Thanks Very much for this video. I had to change battery on my Handsonic 10 and your video was an amazingly simple one. I fixed mine up. Wooo hooo thanks to you!
Thanks from Spain, your video helps me to reborn my eleven years old handsonic and it's very happy for me, thanks a lot and sorry for my hattest english.
Hattest* ? Don't feel sorry, I'm french and I struggle with spanish. But it's easier for us to learn english, which is quite simple, than for english speakers to learn a latin language. *el más sombrero ?
Thanks very much for this video . I've now successfully changed the battery . You've explained everything clearly ... I experienced a bit of confusion / difficulty removing the battery but persisted ala your instructions by pushing in firmly with a flathead screwdriver which helped the old battery pop out . The new replacement then fitted in easily ... Thanks again , the video has been extremely helpful .
Thank you Mr Strawberry! My my Handsonic 10 is happy again! It took me about as long as your video to swap the battery. One tip I have is to be sure to reduce the torque to a minimum setting before installing the screws or screw them in by hand, so you don't damage the threads. Some folks might not think to do that and then :(
vielen dank, danke fürs Zeigen wie mnan die Bat. einlegt/rausnimmt. Auf der Webseite wurde empfohlen einen Techniker zu rate ziehen (das hab ich woilh mit diesem video) aber machte mich skeptisch... ist ja nur eine Batterie habe ich gedacht. Danke! dank diesem vid. wusste ich es ist keine Zeitverschw. es einfach selbst zu erledigen
I changed the battery leaving the DC on, wearing gloves of course, but I got the message "memory damaged". Reset ? OK. It was worth a try. Buy a battery diameter 20 mm. 16 screws to remove the hood ? These guys are not joking.
Hi Erdbeer, thanks fr the video! I have a question for you, the battery "Duracell 2032" is fine for this replacement? Can all types of 3 volts batteries be used? Thanks
I'm not ab battery expert, but since the one I found in the handsonic as well as the one I replaced it with is labled as 2030 I am pretty confident that your duracell one will also work. Other 3 volt batteries should theoretically work as long as they provide at least as much amps as the 2030 ones. (And if you are able to connect them properly.) Lower amps may or may not work. As long as you don't use a higher voltage than 3 or connect some AC source experiments should not be harmfull to the handsonic as far as my electrical knowledge goes. But as I said: I'm not an expert. If you fry your instrument it's on you. I suggest just using one labeled 2030. :)
In fact it does! It's just that because sound doesn't travel through the vacuum of space, Georgy Lucasson wasn't able to record the real thing. So he decided to overdub it with a fantasy sound design.
awesome thank you so much for this video. I have some questions. Is it normal to get that "Memory damaged" error message after replacing the battery? If I understand correctly in order not to lose my presets just replace the battery fearing turned on the device? Is the battery the Cr2032 model?
I won't guarantee it, but as I said it should be possible to change the battery without loosing your data as long as you keep the device plugged and turned on so the memory gets powered. It is probaly also possible to backup your patches before changing the battery via sysex but I don't know how or to do it if it is possible.
Hey Chnucki - I didn't even know this was a thing until I turned on my HPD10 just now and almost had a heart attack. Now the question is: Do I do this now and hope for the best, or wait until after wednesday's gig and hope the battery survives until then...? Hmmm... scary either way. Thank you so much for walking me through this and keep up the great work :)
As far as I understand it is also possible to save all your presets via midi into a sequencer as a form of backup. Search the manual for "bulk dump". I did never do this, but it should provide you with additional security. :)
I didn't open mine, but here's what I'd try: If you unscrew the circuitboars, you should find the buttons to be of the rubberdome kind. Look at those for any phyiscal damage. If you find any, fix them by improvisation. :) Generally also clean the rubberparts and the contacts with some cleaning alcohol. (Keep away from WD40 if it comes to circuit boards if you thought about that.) Hope that helps. :)
Ich habe die Handsonic seit etwa 15 Jahren und mir war bis vor kurzem unbekannt, dass sie eine Batterie hat. Musste sie heute tauschen, danke für dein Video als Anleitung. Falls du einen guten Tipp hast wie man aus diesem Gerät als Midi Controller noch mehr rausholen kann wäre ich sehr dankbar. (Links, Software, Plugins, experimentelle Ideen,etc) LG, Holger
Hi Chnucki, This looks promising to me. I have a HPD10 and the digital display is frozen with all characters, doesn’t change with input. The sounds and pads are working however, but I can only navigate blind! I didn’t ever see the “low battery” on the display before the issue. One day I turned it on and the display was locked and frozen. Do you think this could be a battery issue?
