Thank you!! I had a panicked moment thinking my clothes were all locked in and this solved my issue. I’m 99% certain it was caused by my cleaner who didn’t close the drain cap correctly after cleaning, it resulted in the washing machine leaking on the outside, so inside makes sense too with the seal not covering inside if it isn’t fully closed. I can not afford a call out right now so being able to ‘fix’ it even if it’s only temporary is a big relief!
Thanks for the help. Turned out that the rubber drain pipe had a hole in it due to it rubbing. I just cut it off and made it shorter. Easy fix and money saved.
Thanks so much, solved the wrong code in 5 min according to your video. Very easy to follow your instructions. Think the code or the water came because the dampers are worn (ordered new 5 days ago) and today I got the AE code wrong. Now it works again, did not look for dripping water as I know that the dampers are the cause (lowered the centrifuge speed to 600-800) and there were some extra small stones and other shit in the collector. THANK YOU SO MUCH AGAIN!
Hi Mr Washy Washy, your video is the best by explaining what AE actually is. Unfortunately, mine is a LG Top Loader 10.5 KG. The bottom part is very different. If you have a Top Loader video that show how to fix this AE issue will be life saver. My country is on lock down. Electrical service shops are all closed... :(
Hello sir please we change the gasket rubber on it but the one we put there is not the same as the one came with,firstly the new one we put back the have a big hole on top.. i dont know maybe that's the cause @@askmrwashywashy
Thanks so much for this video 👏🏻 You’re a lifesaver！I managed to rescue my laundry and at least complete the washing cycle without it trapped inside the washer!
Thank you so much, because of you now I can add washing machine repairer on my resume 😊 I followed exactly your tutorial and it was a gem Thank you thank you thank you for saving me dollars
Thank you for this video. I can now add washing machine repair to my mum/wife resume. I suspect I need to replace my float sensor as the contacts appear to have some corrosion and is still tripping even when the float isn't activating the switch
Hi there, this video has been super useful to see where the leak is, but I’m not sure how to fix it and what the problem is with my washing machine. There is a leak from just above the mother boar, leak from the plastic material inside towards the front that is the same colour as the mother board.. could you please help Me? Thanks a ton 😊
KAREN FASHAW VERY WELL DONE BUT I HAD AN AE ERROR CODE BEFORE AND I JUST SIMPLY SWEGG THE HOSE BACK AND FORTH IT WORK FOR A COUPLE OF YEARS NOW IT IS BACK AND I THINK I NEED A REPAIR SEEING WHAT YOU HAD TO DO FOR AN AE ERROR CODE
@@karenfashaw8926hi sorry I’m having trouble finding your washer model. Ok Samsung Ae means there is something wrong with communication between the main board and display. You need to make sure all the wiring connections are intact and check if there is any water that has entered the wiring.
I have an LG washer dryer that does not have this front panel. The AE error keeps flashing I tried draining the machine from the little front flap. Some water came out but the error persists. Any suggestions to help with this?
Hi it’s because it’s detecting a leak somewhere on the washer. There is a sensor on the bottom/floor of the washer the detects water. You need to remove the back cover. Start the wash and have a look at where the leak is coming from once it starts washing. Be careful and don’t touch inside the washer as the power is still connected. Look for the leak then turn off unplug and confirm the leak
Hi...my washing machine shows the ae alarm, i've tried draining the stagnant water. but when restarted the washing machine won't turn on and there is still a code AE. What must i do
Hi! Opened up the panel but didn’t find any leak or pooled water. Tried detaching the cable from the sensor then back on again, however the AE problem persisted when I replugged the washing machine. What else can I do? Thanks.
it will reset one the water level from the leak has dropped. you can tilt the washer to one side that will drain out the leaked water and it will reset.
