unboxing - th-cam.com/video/PrpTIlANvuk/w-d-xo.html
@@ribbytrivia yun ang di tayo sure haha pero parang legal nmn cguro, may permit ata sila ng NTC, nagssponsor pa nga sila ng events sa city kung san yung main office nila eh. Tinry ko to sa globe modem, gumana nmn. Itong pldt router lng parang ayaw, tas after ko ma configure parang hirap nako mkakonek sa pldt router.
Sir. I can't find the Lan settings. Please help 3:30
Do we have the same router model?
I'm having trouble logging in at 2:45 it says that wrong username or password
Have you enabled the admin stuffs shown in the previous steps?
goodpm idol, recomended ba na dapat nakasalpak ung rj45 sa main router? pde po ba e wireless sya?
Hindi po pwede wireless. Thru LAN cable lang pwede i-connect ang old router sa source router.
How about globe at home Gpon , i cant find dcph setting
Each router model has ots own settings menu. I don't have that model so I can't help you find it.
How about wireless extender na setup? Possible ba?
Nope. Even on mesh, yung main mesh mo kelangan naka-connect thru LAN. Yung nodes lang ang wireless
@@ribbytrivia ah ok. Noted boss
How to turn off the blinking red light?
Wala po bang paraan na matangal ang blinking red light ng LOS??
Nope. Since access point na lang sya, at di na direct sa provider ang connection, magbi-blink talaga ang LOS
@@ribbytrivia sir
may PLDT modem ako na disconnected which is gamit ko as wifi extender ng more than a year na. Ano po kayang problema? Bigla nalang siyang di gumana at nawala na ung blinking LOS niya then power and WLAN nalang naka open na ilaw sa router.
@@AldrinDelaPena-m2e Maraming pwedeng source ng issue nya. Pwedeng yung RJ45 cable, or may nabago sa settings, or yung modem na mismo, etc.
Isolate mo na lang muna.
- Try mo palitan ang LAN cable
- Try mo reset ang router at configure mo ulit
Kapag ayaw pa din, baka yung mismong router na may problem.
Salamat sa info boss. Tanong ko lang kung may limit ba sa speedtest na pwde nya maibigay? 400mbps kse yung need kung speed
Depende po yung speed sa specs nung router. Luma na tong model na to, kaya I assume hanggang 100MBPS lang kaya nya. Pero try mo din. Libre naman yan kasi luman router lang gagamitin mo.
d ba access point eto nde repeater?
Yes. Technically, repeater is wireless talaga. Pero mas widely known ang term na "repeater" vs. sa deeper technical term na "access point". Kaya I use the term repeater para mas madaming tao ang makaintindi ng purpose ng video 😉
It worked! Thanks man! I wanted to change the wifi name and pass but there is no "WLAN Settings" under the "Network" tab in the dashboard of the adminpldt account. And when I use the "user" account, the "network" tab is missing. Have u tried to change the wifi name and pass of this repeater? Thanks.
No, I had the same problem. The UI of this old rputer is weird
@@ribbytrivia Indeed its weird. Even the credentials sometimes changes itself for some reason. Oh well at least I got it working as a repeater. Thanks again mate!
Saw you replied 1 hour ago. thanks that you're still online. is there any way to share my pocket wifi's internet to the router using USB line?
Depending on the pocket Wi-Fi device. It will be difficult to share that through a router if it has no RJ45 (LAN) port, and since you mentioned "pocket", I assume there's none. But in a slim chance that there is a LAN port, I'm sure there's a way... just not sure how specifically, since I will need a that pocket wi-fi device to play around to find out, and I don't have any pocket wi-fi with me.
hi do you have tutorial to do the same on globe fiber modem?
None yet. If I get a chance to acquire that type of modem, I'll create one.
If works ..can i plug lan cable for the pc?
Yes you can
pano naman po kung ung main router is prepaid wifi..pwde ba gawing wifi extender ung postpaid na modem?
Pwede po. Basta sundan nyo lang yung unang 3 set na numbers ng IP address ng main router
2:09i can't login i tried to login in different browser even Firefox
Hi sir, do you have another superadmin credentials? That's the missing step I need.
Wala po e. Try nyo din search. Baka may bagong nag-publish. Indicate mo lang exact model ng router
Same issue.. i cant find it..😭
sir unang log in pa lang sa superuser di na gumagana ung copypasted na usr at pw na f~i
Malamang nabago na yan.