@@yashchandra8959 LCD Contrast: 1.While holding down the SHIFT button, press EDIT] 2.Use until you see SYSTEM in the display 3.Press the buttons, and here you see: LCD Contrast
Sorry. The battery is a small cylindrical cell with a diameter of 2 cm and a height of 3mm. It has to be put into the socket so the side with the engraved type specifications is up. Here is a link to the spec sheet of a compatible battery: data.energizer.com/pdfs/cr2032.pdf
![[Live] : ONE 167 วันนี้!! "ตะวันฉาย vs โจ"](http://i.ytimg.com/vi/D9_dvfIa6Ao/mqdefault.jpg)
Thank you for sharing this....easy to follow and worked like a charm!!
Thanks Very much for this video. I had to change battery on my Handsonic 10 and your video was an amazingly simple one. I fixed mine up. Wooo hooo thanks to you!
Thanks from Spain, your video helps me to reborn my eleven years old handsonic and it's very happy for me, thanks a lot and sorry for my hattest english.
Hattest* ? Don't feel sorry, I'm french and I struggle with spanish. But it's easier for us to learn english, which is quite simple, than for english speakers to learn a latin language.
*el más sombrero ?
Thanks very much for this video . I've now successfully changed the battery . You've explained everything clearly ... I experienced a bit of confusion / difficulty removing the battery but persisted ala your instructions by pushing in firmly with a flathead screwdriver which helped the old battery pop out . The new replacement then fitted in easily ... Thanks again , the video has been extremely helpful .
thank you! clear and concise instructions
Thank you! Mine is back to life and i feel like a real engineer now!
Thank you Mr Strawberry!
My my Handsonic 10 is happy again! It took me about as long as your video to swap the battery. One tip I have is to be sure to reduce the torque to a minimum setting before installing the screws or screw them in by hand, so you don't damage the threads. Some folks might not think to do that and then :(
A thousand thanks!
Great video! Super helpful (particulalry the tip on how to not lose all your personalised settings!)
vielen dank, danke fürs Zeigen wie mnan die Bat. einlegt/rausnimmt. Auf der Webseite wurde empfohlen einen Techniker zu rate ziehen (das hab ich woilh mit diesem video) aber machte mich skeptisch... ist ja nur eine Batterie habe ich gedacht. Danke! dank diesem vid. wusste ich es ist keine Zeitverschw. es einfach selbst zu erledigen
Thank You Sir , that was a great help to me.
Super, vielen Dank, bei mir hätte es ohne das Video auch am Ausbau der Batterie gehakt....
Thank God for your video Sir!
Thank you very much your video was very helpful
Thanks! You saved me!
thanks you very much, so clearly explained so easy.
100 % Problemlöser! Vielen herzlichen Dank!
Thank You for your Help! 🙏
I changed the battery leaving the DC on, wearing gloves of course, but I got the message
"memory damaged". Reset ? OK. It was worth a try. Buy a battery diameter 20 mm.
16 screws to remove the hood ? These guys are not joking.
Milles mercis, je vais pouvoir remplacer ma pile , moi même.
J’ai vraiment besoin de mon handsonic.
Encore merci.Lucie de St-Hubert, Québec, Canada.
Thank you!!!
Ty man🥁🥁🥁🥁🥁
Thank you very much 😊
Very helpful.
