Beautifully done. This video was a work of art. The classical music, the pacing, the ingenuity and clean tools, the efficient editing… chefs kiss. Well done
Beautiful job bro. I loved the calm music behind the subject at hand. Very detailed and straight forward. The only thing I could see improvement on, is the delay between rocket and shell. Increase the delay so your rocket can get to its peak/apogee before the shell explodes. Again, beautiful work.
@@PassfireRocket Thank you, I am going to make your tiger tails this evening. Do you have any videos of you making your rocket engines bro? If so can you link it here for me. Do you use a 75 kno3 15 char 10 Sulfur mix for your rocket powder as well?
For a rocket with header I use 60 30 10 But the ratio will depend on the specifications of the tool you are using th-cam.com/video/pEN8ABy6taY/w-d-xo.html
Hello, i use 1/2 id 4" long tubes 75 15 10 hot mix + 2 mineral oil 40g liquor thinner Its a nozzeless rocket And it lifted a 2.5 oz headed like crazy high! 1" delay from the spindle make 2 sec Same 75 15 10
Nice craftsmanship! Looks like your doing 8oz or 1 pound motors now? I think you need more increments of delay. What's your delay ratio? I slow my delay down by adding 36mesh charcoal. Other people will use 80mesg charcoal in their delay. So yeah, add more increments of delay, or use a slower comp. BTW, that was a nice break! Looked alot better than my most recent tiger tail header I did. Keep up the good work man!
Thank you. I'm using a 4oz rocket. I'm just using a thicker tube to support the heading. I used +6% nahco3 to 55 35 10 Rocket fuel. And 0.33 inch delay.
Went off of little too quick, after your delay did you Hammer in your plug? If not that's probably the reason for such a fast detonation after liftoff.
Can i use feO3? Instead of kno3 cause i pretty much have to make it from scratch. I found a way to get potassium carbonate but its not working good. Pure sulfur is hard too.
which flash do you use as a booster, 70/30 kclo4/al or 35/35/30 kclo4/kno3/al? and what ratio of flash granulated bp do you use? what ratio would you use with bp coated rice hulls
I use Nitrate Flash Because of unavailability of Kclo4. I use 1:60 Flash : BP Granulate I don't use rice hulls so won't be able to tell you the right ratio.
@@PassfireRocketnitrate flash is also more stable and less risky. No wonder you were to shake it around and easily dust it without any issue. That was scary for me but knowing its nitrate based makes me feel better
so how dangerous can a kno3 Sulphur mixture be? A boy died while preparing the mixture. he was hammering both together in a container, that caused a solid blast left him dad on the spot.
75/15/10 This formula makes gun powder.if l make rocket by this fuel the rocket will be blust.8/3/1 this formula for big rocket fuel.4/1/1 for short rocket fuel
@@PassfireRocket do you find unmilled burns at a speed good enough for only rockets? Or do you use unmilled for all other black powder related uses as well? I like that, because every body absolutely swears by it but to me I don’t see the appeal, I mean yeah… but eh
It was very interesting to see all the steps to make it and I LOVE the large golden streamers.
Thank you so much
Beautifully done. This video was a work of art. The classical music, the pacing, the ingenuity and clean tools, the efficient editing… chefs kiss. Well done
Thank you so much
The only pyro channel that plays awesome music with great videos!
Thank you so much.
I agree. It was a great experience to watch this 👍 i feel so calm 🙂
Beautiful job bro. I loved the calm music behind the subject at hand. Very detailed and straight forward. The only thing I could see improvement on, is the delay between rocket and shell. Increase the delay so your rocket can get to its peak/apogee before the shell explodes. Again, beautiful work.
Thank you bro
@@PassfireRocket Thank you, I am going to make your tiger tails this evening. Do you have any videos of you making your rocket engines bro? If so can you link it here for me.
Do you use a 75 kno3 15 char 10 Sulfur mix for your rocket powder as well?
For a rocket with header I use 60 30 10
But the ratio will depend on the specifications of the tool you are using
th-cam.com/video/pEN8ABy6taY/w-d-xo.html
seriously good experiment thank you brather
Thank you
Beautifully made video ❤️
Thank you
Hello, i use 1/2 id 4" long tubes 75 15 10 hot mix + 2 mineral oil 40g liquor thinner
Its a nozzeless rocket
And it lifted a 2.5 oz headed like crazy high!
1" delay from the spindle make 2 sec
Same 75 15 10
Well that's really cool bro
seriously good experiment thank u
A simple delay mix would help this
Ur so talented bro. Keep firing💥💥
Thank you
Why do you use Dextrin? I have used Dextrin for muzzle loader powder, and it burns dirty.
Its needed as binder
Музыка приятная...butifal music
Nice craftsmanship! Looks like your doing 8oz or 1 pound motors now? I think you need more increments of delay. What's your delay ratio? I slow my delay down by adding 36mesh charcoal. Other people will use 80mesg charcoal in their delay. So yeah, add more increments of delay, or use a slower comp. BTW, that was a nice break! Looked alot better than my most recent tiger tail header I did. Keep up the good work man!
Thank you. I'm using a 4oz rocket. I'm just using a thicker tube to support the heading. I used +6% nahco3 to 55 35 10 Rocket fuel. And 0.33 inch delay.
Beutifull ❤❤👏👏👏👏👏🇵🇰
@@adeelparwana1356 Thank You
So was the granulated black powder used as the fuel for the rocket or just the burst charge? And did you drill a hole all the way through?
Great music and great break!! Sadly didnt go high. Why would the heading be the problem? Isnt it the fuse delay or spolette the problem?