Hello, after 10 days of non-stop effort, I accidentally came across your video. It was great and useful. I also have a fiber optic modem model AN5506-04-FS, which works very well, but there is no signal on the other side of the house. I want to use an old TP-Link TD 8961ND modem as a repeater or signal booster of the first modem. But apparently the AN5506-04-FS modem doesn't support the WDS function or if it does, I can't find it. Please teach how to do it. thank you
Sorry, I have no TP Link router to practice with. Every router has difderent settings. But the main idea is to reset the old router, disable dhcp at assign a static IP that matches the source IP mask. Then you can just connect it through LAN cable and you're good to go
Sir the modem has connection when conneceted, haven't done the steps here pero meron na siyang connection. Problem is masyadong mabagal. Ano po pwedeng gawin?
Reset ang retry. Pag ganun pa din, baka yung old modem sira na talaga. But do note na lumang modem na ito. Yung max speed nya mas mababa compared sa latest modems ngayon. I think 2.4ghz lang din ang band nya, wala pa syang 5ghz band
I can't open the debug option
Ive connected to the router, however, it doesnt show the default gateway in ipconfig
additional info, it shows the mask being 255.255.0.0, normally its 255.255.255.0 right?
it also shows "disconnected : ip configuration unsuccessful" when I conncted my phone to it
Do we have the same.model? If yes, try mo reset na lang and repeat. Kung ganun pa din, baka sira na ang router
Can we use configure this on a smartphone?
Yes. Just make sure you are connected to the router's SSID.
hi. how to connect old pldt wifi router to other wifi connection without connecting lan cable?
You'll always need a physical cable connection. Even mesh system needs cable
Boss Ilan po speed nang main router niyo?
100mbps
Sir, I successfully modified my disconnected hg6245d into a extender. it is on bridge mode.
browsing and streaming is okay
but when I do ookla speedtest or download something and the speed is fast like 4mb/sec, the disconnected modem restarts.
The connection gets lost and ssid disppears from wifi list.
then after 15secs the ssid appears again as if the modem restarted.
Try isolating. Change the lan cable. Or reset and reconfigure. If it is still happening. It Might be an issue on the router itself.
paano mo na log in yong adminpldt sir? na try ko na both password mali parin.
@@jimmyvillaces2887 Direct lang yung password sa video, gumana naman. Basta di pa napapalitan ang password, gagana dapat yan.
can be a repeater even if main provider is globe?
Yes. Just need to follow the IP Address mask of the provider when setting the static IP (e.g. 192.168.1.xxx for PLDT, 192.168.100. xxx for converge, etc.)
pede po ba ko mag lagay pc or another router sa mga lan port after gawin yan ?
Pwede po
Salamat dito napagna ko ung lumang pldt fbr.., nice
You're welcome
So pwede hobang gawin ung lan 2 for another access point or para sa pc
Pwede
Boss bakit working akin kahit deritso na?
Nice! Di ko din alam. Yung DHCP kasi kadalasan nagko-conflict sa network pag di mo dinisable. Pero working naman sa yo... Ok na yan. 😁
boss, kung nareset na ang admin password dati wala na bang chance ma access pa?
di din kasi nag gana ung password sakin. thanks po
Kapag napalitan na ang admin password, tapos nalimutan, mahirap marecover. Di sya nare-reset e
@@ribbytriviaWhat if po napalitan tapos may record ng password. Ano po next gagawin? Ayaw po gumana saken
@@rainedeveraux2485 Sundan nyo lang po step-by-step yung video. Yan na mismo ang gagawin, wala na pong iba.
Saang part po ba ayaw gumana? Anong error? Wala bang signal? Ayaw maka-connect? Sobrang dami pong pwedeng maging meaning ng "ayaw gumana", kaya please be specific po.
Anyway, hindi naman po ako expert sa mga routers na ito. Ine-experiment ko lang din kung papano ko mapapagana. Kaya yung video, yan na po mismo ang alam kong way para mapagana sya. Kung sure po kayo na nasundan nyo ng tunay na step-by-step yang video, tapos ayaw gumana, baka po sira na ang modem.