Hi Erdbeer, thanks fr the video! I have a question for you, the battery "Duracell 2032" is fine for this replacement? Can all types of 3 volts batteries be used? Thanks
I'm not ab battery expert, but since the one I found in the handsonic as well as the one I replaced it with is labled as 2030 I am pretty confident that your duracell one will also work. Other 3 volt batteries should theoretically work as long as they provide at least as much amps as the 2030 ones. (And if you are able to connect them properly.) Lower amps may or may not work. As long as you don't use a higher voltage than 3 or connect some AC source experiments should not be harmfull to the handsonic as far as my electrical knowledge goes. But as I said: I'm not an expert. If you fry your instrument it's on you. I suggest just using one labeled 2030. :)
To me it does not sound like the Millennium Falcon at all
In fact it does! It's just that because sound doesn't travel through the vacuum of space, Georgy Lucasson wasn't able to record the real thing. So he decided to overdub it with a fantasy sound design.
awesome thank you so much for this video. I have some questions. Is it normal to get that "Memory damaged" error message after replacing the battery? If I understand correctly in order not to lose my presets just replace the battery fearing turned on the device? Is the battery the Cr2032 model?
I won't guarantee it, but as I said it should be possible to change the battery without loosing your data as long as you keep the device plugged and turned on so the memory gets powered. It is probaly also possible to backup your patches before changing the battery via sysex but I don't know how or to do it if it is possible.
Hey Chnucki - I didn't even know this was a thing until I turned on my HPD10 just now and almost had a heart attack. Now the question is: Do I do this now and hope for the best, or wait until after wednesday's gig and hope the battery survives until then...? Hmmm... scary either way.
Thank you so much for walking me through this and keep up the great work :)
As far as I understand it is also possible to save all your presets via midi into a sequencer as a form of backup. Search the manual for "bulk dump". I did never do this, but it should provide you with additional security. :)
@@RoideJaneiro Oh that's interesting, I'll take a look at that option, thank you once again! :)
Hey, great tutorial. My handsonic 10 is not turning on. Could it be because of faulty battery?
Probably not. The battery is just so presets can stay stored.
@@RoideJaneiro thank you for the response .The ac adapter was at fault not the battery.
My handsonic 10, Kit button is not working, i can use only bank patchs. Please let me know what i can do?
I didn't open mine, but here's what I'd try: If you unscrew the circuitboars, you should find the buttons to be of the rubberdome kind. Look at those for any phyiscal damage. If you find any, fix them by improvisation. :) Generally also clean the rubberparts and the contacts with some cleaning alcohol. (Keep away from WD40 if it comes to circuit boards if you thought about that.) Hope that helps. :)
Hi Chnucki, my old battery won't "push in" to release and take it out....Any ideas?
Got it! Thanks (actually, my wife did :) ) Great video!!!!
@@jimcopeman7198 Congratulations for your wife choices then. :)
Ich habe die Handsonic seit etwa 15 Jahren und mir war bis vor kurzem unbekannt, dass sie eine Batterie hat. Musste sie heute tauschen, danke für dein Video als Anleitung. Falls du einen guten Tipp hast wie man aus diesem Gerät als Midi Controller noch mehr rausholen kann wäre ich sehr dankbar. (Links, Software, Plugins, experimentelle Ideen,etc) LG, Holger
Hi Chnucki,
This looks promising to me. I have a HPD10 and the digital display is frozen with all characters, doesn’t change with input. The sounds and pads are working however, but I can only navigate blind!
I didn’t ever see the “low battery” on the display before the issue. One day I turned it on and the display was locked and frozen. Do you think this could be a battery issue?
The fix was easy. Had to adjust the contrast buttons!
How can I adjust contrast? I have the same issue. Tx
@@yashchandra8959 LCD Contrast: 1.While holding down the SHIFT button, press EDIT] 2.Use until you see SYSTEM in the display 3.Press the buttons, and here you see: LCD Contrast
@@yashchandra8959 Short Cut for Changing the ContrastPress and hold down the KIT button, and use the
[+]/[-] buttons.
preciso desse video em portugues. A minha esta com esse problema
Conseguiu resolver o problema?!
Olá vcs conseguiram trocar a bateria. Eu não troquei ainda, mas os meus kits que eu havia personalizado foram perdidos. 😢
Di mn tuh bellinah
No zoom on camera. Never saw the battery. ZOOM!!
Sorry. The battery is a small cylindrical cell with a diameter of 2 cm and a height of 3mm. It has to be put into the socket so the side with the engraved type specifications is up. Here is a link to the spec sheet of a compatible battery:
data.energizer.com/pdfs/cr2032.pdf
Thanks for the info but this video is painful to watch. Holy cow that could have taken like 30 seconds to explain