Thanks man, I'm trying to learn more about the software and it's hard to findo people doing that like you do!! If you can do more videos like that will be amazing... Thank you so much for that
@Palm Beach County Rider Hello , there's no free version, you can download 30 days for free but the full version it's paid. www.2020spaces.com/2020products/2020designlive/ $1,695 /Year
Normally the bottom of the upper cabinets are set at 54” off the floor. Generally you’re microwave should not drop below the cabinets. Check the manufacturer book for installation because it cannot be to far above the cabinet line as well depending upon the CFM from the blower.
You got it! it might seem intimidating at first but as long as you keep practicing you can get really good with it. try practicing on your free time 120x120 projects. That's honestly how I learned.
I need help! i just purchased 20/20 and my main issues are when i draw a wall i have to take time to make sure the wall is straight. Does it not just default to a straight wall? also when i place a cabinet i have to go slow and butt the cabinets to the walls, the cabinets are moving over the wall and not stopping when i drag it to the wall. Takes way to much time slowing trying to place the cabinets
@@Tyler-sk2rm there are help videos in 20/20 if you have support. If you just purchased than you should have support. Sounds like you have to set some parameters in the settings. I don’t have any of the issues you mentioned.
I'm learning 2020 on the free trial an can do a kitchen an learning but if I buy it do I really need the catalog or just use the free stuff I know what my cabinet company cabinet sizes are
They do have stock catalogs within the program that you can use. If you are selling cabinets all the manufacturers give you their catalogs as long as the make it for 20/20.
Hi, I have never used Microvellum before. Many years ago I used a program called Ashlar Vellum and it was very similar to Turbo Cad for drawing 2D and 3D. 2020 is industry specific because you import specific cabinet manufacturers into the program. This way when you do a 3D rendering it looks very similar to the final product.
I am still new to this program. How would you draw in a wall that is a half wall that goes to the basement with a ceiling that is the bottom of a set of stairs going up?
I’m not exactly sure of what you’re asking. To draw a half wall, just draw the wall then edit the height. On version 11 which is what I’m showing, you cannot add multiple floors with stair. Hope this helps.
Reckon this could be ran on a laptop with a RTX 3060 gpu? I’m looking for something so I can get this software at the moment. But I’m worried that the laptops will struggle to render it?
Thank you I’m new to kitchen design at my job and haven’t been given much training on this and I’m a little intimidated by it. Can you do another step by step please same 12x12 but with lots of storage space and a glass windows ? Please .. I wish there was a 2020 university because I could definitely use it. Thank you!!
Is this the newest version of 20/20? I’m trying to get back into kitchen design. I haven’t used the program since 2008. The place I interviewed at is worried it’s been to long since I used it and from watching the video it looks super similar maybe easier.
Hi thanks so much for this great idea & work you are doing. Please what is the name of the software you are using & how can I get it. I tried searching but it looks like I'm not getting the exact one you are using. Thank you
The company is 20/20 Technologies. The software is 20/20 Design. You would have to purchase from them, they are a Canadian company and to my knowledge they are the only ones who can sell it. The software requires a USB security device as well.
Hi, thank you for your video. When you work with a supplier, do they provide with the data for the cabinets and colours? I want to work with a few suppliers who have different products. How does it work?
Hello can you please do another tutorial to include a window, peninsula’a and an island with cabinets on one end? I just started working with 2020 and I want to become better but there’s no training available except your very helpful video, thank you so much.
Hello, how do I download the program with a copy that works forever without closing because I downloaded it more than once and it closes after a month, so please make an explanation to install the copy and if it is available to you how much is the price please
I'm not sure if there are copies but all the torrent versions don't really work anymore because they made 2020 a subscription program and each program can vary from 1600-3400 I believe. Dont quote me on that but after the first year its around $800 a year. It all depends on the subscription you pick.
hello is the software does it get up date all of the time ? can you put your pdf file for your colours for cabinets and counter tops are you in canada or us ? thank you wayne
If you want updates/ support. 20/20 requires you to purchase the support plan. We are in the US and it’s about 600 per year for the update/ support plan
Good morning! I've been working with Sketchup for all of my renderings. This is by far amazing. I understand the sizes and placement of cabinets what I want to work on is the backsplash and paint colors. Does this software have those options? I also know about the lighting for the mood enhancement, would you say that's easy to learn?