@@ribbytrivia yung superadmin po
Thank you so much sir Big help for me, pldt rp2804 model no need to have a debut switch activate because I cant log in my router to that way, but its already have a signal thx
You're welcome
Sir, pwd ba to sa vlan setup na piso wifi.
Basta nakokonektahan ng LAN cable yung source ng internet mo, pwede yan
Sir do you have tutorial for globe modem model HG8145V5??
th-cam.com/video/iGEIqVOKmg4/w-d-xo.html
It's originally Converge, pero walang bearing kung saang ISP galing ang router. Basta same model, same process lang yan.
After reset and tried to reset again, the reset didnt worked. Can you help me on this one?
I don't know how else to reset. It's the only way I know. Maybe the router is already defective?
Mas malakas ba kapag gawing repeater yan?may 5g yan pa speedtest naman yung main router tas yung repeater din
Prepaid ba main nito?
Hindi. Fiber yung main
Lumang router na yan. 100mbps lang ata max nyan
@@ribbytrivia ayy, pag ganyan setup pwede ba prepaid main wifi nyan?
RP2631 Software ver. Ginawa ko na lahat yung step yet wala paring internet, pano kaya to sir?
Baka sira na talaga ang lumang router. Check mo videos ko about Tenda routers. Bili ka na lang ng ganun. Mura na router yun, at napakadaling i-setup
@@ribbytrivia boss Converge moden pwede po ba lagyan wifi extender ?
@@joshfrancisco7676 Pwede po. Same process. Mag-iiba lang yung IP Address mask. Susundin mo yung unang 3 set ng numbers ng IP Address ng Converge.
Pano naman po e access yung website ng router pag nagka internet na?
Kung ano ang IP address na sinet mo sa kanya, yun na.
Mayroon din ba superadmin nito para sa model AN5506-04-FA
Not sure. Naghahanap lang din ako sa google.
Gagana ba lods pag sa port hub isaksak ang connection ng repeater? Ty
Any sa LAN 1 to 4 (basta enabled ang port) will work
Hello nag work po siya pero paano ko po mapapalitan name ng wifi pati password ng router po na yon. Nag didirect na po kase siya admin ng main router pag nag 192.168 po ako
Access-in nyo yung routee config sa new IP na in-assign nyo sa kanya. Dun nyo palitan wifi SSID
same saken, ayaw gumana sa na assign kong IP, sa cmd ipconfig walang default gateway, awitssss
sir di ko mapasok yung sa super admin at yung sa adminpldt.. same modem po
Baka nabago na yan dati pa. Di narereset ang admin password
Boss pwede din ba magconnect ng pc jan sa extender?
Pwede po kahit ano i-connect. Pwede din LAN cable sa ibang LAN port nya. Normal na router lang sya. Kung ano nagagawa nung main, ganun din sya
sir nalogin ko yung super admin pero walang laman?
Ano ibig sabihin na walang laman?
Sir pwde po ba cellphone lang gagamitin sa pag set up? Ty
Pwede
Thank you sir. Okay na po❤
Sir anu mangyayari pag di na enable mga debug ?
Ano yung debug?
AN5506-04-FS
The super admin is incorrect, what can i do ?
Hi boss, salamat po sa tutorial, very helpful! God bless po!
Walang anuman po. God bless din!
Iniskip ko po yung enabling debug switches kasi di po ako makalogin. Diretso configure po sa adminpldt for dns at lan. Okay lang po ba yun? So far nagkainternet naman na po at mabilis ang speed. Thank you
Yes po. Ok lang yan
D napo ba mawawala Yung cignal NG pc pag ginawa poyan? Nagging no internet access kasi samin kahit Naka ethernet cable nman
Gagawa lang po yan ng extension ng signal ng wifi. Magdadagdag ng access point kasi iko-connect mo yung lumang router sa main router. Tapos yung lumang router magta-transmit din ng wifi signal. Walanpong kinalaman yan sa pagpapa-stable ng connection ng main router. Kung yung main router nyo no signal, or weak signal, same din makukuha nung naka-connect na lumang router.
Pwd po ba ma connect kahit anong wifi provider?
Pwede po. Kailangan nyo lang sundan yung format ng IP address ni provider
Pre bakit ung LOS red blink siya?