Delay was the problem
Hmmm better use time fuse next time. Great video.
Thx I wanted to know how to spiking threat on shell always I tried but is fail now you taught me...thx❤😊
Thank You
wonderful mate, love it!!!
Thank You
Went off of little too quick, after your delay did you Hammer in your plug? If not that's probably the reason for such a fast detonation after liftoff.
The delay mix was too hot.
Why isopropyl alcohol used in fireworks
Was that supposed to go like that .?
Did you use a nitrate or perchlorate based flash for your burst charge?
I used nitrate
A mixture of potassium chlorate and potassium hydrogen phthalate can be used
Tiger tail star thì KN03 có phải ball ko bạn
What type of that fine mesh is and what is it called?
100 mesh
Whats that piano in the outro so I can play it on Christmas
Nice demonstration bro. How to make flash powder?
Thank you.
And Flash Composition is,
Kno3 60%,
Aluminium 30%,
Sulphur 10%
Yeh flash crackers keliye yeh shell blast hone keliye
Can i use feO3? Instead of kno3 cause i pretty much have to make it from scratch. I found a way to get potassium carbonate but its not working good. Pure sulfur is hard too.
Well I have never tried it. But I don't think red iron oxide is a suitable oxidizer for black powder.
Is flash aluminium power? 17:26
Uns dos melhores foguetes que ja vi.
O seu KNO3 é purificado ou não?
Thank you. And it is firework grade KNO3
which flash do you use as a booster, 70/30 kclo4/al or 35/35/30 kclo4/kno3/al?
and what ratio of flash granulated bp do you use?
what ratio would you use with bp coated rice hulls
I use Nitrate Flash Because of unavailability of Kclo4.
I use 1:60 Flash : BP Granulate
I don't use rice hulls so won't be able to tell you the right ratio.
@@PassfireRocketnitrate flash is also more stable and less risky. No wonder you were to shake it around and easily dust it without any issue. That was scary for me but knowing its nitrate based makes me feel better
Do you coat the stars in regular Bp or granulated
Regular
Match box stik composition ?
so how dangerous can a kno3 Sulphur mixture be? A boy died while preparing the mixture. he was hammering both together in a container, that caused a solid blast left him dad on the spot.
Yes it is dangerous if the mixture is hammered
sir flash powder mine aluminum powder or 333 powder
Cara! Ficou muito top! 👏👏👏👏👏👏👏👏👏💥💥💥🎇🎇🎇🍀🍀🍀🍀💫💫💫
Thank you
Cho mình hỏi công thức lớp bọc bắt cháy hạt star của b được không?
Black powder+ 3% dextrin
@@PassfireRocket thế cho tôi công thức nhiệt chạm là cháy?
Is there a bigger explosion when it bursts so low in the sky? Does the rest of the thrust fuel blow up when it throws the stars?
What type of screen is that?
40 mesh
Everything is fine. Congratulations brother and thenks for sharing. Due to the CATO we couldn't enjoy the stares effects.
Thank You Sir.
Nice. I think u need a longer delay tho lol
Thank you. Yes it needs a longer delay I used a 0.33 inch delay. 0.5 inch delay or a slower Composition is needed.
@@PassfireRocket
Cato`s get the heart pumping, they are all part of the fun
@@colspyro 😄
Flast?
What is Batch?
Why is it yellow.. camera?
Yeah bro
Bhai which charcol you use for roket
Wood charcoal
@BholanathDas-d1m are which treee charcoal
Nice
Thank You
25% Isopropyl Alcohol tôi thay bằng xăng thơm được không
Tại sao ko ball mill mà nó cháy được ?
75/15/10 This formula makes gun powder.if l make rocket by this fuel the rocket will be blust.8/3/1 this formula for big rocket fuel.4/1/1 for short rocket fuel
4/1/1? Please explain in detail coz I wanna make a rocket for my school project
You can use a sugar rocket fuel (35% sugar & 65% potassium nitrate) for your school project
@@YogeshLonari-b6d I made it that way last year I wanna try something new this time
Depends which type of rocket it is. End burners works with hot fuel - 75/15/10. Core Burners requires slow burning fuel - 60/30/10
This mix is NOT rocket fuel, it is for the header. The display 'burst' please read before commenting.
Good
Thank you
What is BP sir?
Black powder
Sir,please make a video on rocket high speed fule .please sir.
Sure
What is BP
Black powder
Significade bp ???
Black Powder
Thuốc nổ đen phải không bạn
Remeber to add the delay next time, very good video otherwise 😊
Thank You
Make parachute rocket
How to make a flash
You can find the video in my channel
Bhai Chinese type roket composition batao
Don't used hot glue gun at the of closing of top side of the header,and you know why it brusting after taking its ist turn
Sorry i didn't get your question
❤
Break was way to low dangerously low.
Bom dia
Esplodiu. Meio baixo,mais ficou espetacular.
Showww
Thank You. Using a 1.5 inch Shell on 1/2 inch rocket would give it a higher height.
Low break
Quá nhanh
itna maara kar ke pura stars fotgaya upar jake 🤣
Hey I gotta question… did you use that granulated BP to launch your rocket? Unmilled?
I used unmilled rocket fuel. 55, 35, 10, not granulated.
@@PassfireRocket do you find unmilled burns at a speed good enough for only rockets? Or do you use unmilled for all other black powder related uses as well? I like that, because every body absolutely swears by it but to me I don’t see the appeal, I mean yeah… but eh
@@zach3096 Unmilled works fine. It could be relatively slower than milled. But as long as it does the job, why not.
@@PassfireRocket words to live by friend!
@@zach3096 😄