It does some room design for decorating options however there are much better programs for that. I have used Chief Architect and the design options were much better. The only problem with CA is the cabinet catalogs are not made for all cabinet manufacturers.
Kitchen Design 2020 or Design 2020. Google it , there is a free trial but its best if you're going to start designing kitchens to but the software .Best of luck !
Very helpful! What computer/monitor do you recommend for best resolution and speed? I need to update my laptop so want to make sure I get one that works well with 2020 Design Live. Thank you
Any large monitor is good. I use a 24” and have no issues. You should have a good graphics card. With a good amount of memory. When drawing in 2d you will not need it but in 3D you definitely will. You can look up their requirements on specs.
Thank you so much for the video I’ve learned a lot in the short video do you buy the software directly from 2020 ?? I would appreciate any information thank you so much great work
Hi Dave, amazing video on the 20/2 Design software . Do you think this software could run on a Mac if I install parallel ? and will you be posting more how to for beginners ? Today I found a job requiring this software and would love to learn it but I have a MacBook pro not a PC
Sorry, maybe I don’t really understand your question. We are not looking for any partners in our business. However we do have a client who purchases from us and exports to Cameroon Africa where he has a very nice business.
![A kitchen layout design guide [Where to start]](http://i.ytimg.com/vi/PP1_Mp1j-iQ/mqdefault.jpg)
![A kitchen layout design guide [Where to start]](/img/tr.png)
How do I install the software into my computer what’s the name of it
do you have $10k to buy it?
Thanks man, I'm trying to learn more about the software and it's hard to findo people doing that like you do!! If you can do more videos like that will be amazing... Thank you so much for that
@Palm Beach County Rider Hello , there's no free version, you can download 30 days for free but the full version it's paid. www.2020spaces.com/2020products/2020designlive/
$1,695 /Year
Yes sir thanks for the video, but can u please tell me the high from the stove top to the microwave is thank
Normally the bottom of the upper cabinets are set at 54” off the floor. Generally you’re microwave should not drop below the cabinets. Check the manufacturer book for installation because it cannot be to far above the cabinet line as well depending upon the CFM from the blower.
Tuned in because got a job BB hardware in millwork dept, they use this program it gives me anxiety! ty great simple explanation
You got it! it might seem intimidating at first but as long as you keep practicing you can get really good with it. try practicing on your free time 120x120 projects. That's honestly how I learned.
Nice tutorial. I just saw a job opening for this company. Looks like fun putting it all together.
I missed how you selected the countertop?
i am beginner but still u understand how to use i really appreciate your time put to gather
I need help! i just purchased 20/20 and my main issues are when i draw a wall i have to take time to make sure the wall is straight. Does it not just default to a straight wall? also when i place a cabinet i have to go slow and butt the cabinets to the walls, the cabinets are moving over the wall and not stopping when i drag it to the wall. Takes way to much time slowing trying to place the cabinets
@@Tyler-sk2rm there are help videos in 20/20 if you have support. If you just purchased than you should have support.
Sounds like you have to set some parameters in the settings. I don’t have any of the issues you mentioned.
Thanks so much Dave for your real quick response. God bless you
I'm learning 2020 on the free trial an can do a kitchen an learning but if I buy it do I really need the catalog or just use the free stuff I know what my cabinet company cabinet sizes are
They do have stock catalogs within the program that you can use. If you are selling cabinets all the manufacturers give you their catalogs as long as the make it for 20/20.
Hi, Thank you. Do you know what is the difference between 2020 and Microvellum? Is 2020 better?
Hi, I have never used Microvellum before. Many years ago I used a program called Ashlar Vellum and it was very similar to Turbo Cad for drawing 2D and 3D. 2020 is industry specific because you import specific cabinet manufacturers into the program. This way when you do a 3D rendering it looks very similar to the final product.
Great presentation, i just start learning 2020 design software. C
Thank you! I need to learn how to use this program I’m scared.
What year is that software? I have 2011 but that one looks way better then mine.