LOS ay connection ng provider. Since repeater na lang sya at wala ka nang connection sa provider, red na lagi sya
By the way thank you sa guide na repurpose ko rin yung router ko just now. May way ba para mawala yung blinking los? Kainis eh hahaha @@ribbytrivia
@@gamerspotph3161 You're welcome! Wala pong way na mawala ang LOS blinking. Ganyan na talaga sya habambuhay. hehe... Pwede nyo patungan na lang ng opaque na stickers or tape. Or patungan nyo ng glass figurine - parang aesthetics pa sya. hehe
hi dear . thanks for your education
I have a fiber modem and I could not do it according to the instruction you gave. There is a problem somewhere in my work, but I don't know where. can you help me ?
Well, I'd like to help, but that would be very challenging. First is the communication - it's easier to isolate the problem if I can see what you are doing. Second, if you yourself can't even identify what you did wrong, how much more to me? When I am not even involved in your process. And lastly, all the tutorial I can privide are in the video, which are limited only to the specific router I used. I am not an expert nor a router support person. I just experiment on the old router and share it in the video. It's just something I do on my free time.
Good luck though.
My suggestion is take a look at my videos about tenda routers. Just buy that router as they are very easy to setup.
@@ribbytrivia thanks for your reply . Do you allow me to contact you to solve my problem?
@@mahdiazimzadeh5412 As mentioned, this is just a hobby. It's not full time. Sorry.
Question lang po I followed all steps pero walang LAN settings sa config?
pldtadmin account?
Pwede po ba magamit yan para sa pc?
Yung pag setup ba? Pwede naman
Gagana po ba 'to sa same model but version RP2841?
Yes. Same concept lang naman kahit saang router. Nag-iiba lang sa settings menu/layout ng router
Di gumana super admin. May iba pa bang way para mapalitan DHCP nya ?
Kelangan admin talaga. Baka napalitan na ang admin password nyang modem dati. Hindi sya narereset
All 3 adminpldt passwords are not working. Please help
Sorry. That's all I have. Try to search for a new one.
Also, there's a possibility that your admin password might have already been changed. If so, that cannot be reset.
Sir pano po kpag WIRELESS CONNECTION REAPEATER KAYA BA
2 PO KSE UNG OLD KONG ROUTER NA PAREHAS NG MODEL SA VISEO NIU
Di po pwede wireless ang connection ng lumang router to source router. Pwede wireless kung mesh gamit mo, pero yung main node ng mesh mo kailangan pa din may wired connection sa source router
pwede ko ba gamitin itong model ng old router ng PLDT para maging wifi extender ng converge or globe?
Yes. Same process. Follow mo lang ang Ip Address mask ng source router
nung unang salpak po nmin ng lan cable gumana pero minsan hindinsya gagana kahit naka konek na no internet ...then i try this..error un and pw po.. pls help me
Baka po sira na ang modem. Try byo reset na lang at ulutin ang setup. Pag ayaw pa din, wala na.
Sir may idea kaba sa Converge Nokia router Model: G-140w-H
year 2021 d ko ma disable ang DHCP
Sorry. Di ko pa na-encounter yang model na yan
How can we connect this router as a extender wirelessly plzz tell😢
Wirelessly is impossible. Even on mesh nodes, which is intended to be wireless, you still need to connect the main node wired.
@@ribbytrivia Wired connection is working But Red light blinks internet connection is working only a red light problem
@@zaidlatifqureshi4542 If the red light is on the LOS indicator... that is fine. LOS indicates connection from the fiber line, which your old router obviously does not have, since you are using it only as an extra access point.
@@ribbytrivia Thankyou Bro ❤️
@@zaidlatifqureshi4542 no problem
Mga boss tanong lang, may PLDT modem ako na disconnected which is gamit ko as wifi extender ng more than a year na. Ano po kayang problema? Bigla nalang siyang di gumana at nawala na ung blinking LOS niya then power and WLAN nalang naka open na ilaw sa router.
Madaming possible na source ng problem... Pwedeng yung LAN cable, pwedeng yung router mismo sira na, o baka may na-corrupt/nabago sa settings. Try mo palitan ang rj45. Pag ayaw pa din, try mo reset ang router at configure mo ulit. Pag ayaw pa din... Baka router na mismo may problem
thanks for this video, modem is now a repeater for Globe Fiber hehehe
Nice! You're welcome!
di ako makalogin sa superadmin doon sa may ididisable
Kapag nabago na password ng admin, di na sya narereset
@@ribbytrivia so hindi na po pwde ma Access ganun?
