The Midas L6 500 Series Chassis and Why I decided to Send It Back
ฝัง
- เผยแพร่เมื่อ 19 ส.ค. 2024
- Today I share my reasons why the Midas L6 500 series chassis is not for me and my reasons to send it back to Sweetwater. The Midas L6 500 series chassis is a great gateway 500 series chassis that is well made. Except for a few minor issues this chassis is and outstanding bargain. The biggest issue I faced was that the power supply created a electro magnetic hum problem when using it with my high quality preamps. Knowing that I wanted to permanently rack a series of compressors and having daisy chained a preamp compressor unit as an experiment the hum would not allow me to utilize it in that fashion. That’s my experience and your’s may differ. If you don’t have as comprehensive a setup as I do then you should give this chassis a try.
-------------------
Have a question for me? Leave a comment on my Social media
Facebook: / brownstone-recording-c...
Twitter: / warrenhmusic
More About me
www.therhythmst...
Dove Award Nomination: en.wikipedia.o...
Mixonline Article Brownstone: www.mixonline....
Sonic Scoop Article: sonicscoop.com...
---------------------------
Some of my Favorite Websites:
www.ebay.com
www.rupertnevedesigns.com
www.aes.org
www.pasic.org
www.sweetwater.com
www.aes.org
www.jdkaudio.com
-----------------------------
Current Recording Studio Setup:
DAW 1: (Scoring Station) Pro Tools 12, Logic Pro X & Sibelius using a Focusrite 2i4
DAW 2 : (Recording Station) Pro Tools HD8 WHY? It’s fully paid for.
Microphones: Neumann, AKG, Shure, Audix, Rode,AEA, Royer
Headphones: AKG, SONY
Monitors: Auratone, Dynaudio, Mackie, TOA, Tannoy
Monitor Management: Personus Monitor Station
Headphone Monitoring: Furman
Vintage Gear: DBX, Valley International, DOD, Lexicon, Alesis
Preamps: Focusrite, NEVE, Fredenstein, Fivefish, Valley International
#midasl6 #500series #api
Hi Warren, I've recently stumbled across the 500 series form factor and have been doing a lot of research about both it and other rack components as I start bringing together ideas of what my ideal home studio rack might look like and consist of. One of the big questions on my mind was about these Midas chassis and specifically their power supplies, as otherwise they seem like pretty nice products. I did notice when comparing to other much more expensive units that those higher-end chassis mentioned power supply shielding while the Midas do not. So this video is very informative and helpful! I am quite competent when it comes to stuff like electronics modifications and soldering, so I will explore what kind of options there are for modding the power supplies of the Midas chassis before I write them off for my application.
Also, I haven't yet watched your original review so I'm going to do that right now. Really like your presentation style and honest, direct feedback, so count me as a subscriber! Thanks!
Adam, thanks for watching and subscribing. All the best✌🏾🙏🏾👍🏾
Thanks for making this video. I almost bought the L6 500 but realized that i also would have racked it next to another preamp. Thanks for watching out for us consumers! I also liked your video on calibrating preamps
Great review, thanks. One production thing; I thought the constant drum groove was very distracting. You were sharing some great information and the groove just got in the way. As a video producer, I might suggest you use it at the intro, outro and maybe a few spots for accent. You are plenty interesting without the boom-ching! 😎
Cool, thanks!
You don't need to be handy with electronics to resolve the issues you personally had. A screw is a screw. Just change them out to cross or thumb style screws and your set. As far as the PSU noise goes. I have had no issues with my L6 and it's racked in between another channel strip and a headphone amp. But here's the easy fix. Copper shielding tape. It's allot of screws. But remove the lid and shield all the way around the inside of the module bay. I actually have a shielded module in Bay 6 and it's perfectly quiet. To be honest the PSU itself is not creating any noise, the rails are quiet. It's the module receiving magnetic interference. Which is a symptom of the module, not the PSU. All easy fixes though. For the money, these cannot be beat. Sorry to hear they didn't work for you. I know we all have slightly different scenarios in our shops.
