how to change main dipped bulb on BMW 3 Series f30 f31
ฝัง
- เผยแพร่เมื่อ 16 ต.ค. 2024
- #bmw3series #bmwf30 #bmwf31 #headlightbulb #tmm #diytaj #carcommunity #carhacks #howtodoit #easyfix #carcommunity #CommissionsEarned #ad #diy #tajmotormedics #happynewyear #newyear2023
BMW 3 Series 2015
Sixth generation (F30/F31/F34/F35; 2011-2017)
How to replace headlight bulb on bmw f30 f31
BMW 3 series main dipped bulb replacement
Headlight bulb replacement on bmw 3 series f31
H7 bulb can be found on the link below.
www.amazon.co....
AMAZON ASSOCIATES DISCLOSURE
Taj Motor Medics is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com
⚠ DISCLAIMER: While Taj Motor Medics strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. Taj Motor Medics is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
For more information please Visit our Website.
1link.to/tajkhan
1link.to/taj
Please subscribe for more videos
![“อาร์ต พศุตม์” เกือบเอี่ยวทุกคดีดัง เอ๊ะไว้ก่อน ไม่มีอะไรได้มาง่ายๆ | แฉ 16 ต.ค. 67 [2/3] | GMM25](http://i.ytimg.com/vi/0Gx-0-kUBv8/mqdefault.jpg)
Here are my tips…. 1. Try disengaging main beam bulb first, when you have done this you will understand how the H7 single tab fitment works and it will make working blind in the wheel arch 100 times easier , I promise
Here’s what I did
F30 headlight bulb change.
Dipped bulb, turn wheel out. Push down 2 hatch clips so they click and remove hatch.
Rotate Circular cover and remove.
H7 bulbs have one retaining tab that sits facing upright in housing with two metal clips retaining lower circular area of bulb
Apply upward pressure to black bulb holder ( keep it on bulb as it helps leverage) to release lower tabs , they click and bulb can then be released, remove bulb holder from bulb ( can be stiff) and replace with new bulb.
If you can’t see things easily for replacing the bulb use a mirror in the wheel arch or look from outside headlight to aid getting the bulb into the housing
Fit single H7 tab upright into bulb housing and press bulb holder downwards to engage lower clips with a click
Replace circular and hatch covers.
Main beam is easy, just circular cover to remove and lift up bulb holder to disengage bulb as above.
Hi Taj. Thanks for the upload. Very explanatory, great camera work! As others have said, I wish manufacturers would make bulbs easier to access. It's a real pain doing this stuff at the side of the road when it's freezing cold and wet.
Repair shop wanted $140. I watched your video and a few others and did it myself. TY!
Thank you for mentioning that the bulb only locks in one way on the low beam. I was struggling for half an hour, but I was able to get the new bulb in just seconds after watching this video.
This video explanation was very helpful, thank you!
Taj struggled to change the bulbs using another video, yours was much better, very well explained and good use of camera. Thanks a million mate 👍🏼
Hi Taj, I have recently discovered your channel. I would just like to say a massive thank you for all of your videos they are extremely helpful! I have started a new job at a car store where we offer bulb replacement services, and as I’m new to doing this type of thing, your videos are so beneficial! All the best for the new year.
Wow, thank you! 😊 best of luck 🙏🏽
Brilliant video mate. Thanks
Great Video! Thank you! Absolutely helpful!
The bulb holder came out too....such a session
Cheers Taj, much appreciated 👍
Thank you for this clear video buddy
thank u I just replaced my bulbs with h7 leds. One question are both high and low beam h7s on the bmw 3? and are high beams just the reflector or is the viltage different?
Thanks helped a lot. Done it on my drive turn the wheel outwards. Hardest part was taking the first cover off 😂. Rest was super easy
They Taj, I managed to change mine in less than 20 minutes. I would hace been charged a fortune. Your videos are very informative. Keep up the good work
Really helpful video, thanks.
Why do manufacturers make it so awkward for basic jobs! Should need to jack a car up tljust to change a bulb! Really useful as I'm looking to upgrade my bulbs.
You don't need to do that, just to turn The steering Wheel
Great vid... helped me out.. thanks
Maaaan I can't even stick my whole hand in the hole. No pun intended! This is a task for guys with little hands.
Nice clear video 👍
Awesome 👏🏻 thank you
When I pull out my lightbulb it has a metal bracket around it & I have to pull it apart….i guess the one I have is different but the bulb itself is the same….i can’t just put my bulb in the connector & push it in because it won’t stay, i have to use that annoying bracket…..my car is a 2017 BMW 330e
Thanks for the help😊
Hi, I pushed too hard and now the reflector is loose within the whole housing. The high beam reflector also is loose.
Any ideas how I can fix this?
Right on!!
Paldies par informaciju
What's that low beam bulb called for the 320i ??
Hi on this year model the bulb required is H7. Thanks 🙏🏽
Super 100%
Followed your video but the bulb is loose.
Hi, maybe it’s not pushed in properly. There is a certain way you need to push in otherwise the beam image will be incorrect.
Absolute worst design ever! An hour later, and I concede defeat! I am able to get to the point of removing the wiring clip, but the bulb is not budging…and I have bled enough on the car as it is…
Mine just gone off now 🤣
You have to just give it a good wiggle and pull. The thin metal rusts and it sticks together with the plug that’s why it feels stuck
Thanks Awesome video & easy to follow commentary 👍💯👏👌🫡
Thanks