PA System Tutorial: Ahuja Amplifier and Behringer Mixer Setup

PA System Tutorial: Ahuja Amplifier and Behringer Mixer Setup
The Ahuja SSA-250M is a high wattage PA mixer amplifier that can deliver 250 watts of output power. It has 6 microphone inputs and 2 auxiliary inputs for connecting various audio sources. It also has a line input for connecting the output from any external mixer or permitting the SSA-250M to be used as a booster power amplifier. It has a built-in circuit breaker for protection against overload and short circuit. It can also operate on DC power from a car battery in case of AC power failure. It has a speaker output selector switch for choosing between 4 ohms, 8 ohms, 70V, and 100V speakers. It also has bass and treble controls for adjusting the sound quality. ¹²
The Behringer PMP2000 is a 14-channel powered mixer that can deliver 800 watts of output power. It has 9 microphone inputs and 5 stereo line inputs for connecting various audio sources. It also has a 24-bit multi-FX processor with 100 presets for adding effects to the sound. It has a 7-band graphic equalizer for adjusting the frequency response. It has a feedback detection system for identifying and reducing feedback. It has a speaker protection circuit for preventing damage to the speakers. It also has a stand-by switch for muting all microphone channels during breaks. ³⁴
To install the Ahuja amplifier and the Behringer mixer, you will need the following items:
- A pair of speakers that match the impedance and power rating of the amplifier output.
- A pair of speaker cables that are long enough to connect the speakers to the amplifier.
- A microphone and a microphone cable for each microphone input that you want to use.
- A stereo audio cable for each stereo line input that you want to use.
- A power cord for the amplifier and the mixer.
- A car battery and a battery cable for the amplifier if you want to use it on DC power.
The installation steps are as follows:
1. Place the amplifier and the mixer on a stable and flat surface, away from heat and moisture sources.
2. Connect the power cords of the amplifier and the mixer to an AC outlet. If you want to use the amplifier on DC power, connect the battery cable to the car battery and the amplifier.
3. Turn on the stand-by switch of the mixer and the power switch of the amplifier.
4. Connect the speakers to the amplifier using the speaker cables. Make sure to match the polarity (+ and -) of the speakers and the amplifier. Also, make sure to select the appropriate speaker output on the amplifier switch (4 ohms, 8 ohms, 70V, or 100V).
5. Connect the microphones to the mixer using the microphone cables. Plug the cables into the XLR inputs of the mixer and the microphones. Adjust the gain knobs of each microphone channel to set the input level.
6. Connect the stereo audio sources to the mixer using the stereo audio cables. Plug the cables into the RCA or 1/4 inch inputs of the mixer and the audio sources. Adjust the level knobs of each stereo line channel to set the input level.
7. Connect the line output of the mixer to the line input of the amplifier using a stereo audio cable. Plug the cable into the RCA or 1/4 inch output of the mixer and the RCA or 1/4 inch input of the amplifier.
8. Turn off the stand-by switch of the mixer and the power switch of the amplifier.
9. Adjust the volume knobs of the mixer and the amplifier to set the output level. You can also use the FX, EQ, and tone controls of the mixer and the amplifier to enhance the sound quality.
10. Test the sound system by playing some music or speaking into the microphones. Check for any distortion, feedback, or noise. If you encounter any problems, refer to the troubleshooting guides of the amplifier and the mixer. ⁵
I hope this information helps you with your TH-cam video. If you have any questions, feel free to ask me. 😊
¹: [Ahuja Sound Solutions](^1^)
²: [Mastering Audio: Exploring the Ahuja SSA-250M 250W Mixer Amplifier](^2^)
³: [Behringer PMP2000 User Manual]
⁴: [Behringer PMP2000 Product Page]
⁵: [How to Connect a Mixer to an Amplifier]
#device #gadgets #ahuja #amplifier #unboxing #review #tech #cable #soundsystem