GUYS for This who have the 10,5kg Maschine without this shelf: try pulling out the washing powder compartment and clean it AND Lift up your washmashine from one side and let all water come out. IT WORKEDD
Again I want to say thanks for this video ! 😊🙏🏻🙏🏻
Thank you so much
Thank you!! I had a panicked moment thinking my clothes were all locked in and this solved my issue. I’m 99% certain it was caused by my cleaner who didn’t close the drain cap correctly after cleaning, it resulted in the washing machine leaking on the outside, so inside makes sense too with the seal not covering inside if it isn’t fully closed. I can not afford a call out right now so being able to ‘fix’ it even if it’s only temporary is a big relief!
Thanks for the help. Turned out that the rubber drain pipe had a hole in it due to it rubbing. I just cut it off and made it shorter. Easy fix and money saved.
Mate i thought i would be out of pocket by 800$$ but your video helped me today.. thank you :)
welcome glad it helped
Excellent! Thank you fixed in a minute! Exactly what you said it would be! Love from the UK
You're welcome!Glad it helped
Thanks so much, solved the wrong code in 5 min according to your video. Very easy to follow your instructions. Think the code or the water came because the dampers are worn (ordered new 5 days ago) and today I got the AE code wrong. Now it works again, did not look for dripping water as I know that the dampers are the cause (lowered the centrifuge speed to 600-800) and there were some extra small stones and other shit in the collector.
THANK YOU SO MUCH AGAIN!
welcome great to hear you fixed it. well done for keeping on fixing it
Excuse my ignorance but what are the dampers
You have just single handedly changed my mood in 10 minutes haha legend
Great explanation and wonderful clarity. Thanks for the video bro... you saved the day for us!
Excellent! From São Paulo, Brasil.
Hi Mr Washy Washy, your video is the best by explaining what AE actually is. Unfortunately, mine is a LG Top Loader 10.5 KG. The bottom part is very different. If you have a Top Loader video that show how to fix this AE issue will be life saver. My country is on lock down. Electrical service shops are all closed... :(
Thank you, Didn´t think it was that easy to get to the sensor.
Welcome glad it helped
Hello sir please we change the gasket rubber on it but the one we put there is not the same as the one came with,firstly the new one we put back the have a big hole on top.. i dont know maybe that's the cause @@askmrwashywashy
Thanks so much for this video 👏🏻 You’re a lifesaver！I managed to rescue my laundry and at least complete the washing cycle without it trapped inside the washer!
Welcome, glad you were able to finish your washing. Hoping you get to fix the AE error issue
You are my personal Weihnachtsmann. Thank you so much.
Thanks, it helped me a lot. It saved me a lot of money 👍. I’m sorted now. Is fixed at no cost.
Perfect! We had a water filter leak on top of the LG washing machine and flood the kitchen. Simple fix once you know. Cheers
Glad it helped!
Thank you so much, because of you now I can add washing machine repairer on my resume 😊 I followed exactly your tutorial and it was a gem Thank you thank you thank you for saving me dollars
Thank you for posting this! Helped a lot!😊
Very good explanation. Thank you very much for this Video. 😁🙏
You are welcome 😊Glad it helped
Great video solved a major problem👍
Glad it helped
Thank you for this video. I can now add washing machine repair to my mum/wife resume. I suspect I need to replace my float sensor as the contacts appear to have some corrosion and is still tripping even when the float isn't activating the switch
Merci beaucoup. Vous m'avez sauvé la vie.
Thank brother, am proud of your. Video. In Kenya
thanks mate, hope its been helpful
Thank you for this video. I fixed my machine and thankfully didn’t need to pay big dollars on a repair. 🙏🏻
Welcome I'm so glad you saved your machine & wallet
Excellent video easy to understand
Thank you so much , it did work as exactly as you instructed ,
Thanks brother your videos are so helpful
Welcome glad you find value in them
Lovely fixing of the Error
glad you like it
1000 of thanks 🙏🏻 You helped us so much!
Thanks for this video share. Regards From Indonesia
Its really useful. Really appreciate ur tips
Welcome glad it helped
Hi there, this video has been super useful to see where the leak is, but I’m not sure how to fix it and what the problem is with my washing machine. There is a leak from just above the mother boar, leak from the plastic material inside towards the front that is the same colour as the mother board.. could you please help
Me? Thanks a ton 😊
Hi I have same machine pcb.problem is drain moter start as soon as machine power on and start drain water .please advice how to reapir this fault.