@@jarrenaceret6358 Yes. Pag di mo na alam password, no way to access na.
You made a bridge or access point, not a wifi repeater.
I know
@@ribbytrivia the title says otherwise
@@QuestMajor Like I said... I know.
I made a business decision of putting "Repeater" in the title, as that is a more widely understood terminology, as compared to "Access Point" or "Bridge". I anticipated that the video will not catch the interest of most people if I put the deeper technical (but more accurate) term in the title - as what happens to most things as well. If it's too technical for most people to understand, they won't bother looking into it.
Consider this... as of writing, the video has 62k views, and you are only the 2nd person to correctly call out the inaccurate title. Out of those tens of thousands of people, only 2 of you. Repurposing the router to extend their Wi-Fi signal is more important to 99.99997% of these people, than to understand the correct terminology or the differences between Access Point, Bridge, Extenders, and Repeaters. Not all people, actually, most people watching my videos are not that technical to bother with these things.
I'm not saying that my title is correct because of these reasons... of course not. You're point is valid and correct, no doubt. I'm just saying that I don't see any value, especially to the audience and my channel, if I correct the title now.
@@ribbytrivia okay thanks for the misinformation for the sake of clickbait
@@QuestMajor Yeah... whatever keeps you in your high horse buddy. 🤣
I've explained everything on my side. I'm not sure if you even read or understood any of it, but that's on you. Aint nothing I can do about that.
Also, lookup the definition of "clickbait"... you might have a different definition of it. 😅
Sir. Pwd po ba Ito e flash to EPON?
Not sure. Di pa ako nakakapag-try mag-flash. Sorry
Idol, pwede ba yan gamitin as third party router para sa Converge?
Pwede! Yung IP subnet mask ng converge lang susundin mo = 192.168.100.xxx
Lahat ng ibang steps same lang
idol. 500mbps ung main router namin, pero etong extender, hanggang 100mbps lang parehong band at both mobile at pc. pano mafull speed?
Lumang router na yan. Kaya ang maximum speed na kaya nya ay 100mbps lang talaga. Yung hardware nya hanggang dun lang ang kaya.
Bili ka na lang ng router na kaya hanggang 500mbps or more, tapos yun ang gawin mong extender kung gusto ma-maximize ang speed
boss ask lng ako pano kung ung main router mo is prepaid wifi lang pwd bang gawing wifi extender ung postpaid na modem?@@ribbytrivia
@@sunghyunra1989 Pwede. Basta sundin mo lang yung unang 3 sets ng IP address ng main router mo para sa static IP ng extender.
Sir, naka log in na po ako sa superadmin pero blank lang po ang page. tinry ko na i-refresh ganon pa din po. pa help.
Sorry, di ko pa na-encounter yan. Try mo na lang i-reset ulit. Pag ganun pa din, baka sira na yung router mismo
Boss pwedi po ba to sa redfiber na router?
Pwede po. Same process, basta sundin nyo lang format ng IP address ng main router. Iibahin lang yung dulong number
Good day, sir! I followed the video po but I still can't connect. Sinundan ko po 3rd octet ni globe to PLDT with same model of yours po ayaw pa rin po. Help po.
It's hard to isolate the problem through comments. Make sure to follow step by step, and use the proper mask for the static IP.
é possivel transformar ela em epon?
English please
Is it possible to convert it to epon?
@@ribbytrivia
@@UnlockONTS Sorry, haven't tried that yet. Do let me know if you tried. :)
Access Error: Page not found
The request is illegal!
Pagnapalitan ba admin password yun na yung gagamitin hinde na yung binigay mo
Yes
Boss di Po guglmagana ang adminpldt na passwords. Anong workaround DITO?
Baka napalitan na password nyan? Try nyo mag-search ng ibang password.
Working Po ba pag globe Ang main modem?