Thanks for watching 🙏🏽✌🏽
You can go to home Depot and match up the same length, diameter, and thread pitch ordinary head machine screws.
True true🤔✊🏽👍🏾
man torx screws are the best
Wow, thank you man... I almost pulled the trigger on this unit.
Thanks for watching ✌🏾🙏🏾
Had the lindell 506 then recently got the API and I noticed audible differences between a mix I printed with the exact settings from my xfilter racked in the lindel vs Api 6 slot
How much of a difference? And what did that difference feel like?
@@AnthonyMartinsRock Lower noise floor and clearer frequency reproduction.
@@cptboogy That must be so disappointing! Every time I see a new product that is lower priced and promising great or even basic features, I am disappointed by poor reviews that are starting to sound the same. Either the noise floor is raised quite high or there is a noticeable hiss sound. Then there are other issues that included hum interferance or dropouts in audio! Believe 99% of the problem is the power supply since not having enough power to a pre amp will mean that you will require more gain to get sound levels the way you may want which will mean you bring up the noise floor. Inadequate shielding will lead to the interference problem which I have fixed myself in even expensive cable by rewireing/soldering. interesting... I have a good signal chain already with an /SSL SiX > Prism Orpheus >< Protools/ but wanted to add a Neve 1073LB instead of buying the 1073SPX. I thought this was simple as picking up a basic box which should be an easy option but nooooo after looking at the cost of a good unit with a solid power supply that will not be prone to low headroom inducing power issues, the cost rises to make the units with only 2 - 3 slots pointless and then you may as will look at the 6 slot units that cost only 100$ more or so. Im leaning towards the Neve r6 at the moment or just buying the 1073 SPX
@@AnthonyMartinsRock Served me well with just a couple units, as soon as i loaded it up then the shortcomings were obvious.
@@AnthonyMartinsRock i read somewhere that different power supply sounds different, believe it or not
I actually just picked one of these up have it rack mounted with many preamps and compressors above and below. I have 4 slots filled, ssl six, Midas eq, dox 520 and a Fredenstein compressor. not a single hum hiss or anything. I must be the lucky one. I have heard people have problems like this but I also have heard about these problems with other chassis. There is a ground lift button on the back.
Hey Dan! Thanks for watching and your comments ✌🏽🙏🏽
Great sensible review -- thanks!
Thanks for watching🙏🏽✌🏽
Thank you for your review.
Thanks for watching
Thanks for that info😊
Thanks for watching✌🏾
Good video. Recently found your channel. Good info on this. Subbed.
Thanks!
Julian thanks for watching
Thank you for this review. I was considering getting one of these but was wondering about hum issues.
Brother Ken! Thanks for watching✌🏽
Do you know if the api 550a will work with the Midas l6 please ?
It should. There’s enough power available to drive most modules. Thanks for watching and your comment 🙏🏽
so which 500 series PS Chassis do you recommend? i also heard 500 Chassis also sound different too from someone who did a shootout, believe it or not. heard API was the best sounding one.
I would recommend API. Thanks for watching
Hi Warren I decided to go with AMS 500 1073 module but which case to buy. Lot of people say Midas has noise... Is this true? Should I go with Original API 500 case or maybe Rupert Neve R6 500 Rack case?
I’ve found the Midas to be noisy in certain circumstances. If you budget permits buy the 8 slot API. If not then buy the Midas from a dealer that gives a refund.
Is the Radial 6 slot chassis good? Thanks!
Radial is known for making quality equipment. Thanks for watching✌🏾
Which 500 series brand you recommend
Can’t go wrong with the 8 slot API. Thanks for watching ✌🏽
@@WarrenHenry heritage or bae ok too?
It is marketed as a mobile unit, well it here anyway.
Hahaha THEIR TIGHT
Ha! Had to keep kid friendly. After all it’s a family channel.😁