Nice job Steve. All these other videos show how to solder when the pipe is free to move. Like a demo on a workbench. Yours showed a typical tight spot fix when the pipes don't move. To the point and clear.
Great job. I will be doing this to fix my good tree sprayer when I have time. I'll have to figure something else for now, because I have to get them sprayed before they bloom. Have a great day!
That slip coupler is saving me big bucks repairing a brand new Taco air scoop whose crap threads will not seal to 1-1/4 adapters. Good sealant, good torque (by feel of course) but I suspect Taco's full paint job on the threads messed up the sealing. One drop every few minutes.
you know steve , you need another baby dog to keep baby dog company when your working. can't wait to see that video with all them dancing feet Ha Ha !!!!
From your experience how long would soldering flux in plastic container stays good? 5 years, 10 years till it's dries out? when do you need to buy new one? Thanks.
Beach/summer house which has no heat and that is why he has shutoffs to drain pipes. He must not have drained that pipe properly before closing for the winter.
I am so confused! instead of cutting and removing the copper pipe that was damage, why didn't you just clean the area where the slit cut was at and then just solder it with the flux?? You didn't have to remove the pipe, just solder the piece that was cut open!
That's a big gap.. the flow of solder due to gravity may not give it a solid piece that covers the slit. This is the proper way to do it though a bit more work. Another way is to wrap the split with copper wire tightly an solder the entire wrap; again it is not the proper way to repair a bad weak point on the slit.
Your dog was trying to tell you that it needed to go potty badly! Next time please get your dog outside of your van before you go to your next job, just trying to help you understand what you're dog is trying to tell you 😃👍♥️...p.s. you would be dancing too if you had to go to the bathroom and you where chained to your vehicle all day long!! Come on dance for US! "NOT SO CUTE NOW HUÚU?" You shut up!!!!!
![เปิด อาณาจักร หมื่นล้าน "สาระตั้ม" l [Nickynachat]](http://i.ytimg.com/vi/3XE0nPF4YkQ/mqdefault.jpg)
Thanks Steve, your videos got me through my alcohol addiction.
Nice job Steve. All these other videos show how to solder when the pipe is free to move. Like a demo on a workbench. Yours showed a typical tight spot fix when the pipes don't move. To the point and clear.
Good video, had a similar issue recently.
Your video helped alot.
Thanks
3:12 yelling at the dog. “Shat app!”
😂
I love the video and your soldering job. No wall damage. A true professional!
I watch your video when I wake up in the middle of the night. They comfort me and I feel good. Thanks, buddy.
Ahhh, A slip joint, I was wondering how I was going replace a pvc union connecting copper to copper, thank you to you and the dog!
Thanks for getting some shots of the grinding wheel Steve. I'm going to pick some of those up online. Great repair and great video!
The disk grinder is a nice touch and far better than going at it with a Sawzall.
The gundy was astronomical. Another beauty Steve!
+Lex Vance thanks for watching
Thanks! This was a perfect refresher and exactly what I needed. “The slip”
Great job. I will be doing this to fix my good tree sprayer when I have time. I'll have to figure something else for now, because I have to get them sprayed before they bloom. Have a great day!
Nice repair Steve! Felt good seeing Baby at the end too! :)
That slip coupler is saving me big bucks repairing a brand new Taco air scoop whose crap threads will not seal to 1-1/4 adapters. Good sealant, good torque (by feel of course) but I suspect Taco's full paint job on the threads messed up the sealing. One drop every few minutes.
Nice work, Steven. The baby dog getting her 2cents worth in. Funny!
Thanks for this video. First one I found that showed how to make the repair when there's no movement in the pipes.
Good job, Steve.
"Shaddup!" - love it!
Nice you didn't have to work off a ladder, looked like an easy job. Good job. No trolls on this job. LOL Thanks
Watch your fingers with that grinder! 😥. Nice job man 👍
thumbs up for baby dog
Funny with the dog action !!! Thansk good laugh !
Pipes still freezing even now out there? You got great control of torch Steve. No scortch mark on wall!