Yes. Same process pero yung IP ng globe ang susundan mo na format para sa static IP ng lumang router
May ways pa po ba para ma access yung super admin na page sir? Username and Password Error! po kasi lumalabas
Sorry, kung napalitan na ang admin password, di sya narereset. Kelangan mo talaga alamin kung ano yung password, otherwise wala na talaga
Paano ilimit speed ng extender? Nahahati kasi speed ng main router eh, gusto ko mas malakas sa main
Depende sa router kung may settings na ganyan. Pero wala itong specific na router na to. Luma na to. Kung bagong model ang main router mo, mas mataas na max speed nung for sure compared dito. At di naman yan parang flow ng tubig na nahahati talaga yung speed. 😁 Baka may mg interference from main router mo kaya bumabagal.
You earned my sub. It works as of 12/04/2024. Now my room has a nearby wifi and a lan connection to my PCs. Thank you so much!
Thanks!
Help, i need firmware for support mode bridge, please🙏
Sorry, no idea where to get a firmware
none of the logins work, i have the same model used in the video
It was probably changed before. Admin accounts cannot be reset
After ko ginawa lahat yun tapos na change password nadin yung wifi puro Obtaining IP nalang pag mag connect
Baka sira na yung modem mismo. Try din i-reset ulit, at gawin lahat ng steps. Pag ganun pa din, modem na siguro talaga may problem
Try nyo i-reset ang modem at ulitin lahat. Pag same pa din, yung modem mismo baka sira na
@@ribbytrivia Same parin talaga sir puro Obtaining IP address after ma modify
@@EzklFlrs Baka yung modem na siguro talaga ang may tama.
boss pede ba gawin repeater yon ganyan na globe tapos yon wifi namin now pldt pa help po ty
Pede. Kung same model lang ng router, same steps lang. Kung ibang model, same steps pa din, pero baka iba ang settings. Ang idea lang ay (1) reset yung lumang modem, (2) disable dhcp, (3) assign static IP na tugma sa source - PLDT ay 192.168.1.X - yung X any number from 2 to 254 (4) Tapos. Saksak mo na sa LAN 1 from source.
yun pong ONU FIBER , USER AND PASS DEBUG SWITCH NG RP2931 . ANO PO ? SALAMAT
Di ko din po kabisado. Igu-google ko lang din kung sasagutin ko, kaya mas ok kung kayo na mismo mag-google. 😁 Hindi po ako expert sa mga routers. Nag-e-experiment lang din ako kung pano ko mare-reuse yung lumang routers.
kapag repeater mode, magagamit parin ba 5ghz wifi nya?
Yes
sir pano pag di pumapasok yung super admin
Baka may nagbago na dati. Di sya nre-reset e
Wireless repeater, kaya?
Kaya ng ano? Sorry di ako mind reader 😅 Ano ba gusto mong gawin? Libre naman mag-type dito... Pwede dagdagan ng impormasyon para mas malinaw 🤣
Gagamitin mo yung lumang router as a wireless repeater? Or may extra access point ka na tapos kokonektahan mo ng wireless repeater? Or tinatanong mo lanh kung papano at ano ang options for a wireless repeater? Or iba pa ibig mong sabihin?
@@ribbytrivia I think he meant those wireless repeater where said device connects to the main router without any cable.
Anyway, would your tutorial work If my main router is Converge?
Your superadmin credentials aren't working by the way, you should update your tutorial with these:
Username: adminpldt
Password: Mj5UI3OPr9vYq8bCxl1rV50E
@@yorib-a Thanks sa info.
About wireless repeater option - not possible.
It will work on any network. Kailangan mo lang sundin ang subnet mask nung source connection para yung static IP nya ay pasok sa IP ng source connection.
Thanks sa new adminpldt account. Add ko sa video description.
Paano po ito ma change pass ung wifi po? Kasi naka default po kasi e.
Wala na sa akin ang router kaya di ko na ma-test. Pero nasa settings lang yan nung router. Hanapin mo SSID
Hinde ko po ma access yung old pldt na router ko po, kasi yung IP po sa router ko is IP na po nong main router ko, paano po ma acces yong repeater(PLDT) ko po?
@@jcaureo2828 Ok lang po yun kahit same sila ng IP.
Wag mo muna i-connect ang repeater mo sa main router. Tapos Kelangan mo lang kumonek sa SSID ng repeater mo. Tapos punta ka sa browser, i-type mo na IP address nya sa address bar. Maa-access mo na settings nyan.
Okay po try ko po.
Hinde ako maka connect sa SSID nang repeater ko po, lagi nalng "obtaining IP address" ☹️. Help po
Bakit kaya failed to obtain ip address sakin?