KAREN FASHAW
VERY WELL DONE BUT I HAD AN AE ERROR CODE BEFORE AND I JUST SIMPLY SWEGG THE HOSE BACK AND FORTH IT WORK FOR A COUPLE OF YEARS NOW IT IS BACK AND I THINK I NEED A REPAIR SEEING WHAT YOU HAD TO DO FOR AN AE ERROR CODE
Hi Karen. What’s your model number ?
@@askmrwashywashy
model# way56drhdsu/aa samsung top loader
@@karenfashaw8926hi sorry I’m having trouble finding your washer model. Ok Samsung Ae means there is something wrong with communication between the main board and display. You need to make sure all the wiring connections are intact and check if there is any water that has entered the wiring.
Cheers mate! Always thankfull fornstuff like this!
I have an LG washer dryer that does not have this front panel. The AE error keeps flashing
I tried draining the machine from the little front flap. Some water came out but the error persists. Any suggestions to help with this?
Hi it’s because it’s detecting a leak somewhere on the washer. There is a sensor on the bottom/floor of the washer the detects water. You need to remove the back cover. Start the wash and have a look at where the leak is coming from once it starts washing. Be careful and don’t touch inside the washer as the power is still connected. Look for the leak then turn off unplug and confirm the leak
@@askmrwashywashy thank you for your prompt reply. Much appreciated
Hi...my washing machine shows the ae alarm, i've tried draining the stagnant water. but when restarted the washing machine won't turn on and there is still a code AE. What must i do
Thank you. It worked❤
Hi! Opened up the panel but didn’t find any leak or pooled water. Tried detaching the cable from the sensor then back on again, however the AE problem persisted when I replugged the washing machine. What else can I do? Thanks.
have you unplugged the sensor and tried to run it without the flood sensor connected ?
Thank You Sir! subbed.
Thanks for the help !
Welcome glad it helped
Can anybody tell me where is that black lead connected
Good information sir.
ty that help a lot
Glad it helped
Ty so much from the germany
Sir pls help. Water keep coming out from the soap drop as soon I try to wash. And the next thing ( AE ) start showing
Hi does it keep coming out continuously and doesn’t stop ?
how did you reset??
Hi can somebody tell me why my washer shows ff error even if water is at 26°C
شكرا 💕
Fixed thankyou
Great glad it’s fixed
How do you reset the sensor
it will reset one the water level from the leak has dropped. you can tilt the washer to one side that will drain out the leaked water and it will reset.
Good video - thx!
Thank you!
Thanks a lot brother..
GUYS for This who have the 10,5kg Maschine without this shelf: try pulling out the washing powder compartment and clean it AND Lift up your washmashine from one side and let all water come out. IT WORKEDD
What do you mean by „Lift up”? I am not Hulk! Like literary 😂 strait up ore, can I just move it side words?
Thanks so much
شكرا لك
Thank you
You're welcome
Que chimba de contenido.
My split is just under the drawer... So I gather I have to take the whole front off
HARİKA BİLGİ.
thanks
Welcome
You legend
Здравствуйте, ещё бы объяснение на русском языке,что вы сделали с датчиком?
KAREN FASHAW
GOOD MORNING I DO NOT HAVE THE MODEL HERE AT WORK IT IS AROUND EIGHT YEARS OLD SAMSUNG TOP LOADED TITIAUM
Hi where you able to find your model number
Bu video için teşekkür ederim arızayı yaptım Allah hidayet versin
???
You didn't solve the problem?
👍🏽
I had 2nd time grr again too much water floor
Check your seal for a leak or might be a hole in the tub
Still water come out I tried look around but sometime on and off
My washing machine ate my clothes
👍👍👍👍👍👍👍👍👍👍👍
He talks way to much instead of showing how to repair this shit
😂😂😂😂😂😂😂😂😂😂
Good luck doing this by yourself.
Does what is says on the can.
You just saved me £150.
Thanks you
Thanks