This is hilarious. Yapping little dogs in the background: “Shut up!” I love it. Thanks so much for this vid.
Not funny that poor dog needed to go potty
And shut up! Really now!!!
Next level repair Steve
Excellent repair Steve
"She nek level, the baby dog, got the lil tongue action, she a proud master hvac technician.... oooohhh mamah!"
Dog: Proceeds to do the doggy dance
Needs to go potty
Excellent work Steve. Great job on the video.
Nice job Steve, nice garage. Congrats on First again! LOL
Nice! I would’ve placed a fire preventer pad behind the pipe.
awe the babydog want some attention , great vid again Steve , how tight ! Jamie
Nice job Steve.
nice easy one ... nice repair steve
thanks, this was super helpful
Isn’t that more efficient to start from the bottom and work your way up when soldering ?
you know steve , you need another baby dog to keep baby dog company when your working. can't wait to see that video with all them dancing feet Ha Ha !!!!
Great work Steve !!!! I'm wondering what blade you use on your grind to cut the pipes ? Thank you and keep up the great work !
+William Hall
Nevermind sorry i should of finished the video lol !!!
had to fix one the other day great vid steven
Good repair man, guess they forgot to drain?
Always great work.
MOM!!!!! STEVES WORKING AGAIN!!!! LOL...
Torch placement is key , not even a scorch on the wall , "STEVE IS NEXT LEVEL MAMMA " MASTER TORCH TECH oh ya !!!!
Nice repair.
+Gary B thanks
Did they ask for chrome pipes? Shocking soldering that
From your experience how long would soldering flux in plastic container stays good? 5 years, 10 years till it's dries out? when do you need to buy new one? Thanks.
Why do all these houses have outside showers? I see em on beach houses for washing sand off but I can't figure why you have em up north.
Beach/summer house which has no heat and that is why he has shutoffs to drain pipes. He must not have drained that pipe properly before closing for the winter.
Woof woof woof wooof.....SHADDAP! 👍🏻😂
Steve, I usually do repairs on coil splits by tapping the split closed, and using silver solder (Silfos). What are your thoughts on this?
11:54 I'm always curious what he's saying. Is it nigloo? I can't figure it out but it's a fun word, not really sure what it means either
next level
Those damn dogs! 😂😂😂
Love that Doggy.
Good job
Hey Steve from NY
i dont buy slide couplings. i just get stop couplings and keep a rat tail file. just takes 4-5 seconds
My next house I'm building an outdoor shower
+Michael Padovani you have to winterize it if you do have one .
+steven lavimoniere Or live in Florida, like I did. LOL Miss that mild winter :(
Is the green patch on your dog from R.S.E S.! I'M A 20 YR MEMBER!
ya she passed the exam
Ya looks like a heat pump patch ,like I have!
My ears died 6.20
first mama
next level
Hilarious with the dog. Shut up! Hahah
Not so funny
awesome!
Baby sounds bigger than she looks.
Thanks
could not hear when you whisper
the dog is dance oh yeah.
I am so confused! instead of cutting and removing the copper pipe that was damage, why didn't you just clean the area where the slit cut was at and then just solder it with the flux?? You didn't have to remove the pipe, just solder the piece that was cut open!
That's a big gap.. the flow of solder due to gravity may not give it a solid piece that covers the slit. This is the proper way to do it though a bit more work. Another way is to wrap the split with copper wire tightly an solder the entire wrap; again it is not the proper way to repair a bad weak point on the slit.
Dogie dance hahahahaha...
Why do you wear gloves ?/ ( just jiveing )
Your dog was trying to tell you that it needed to go potty badly! Next time please get your dog outside of your van before you go to your next job, just trying to help you understand what you're dog is trying to tell you 😃👍♥️...p.s. you would be dancing too if you had to go to the bathroom and you where chained to your vehicle all day long!! Come on dance for US! "NOT SO CUTE NOW HUÚU?" You shut up!!!!!
Nice video Steve how is the generator coming?
+jm69charternet i am working on editing the last one . probley be out today i hope
MOM!!!!! STEVES WORKING AGAIN!!!! LOL...