We Gave it MORE BOOST - 10 psi And MAJOR Suspension Updates UPR Anti Roll Bar Installed!
ฝัง
- เผยแพร่เมื่อ 16 ม.ค. 2025
- Well we looked at what we did at FL2K and we decided to put in some major work on Project Hurricane our 2012 Ford Mustang 3.7L V6 Mustang Drag Build. So we changed the gears from 4.11s to 3.08s, and we added a UPR Anti Roll Bar, as well as a Panhard Bar Brace, and we adjusted all of our suspension and the pinion angle as well.
Then we changed the Wastegate Spring to a 10 psi spring and sent it for a rip on the dyno.
Buy Your Performance Parts From the Mafia: automafiaracin...
Facebook: / automafiaracing
Instagram: / automafiaracing
We use TH-cam Buddy to help our Channel: www.tubebuddy....
#AutoMafiaRacing #PartsPassionPerformance #AMRorDIE #MafiaTuned #VeteranOwned #JoinTheFamily
Auto Mafia Racing LLC, and Auto Mafia LLC are in no way telling you to attempt these mods, or to drive, or do what we do. Please consult a professional mechanic prior to doing any work on your vehicle. We will not be held liable for any actions taken due to the viewing of these videos.
Tags: Auto Mafia Racing Auto Mafia Drag Racing Parts Passion Performance Dyno Tuning
We are headed to the track! Free T-shirt to whoever can guess our MPH or ET correctly to the hundredth.. so 10.XX and / or 95.XX mph so 2 possible winners!!!!
9.97 sec / 122 mph
10.19
10.23
10.3 at 140
So who won lol? Was it the 1st pass or best pass to guess? 10.317 at 128 or 10.4 at 135?
Kings of the 3.7's. You guys are doing great things!
Haha thank you
Send it!!!!
I dont know how to do it any other way
Auto Mafia Racing that’s right 😂
10.02
, would say in the 9’s but the longer gears will the the time a little bit more than I think 331’s would
we will find out! We have NO idea tbh
How did you decide that 3.08 gears were the optimal setup? Seems a drastic change from 4.11's.
We did the math and wanted to hit 175 mph in the top of 4th
@@automafiaracing nice!
How is turbo lag on this? Im heavily weighing an ecoboost conversion for my 3.7 as well as procharging my mustang. My only issue is the turbo lag if im looking more for an autocross setup that can hold it own against a gt500 on a strip (doesnt need to beat)
Non existent when over 3k rpm.
It’s that possible can a ciclone do 10 seconds better than 2020 Gt 500 10.6
We ran a 9... so ya
wow that's awesome amount of power from 3.7! is it on stock internals?
Yes that's a stock sealed motor and only 10 psi. We will turn it up later
How reliable is this with 10 psi for DAMN 580WHP BIG TURBO? HOW LONG DID YOU DROVE IT BEFORE IT BREAK? HOW HARD YOU DRIVE REGULARLY? YOU ARE THE BEST 3.7 V6 GUY EVER
This is a track only car.
10.01 @ 136mph
Soon
9.85 @ 131MPH
Man you guys thought it was gonna haul booty
Lol Shit!!
10.3 @ 128
You sir are good.
I just took a guess I'm blown away that I was so accurate 😂
I should've played the lottery 😂
9.97 sec!!!!
If only
10.0 @ 134
check the next video. Lil low.
@@automafiaracing will do - loving the build so far.
more coming
So basically the car just freaked out your dyno and blew your boost gauge
The coil packs are triggering noise that kills your boost gauge and it sends rog signals to the dyno causing all kinds of shit to malfunction.
We see that a lot on COP ( coil on plug ) that are starting to fail, or boost sensor placed too close to a coil pack.
You're welcome
Shan - Diago'sCustomTuning
DC box on the dyno failed
122 mph
lil low
9.94
That would be quick
So who was closest, and what did it run?
124 mph
close but youre low