Great video I’m new to 2020
I am still new to this program. How would you draw in a wall that is a half wall that goes to the basement with a ceiling that is the bottom of a set of stairs going up?
I’m not exactly sure of what you’re asking. To draw a half wall, just draw the wall then edit the height. On version 11 which is what I’m showing, you cannot add multiple floors with stair. Hope this helps.
where can i find left side bar at 20/20 design i can't find it
You may have accidentally closed it. You should be able to get them back with the buttons on top. Then resize them to fit.
Reckon this could be ran on a laptop with a RTX 3060 gpu? I’m looking for something so I can get this software at the moment. But I’m worried that the laptops will struggle to render it?
Yes, I also run it on my laptop. You have to have a good graphics card.
If I want to use this to design my own kitchen is it possible to get a cheaper version?
Not that I’m aware of. You have to buy it directly from 20/20 Technologies.
Love this. Straight forward
Thank you I’m new to kitchen design at my job and haven’t been given much training on this and I’m a little intimidated by it. Can you do another step by step please same 12x12 but with lots of storage space and a glass windows ? Please .. I wish there was a 2020 university because I could definitely use it. Thank you!!
I’ll try to do more step by steps. If you purchase the yearly support it includes tutorials and help videos
Good day, where do I download or buy the program?
what is the name of this software? or do you know any good software to design kitchens for beginners please. thank you
The software is called 20/20 Design.
hell0 Thank you very helpful,,,i m having trouble with cabinets on render with different elevations
Amazing video, very helpfull
wow ! came out great !
Can you import PDFs to trace over to create kitchen plans?
Not that I'm aware of...
@@derrich773 ok thanks.
Hi, is it possible to make folding doors for wall cabinets? How can we make custom cabinets?
You would have to go to a custom cabinetmaker. I don’t perform full custom anymore.
@@derrich773 Thanks,
Just say the option to make folding doors
hi what is name of this course I want to do professional
It’s not a course, it software. The company offers training videos but you have to buy the software and sign up for the support program.
Do the cabinet sizes come preset or you have to save them?
Most are pre set by the manufacturer. Some can be edited on width, height and depth
Hi Dave, can you help someone learn 20/20 design.... or offer where I can get step by step guidance on learning this software?
Hi Man, How I get washing machine in this software?
It’s in the 20/20 technologies catalogue
@@derrich773 How Can I get these catalogue?
How much to buy this program?
You have to buy it directly from 20/20 Technologies it’s about 3k plus a yearly support plan.
Is this the newest version of 20/20? I’m trying to get back into kitchen design. I haven’t used the program since 2008. The place I interviewed at is worried it’s been to long since I used it and from watching the video it looks super similar maybe easier.
This is version 11. 20/20 has made it a little easier over the years. Under the support license they offer video tutorials.
Hi thanks so much for this great idea & work you are doing. Please what is the name of the software you are using & how can I get it. I tried searching but it looks like I'm not getting the exact one you are using. Thank you
The company is 20/20 Technologies. The software is 20/20 Design. You would have to purchase from them, they are a Canadian company and to my knowledge they are the only ones who can sell it. The software requires a USB security device as well.
I got stuck on the "UREP" wall next to fridge, can you please clarify?
UREP is universal refrigerator end panel. It is used to create a space to slide refrigerator in so you don’t see the side of the appliance.
Hi, thank you for your video. When you work with a supplier, do they provide with the data for the cabinets and colours? I want to work with a few suppliers who have different products. How does it work?
Not all manufacturers provide a catalog for 20/20. 20/20 does have a generic catalog but it’s much easier to use one provided by the manufacturer.
Where I obtain the licence software
You will need to purchase it through 2020 Technologies.
Hello can you please do another tutorial to include a window, peninsula’a and an island with cabinets on one end? I just started working with 2020 and I want to become better but there’s no training available except your very helpful video, thank you so much.
Hello, how do I download the program with a copy that works forever without closing because I downloaded it more than once and it closes after a month, so please make an explanation to install the copy and if it is available to you how much is the price please
I'm not sure if there are copies but all the torrent versions don't really work anymore because they made 2020 a subscription program and each program can vary from 1600-3400 I believe. Dont quote me on that but after the first year its around $800 a year. It all depends on the subscription you pick.
how to you buy the software? Thank you for the video great job!