Reset ang repeat. Make sure na napa-follow mo ang unang 3 sets ng numbers ng IP address ng source connection (e.g. 192.168.1 for PLDT)
good day sir, successful naman yung process, naging repeater/extender na yung Fiberhome HG6245D router. the problem is, after 40 to 45 mins, nawawalan na sya ng data, ano po kaya problem & solutions? thank you.
What do you mean nawawalan ng data? Yung connection napuputol? If yes, baka sira na yung router mismo
@@ribbytrivia yes sir, napuputol ang connection.. posible nga baka sira na router.
thank you boss!
Sir, pde ba gawin yung Phone usb tethering sa pldt fibr modem? baka my idea kayu sir, meron usb port kasi yung modem ng pldt fibr,baka pde yun smarphone maging source ng internet at isasaksak yung usb cable sa pldt fibr modem at enable yung usb tethering ng phone :)
Di ko pa nata-try yan. Pero luma nang model ang router na to. Malamang hindi pwede. Ang silbi ng USB ports ng router usually ay for Firmware update lang at pwede din gawing source ng 5V power.
Also, may sarili nang modem ang mga phone, pwede mo i-on ang hotspot, makaka-share ka na ng internet. Bakit papadaanin pa sa router?
ganto po ginawa ko pero may naka connect den na router dun sa router nawawala ang signal at bumabalik nman po
Bro wrong password when logging in to superadmin
Probably has been changed already. You cannot reset that when changed
Thanks for the video! I did it all and it worked. Although, now I want to change the name and the password of the AP but its not possibile to acces that admin login page on that standard IP anymore. Can someone help me?
Use the static IP that you assigned to the router.
The user has logged in somewhere else. Pls try again later! Yan po lagi lumalabas. Paano gagawin boss?
Kailan lumalabas yan? Anong part na ng step?
Kapag pinalitan mo na ang IP address ng router, yung bagong IP nya na ang access nya ha
boss pahingi ng SSID at WLAN Key, tinanggal kasi sa likod ng modem kaya di maka connect sa wifi, same tayo ng modem
Unique po yan per modem. Walang magkapareho nyan
tnx po...ung USB port sana qng paano paganahin, ikakabit ko kz ung printer q, para maging wifi printing na..
Di pwedeng gamitin ang USB ng router para mag-provide ng internet. Ginagamit lang yan for Firmware updates or kung gusto mo i-power ang device like fan
Idol pwede ba to kahit P2P yung main source?
Ano ibig mong sabihin na P2P ang main router? Di ko gets
@@ribbytrivia pano ba to haha, yung provider kase namin dito parang multi source sila, globe, pldt at iba pa tas yun yung dinidistribute nila saming customers nila. Ngmamatter ba yun or sa router lang?
@@GedMej Legal ba yan? hahaha... parang hindi. Mahirap gawan ng bagong access point yan kasi iba iba ang sub net mask ng bawat provider. Yung static IP address na isi-set mo sa lumang router ay naka-base dun.
Suggestion ko, bili ka na lang ng Tenda na router, kasi may dynamic ip settings yun. Kahit ano pa mask ng provider, si tenda na bahala mag-adjust ng IP address nya. Kapag lumang router kasi kailangan mo i-set manually ang IP address ng lumang router. Di uubra kung pabago bago ka ng provider.
Ito mga Tenda router reviews ko, check mo na lang:
* Tenda AC1200 AC5 Setup & Unboxing - th-cam.com/video/_A5_IxGBR34/w-d-xo.html
* Tenda F3 Router - Setup Via Phone & Unboxing - th-cam.com/video/PrpTIlANvuk/w-d-xo.html
@@ribbytrivia yun ang di tayo sure haha pero parang legal nmn cguro, may permit ata sila ng NTC, nagssponsor pa nga sila ng events sa city kung san yung main office nila eh.
Tinry ko to sa globe modem, gumana nmn. Itong pldt router lng parang ayaw, tas after ko ma configure parang hirap nako mkakonek sa pldt router.
@@GedMej Pag lumipat ka sa PLDT binabago mo din ang static IP ng lumang router? Ang PLDT dapat 192.168.1.XX
Not workin username and password it always said incorrect
Baka napalitan na ang admin password. Di sya narereset
Please help can log in both password