You have to buy it directly from 20/20 Technologies it requires a usb security device.
how do i purchase this software?
You have to buy it directly from 20/20 Technologies
which app?
Whats the Apple 20/20 software equivalent? Do you know?
I’ve used Chief Architect on my IMac but most cabinet companies do not make catalogs for it. 20/20 will only work with Windows os.
What is the name of the aoo
hello is the software does it get up date all of the time ? can you put your pdf file for your colours for cabinets and counter tops are you in canada or us ? thank you wayne
If you want updates/ support. 20/20 requires you to purchase the support plan. We are in the US and it’s about 600 per year for the update/ support plan
Good morning! I've been working with Sketchup for all of my renderings. This is by far amazing. I understand the sizes and placement of cabinets what I want to work on is the backsplash and paint colors. Does this software have those options? I also know about the lighting for the mood enhancement, would you say that's easy to learn?
It does some room design for decorating options however there are much better programs for that. I have used Chief Architect and the design options were much better. The only problem with CA is the cabinet catalogs are not made for all cabinet manufacturers.
Does anyone have a link to the program?
The company who sells it. 20/20 Technologies. It’s a program that requires a security device to run. You need to buy it from them directly.
can this be use on a ipad???
No, only on a PC not MAC
Is 20/20 saftware free??
No, it’s about 3k and a yearly service/support subscription of 650 + a year.
Great video very information.
Nice tutorial. I would like to ask what software this is?
Kitchen Design 2020 or Design 2020. Google it , there is a free trial but its best if you're going to start designing kitchens to but the software .Best of luck !
Hello after you design it. Can you export dxf files for machining?
That’s a good question, to be honest I don’t know. I assume you mean for a CNC of similar.
Hi Dave yes for cnc router to cut the panels
Very helpful! What computer/monitor do you recommend for best resolution and speed? I need to update my laptop so want to make sure I get one that works well with 2020 Design Live. Thank you
Any large monitor is good. I use a 24” and have no issues. You should have a good graphics card. With a good amount of memory. When drawing in 2d you will not need it but in 3D you definitely will. You can look up their requirements on specs.
Good stuff man I also use 2020 software, thanks for the tips learned some new tricks 👌🏼
how can i get software 2020 design live cracked?
I don’t know. In order to use 20/20 you would have to have the security USB stick. Not sure if that is possible.
how much does such a programm cost?
Close to 3k plus like $600 a year for service and updates
Is that a grinder under the monitor lol
No, paper clip holder.
hello sir which version are you using? kindly response ....
11
App name
Thank you so much for the video I’ve learned a lot in the short video do you buy the software directly from 2020 ??
I would appreciate any information thank you so much great work
Yes, you have to purchase through 20/20 design.
Great video
Thanks
Outstanding
How much does it cost
The 20/20 software is a little over 2k to buy and about $600 per year for support and updates.
your the man
Hi Dave, amazing video on the 20/2 Design software . Do you think this software could run on a Mac if I install parallel ? and will you be posting more how to for beginners ? Today I found a job requiring this software and would love to learn it but I have a MacBook pro not a PC
I’m not sure, I don’t know what’s parallel is. 20/20 is designed for a pc and requires a usb security thumb drive. What videos are you looking to see?
Hello Kennia
Yes you can use it on IMac using parallel. I couldn’t figure it out I end up with Prokitchen software so far is ok a lot to learn
Tenho uma chave do Software e estou vendendo caso alguém se interesse!
Hi im harshad from india , can i start bussiness with you of kichen design.?
Sorry, maybe I don’t really understand your question. We are not looking for any partners in our business. However we do have a client who purchases from us and exports to Cameroon Africa where he has a very nice business.
Nice work!! Witch software do you use?
The software is called 20/20 Design
Nods head.....
App*
It’s a computer program called 20/20 design.
Very interesting!
Nice job. How much do you charge for designing something like this?
$250 deposit for that design. If they purchase the kitchen they receive a $250 credit. In the end the design is no charge.
Great video sub. And like. Goal is to become a sales rep
Can you design my kitchen? I pay you
i accept design for you
Apps name